BrowseSAP Cloud Application Programming Model
Everything in CAP
60 of 1047
Domain: Integration & Messaging
Signals
Content: 2
More
Group by: Capability
EntryBySignalsLast activity
Async processingSAP and community
Automate BTP Custom Domain certificates using Let's EncryptAutomate BTP Custom Domain certificates using Let's EncryptCertificate lifecycle management as an application: a CAP backend, a Fiori elements UI, the Custom Domain service, Cloud Foundry routes and the Job Scheduler, so requests, renewals and cleanup stop being manual. Part two of the author's BTP Toolbox.Ben, published 2026-03-19
Quick tip: event/task scheduling in CAP Node.js (in alpha state)Quick tip: event/task scheduling in CAP Node.js (in alpha state)A note on something spotted in capire's May 2025 release notes rather than a technique: CAP Node.js is to support scheduling events — actions and functions included — with callbacks, currently alpha and explicitly subject to change. Useful as a dated marker of the core moving into ground the community has been covering, and the alpha caveat is the point rather than a footnote.published 2025-10-30
SAP CAP(Cloud Application Programming)开发框架概述SAP CAP(Cloud Application Programming)开发框架概述A Chinese-language walkthrough of CAP built mainly from CAPire's own "About CAP" page: CDS entities, associations, compositions and aspects for data modelling, with an extend Books with @restrict: [{ grant:'WRITE', to:'admin' }] aspect as its authorization example; CQL and CQN queries shown against both a local service and OData's $select/$expand; and the service-and-event model — this.on, this.emit, srv.on — that carries CAP's async processing. It closes with the author's own setup: installing @sap/cds-dk, scaffolding a bookshop project with cds init, and running it with cds watch against local SQLite, mocked authentication and file-based messaging standing in for HANA Cloud, IAS and Kafka.ArthurYang, published 2024-01-07
SAP Job Scheduling Service + Cloud Application Programming Model application (CAP) + SAP Authorization and Trust Management Service (XSUAA)SAP Job Scheduling Service + Cloud Application Programming Model application (CAP) + SAP Authorization and Trust Management Service (XSUAA)Calling an unsecured endpoint on a schedule is trivial; this is the same thing once the endpoint is protected. The interesting part is the caller — the Job Scheduling Service is not a person, so CAP's pseudo-roles are where the post spends its time, and $XSSERVICENAME has to match the scheduler's own instance name.former_member412792, published 2022-12-12
DestinationsSAP and community
Architecting Complex Real Life Business Scenario on SAP BTP with ease [ Targeting Multiple backend S/4HANA Systems utilizing Principal Propagation ]Architecting Complex Real Life Business Scenario on SAP BTP with ease [ Targeting Multiple backend S/4HANA Systems utilizing Principal Propagation ]The opening of a three-part series on reaching more than one S/4HANA system from one CAP application with the user's identity carried through. This part sets up the business problem; the propagation itself is in the parts that follow.mohit_bansal3, published 2022-11-25
BTP CAP : How to Connect to Remote Services Locally in CAP ApplicationBTP CAP : How to Connect to Remote Services Locally in CAP ApplicationThe same problem four years earlier: a CAP application that consumes a remote service, running locally against the real thing rather than against a mock.showkath_naseem, published 2022-12-12
CAP Foundry: Engineering SAP CAP Applications from Business Intent with Guardrailed AICAP Foundry: Engineering SAP CAP Applications from Business Intent with Guardrailed AICAP Foundry is a prototype that generates a CAP Node.js project with SAP Fiori elements from a written business requirement, discovering the actual data shape from a chosen source — SQLite, a configured SAP HANA HDI container, offline EDMX, live OData through the SAP Destination service, or approved SAP BTP ABAP objects — instead of inventing one. The generated application can carry a Fiori draft lifecycle with optimistic concurrency via ETags and annotation-driven Fiori elements list and object screens, localized independently of the underlying service contract. Attachments can be added with upload, download and delete, gated on a malware-scan status, and the generated project still has to compile, build and pass its generated tests before the run is accepted.Shahid, published 2026-08-20
CAP Service to Fetch + Create Sales Order in S4 HANA Public CloudCAP Service to Fetch + Create Sales Order in S4 HANA Public CloudA CAP Node.js walkthrough imports SAP S/4HANA Cloud's Sales Order OData API with cds import, adds csrf handling to the generated service definition, and forwards a custom REST action's reads and writes to the remote proxy through cds.connect.to, the pattern Service integration covers. The mta.yaml binds the SAP S/4HANA Cloud extensibility service and a SAP Destination service instance so the S/4HANA Public Cloud system's address and credentials stay outside the application, per Destinations.Mujeeb, published 2023-05-30
Connect to Public Cloud API in Node.js via Authorisation CodeConnect to Public Cloud API in Node.js via Authorisation CodeThe authorisation code flow rather than client credentials, which is the harder half: a service key, an XSUAA instance bound to the CAP app, and a destination, with the author saying plainly that this was challenging and they hope it saves somebody the same time.Egan, published 2025-07-22
Consume Remote Services in a Full-Stack CAP ApplicationConsume Remote Services in a Full-Stack CAP ApplicationExtending the Developer's Guide application with a remote S/4HANA service — connectivity, importing the Business Partner API, and running against it. SAP publishes this as four separate paths: mock server or real S/4HANA Cloud, times Cloud Foundry or Kyma. One entry covers all four, because the difference between them is which backend and which runtime, not what you learn.SAP
Consume SOAP Web Services in SAP Cloud Application Programming ModelConsume SOAP Web Services in SAP Cloud Application Programming ModelCalling a SOAP service from CAP — the case the remote-service story does not cover, since CAP's own import path speaks OData and OpenAPI.SAP
Consuming data from SAP Datasphere in SAP BTP CAP ApplicationsConsuming data from SAP Datasphere in SAP BTP CAP ApplicationsDatasphere as the source a CAP application reads from — the case for it being that Datasphere already unified the SAP and non-SAP data, so the application does not have to. From a real project.sudheer-tammana, published 2025-06-03
Establishing connectivity between a local CAP runtime and on-premise systemsEstablishing connectivity between a local CAP runtime and on-premise systemsReaching S/4HANA, an on-premise HANA or any HTTP service from a CAP process running on your laptop — the case where the connectivity proxy the platform provides is not there and the tunnel has to be arranged.vLeonkev, published 2025-10-15
Expose S/4HANA Cloud OData API as an MCP Server via CAP Node.jsExpose S/4HANA Cloud OData API as an MCP Server via CAP Node.jsA step-by-step walkthrough that wraps SAP S/4HANA Cloud's Outbound Delivery OData v2 API in a CAP Node.js service and exposes it through @cap-js/mcp, so an MCP client can list the generated tools, query the delivery entities and call a custom createDelivery action over JSON-RPC. The remote S/4HANA connection is configured two ways in package.json: direct Basic Authentication credentials for local hybrid testing, and a named BTP destination for the app once deployed to Cloud Foundry.Jacky_Liu1, published 2026-07-29
Extend SAP SuccessFactors on SAP BTP with CAP - Import SAP SuccessFactors OData Services definitionsExtend SAP SuccessFactors on SAP BTP with CAP - Import SAP SuccessFactors OData Services definitionsWalks through importing the ECEmployeeProfile and PLTUserManagement OData services from SAP API Business Hub into a CAP project: downloading their EDMX files, running cds import in SAP Business Application Studio to generate the CSN under srv/external, and pointing the resulting cds.requires entries at a destination. The second half creates a destination and an XSUAA service instance on BTP and binds their service keys into a default-env.json file so the project can reach SAP SuccessFactors during local development.published 2022-03-21
Extend SAP SuccessFactors on SAP BTP with the SAP Cloud Application Programming ModelExtend SAP SuccessFactors on SAP BTP with the SAP Cloud Application Programming ModelTwelve tutorials, about two hours, building a side-by-side extension of SuccessFactors on BTP. The spine is remote services: importing the SuccessFactors OData service definitions into a CAP model, then treating them as entities the extension reads and writes through, rather than as an API called from a handler. Indexed as one entry because the parts only make sense in order.SAP
Extending SAP Sales and Service Cloud V2 Using CAPExtending SAP Sales and Service Cloud V2 Using CAPAn extension target that does not run on BTP at all — Sales and Service Cloud V2 sits directly on hyperscalers — so the separation between core and extension is enforced rather than encouraged. That constraint is what makes the post worth reading.Quablab, published 2025-07-09
From REST to Datasphere: A CAP-based Integration ApproachFrom REST to Datasphere: A CAP-based Integration ApproachThe reverse direction and a second attempt: the authors had already written data into Datasphere with a small FastAPI service on the OPEN SQL schema, and this is what changed when they rebuilt it on CAP.christian_willi, published 2025-09-30
Fullstack CAP Application with HANA Cloud (Decoupled Architecture) [Part-5]Fullstack CAP Application with HANA Cloud (Decoupled Architecture) [Part-5]The consequence of decoupling: with the back end live on its own Cloud Foundry route, the front end needs a BTP destination to reach it rather than a relative path. Short, and it is the join the architecture creates.sanjucs, published 2026-05-18
How to Call a Remote OData API from Your Local CAP Java ProjectHow to Call a Remote OData API from Your Local CAP Java ProjectThe Business Accelerator Hub sandbox called from a CAP Java project on a laptop, with a concrete finish line — a localhost URL that returns business partners. Everything needed to get there is listed, Maven and JDK versions included.Umezuki, published 2025-08-11
HTML5.Timeout for CAP destinations in mta.yaml longer than defaultHTML5.Timeout for CAP destinations in mta.yaml longer than defaultA page and a half about one property that has to be raised when a CAP destination is slower than the default allows — and it now opens with its own correction, dated October 2025, that the property is called timeout rather than HTML5.Timeout, credited to a commenter. The correction is why it is worth keeping.NilsJanen, published 2022-11-09
Implementing Dynamic Subaccount-Based Routing in SAP CAP with SAP BTP DestinationsImplementing Dynamic Subaccount-Based Routing in SAP CAP with SAP BTP DestinationsWhy environment variables are the wrong place for backend endpoints in a CAP application, and what replaces them: cockpit destinations resolved at runtime, with the subaccount or instance identified as the request is handled. The argument is about redeployment — an endpoint kept in the environment means a deploy every time it moves — and the shape it produces is one codebase serving several landscapes without a build per landscape.Dnyaneshwar Salve, published 2026-03-18
SAP BTP Destinations in a Nutshell Part 1 - Motivation & NoAuthentication DestinationsSAP BTP Destinations in a Nutshell Part 1 - Motivation & NoAuthentication DestinationsOpens a series on SAP BTP Destinations by walking through the simplest case, a NoAuthentication destination from one CAP Node.js app to another on Cloud Foundry, shown two ways: executeHttpRequest from @sap-cloud-sdk/http-client, and a manual sequence that reads the destination service's credentials from VCAP_SERVICES, fetches an OAuth token, and requests the destination by name before calling its URL. The manual path is written deliberately verbose to show what the Cloud SDK call does behind the scenes; later parts of the series cover the other destination types.JakobFra, published 2023-05-23
Secure Service Consumption Across HyperscalersSecure Service Consumption Across HyperscalersSAP's design for a workload on SAP BTP that calls Amazon Web Services or Google Cloud services with short-lived credentials instead of stored keys, which is the outbound side of authentication: the BTP application proving who it is to another cloud. On AWS it draws two paths, an ID token from Identity Authentication in Cloud Identity Services exchanged through AWS STS for an IAM role, or an X.509 certificate kept in SAP Destination service and presented to IAM Roles Anywhere; on Google Cloud only the token path, through Workload Identity Federation and an impersonated service account. It is drawn for those two hyperscalers only, and Microsoft Azure has no page in it.published 2025-05-14
Sending Emails from SAP CAP Applications with Any SMTP ProviderSending Emails from SAP CAP Applications with Any SMTP ProviderWalks through sending mail from a CAP application with no dedicated mail service: create an SMTP destination for a Gmail account in the SAP BTP cockpit, bind it to the Cloud Foundry app, and call the sap-cf-mailer npm package from a CAP service handler naming that destination. The SAP Destination service holds the SMTP host, port and app password so the handler code names only the destination, and the same handler sends plain text, an HTML body, or a message with a base64-encoded attachment.MaheshSirsat1708, published 2025-08-19
Surviving and Thriving with the SAP Cloud Application Programming Model: Local development hurdlesSurviving and Thriving with the SAP Cloud Application Programming Model: Local development hurdlesThree hurdles in running a CAP application locally: services mocked with cds run --with-mocks return no data across OData associations until the ON clause is hand-written into the imported CDS, an on-premise API reached through the SAP Cloud Connector times out because its proxy is part of destinations and connectivity and reachable only from inside SAP BTP, and a Fiori frontend served from the HTML5 Application Repository needs the HTML5 Repo Mock to reach a local backend at all. It closes with the launch configurations the author uses for debugging cds watch locally and attaching to a running Cloud Foundry instance.maxstreifeneder, published 2023-02-02
The ECC-to-CAP Starter KitThe ECC-to-CAP Starter KitA Devtoberfest 2026 session that builds a CAP service and a Fiori elements list report over an SAP ECC gateway service, on the argument that the CAP project, its contract and its UI survive a later move to SAP S/4HANA while the APIs behind them change. The service integration edge is the body of the demo: the metadata of the ECC flight service is saved as an EDMX file, imported with cds import so the model holds the structure and none of the data, projected read-only into a flight service, and one line of handler code forwards each read to ECC, with filtering, sorting and paging translated down to the older OData version the system speaks. The SAP Destination service edge covers the on-premise destination and the additional properties the walkthrough insists on, and the SAP Business Application Studio edge covers the full-stack dev space, the CAP project wizard, the service center plugin for picking up another OData service, and cds watch run under the profile that uses those credentials.published 2026-10-09
UI for the BTP Application Vulnerability ReportUI for the BTP Application Vulnerability ReportAn open-source SAPUI5 front end for SAP's Application Vulnerability Report API, backed by a CAP Node.js service that projects the external findings as an OData V4 entity and forwards each query with api.run(req.query). The CAP service reaches that API through a Destination service instance configured with OAuth2ClientCredentials authentication from a service key, so the address and credentials stay out of the application code.published 2026-02-10
Use the SAP Cloud SDK in the SAP Cloud Application Programming ModelUse the SAP Cloud SDK in the SAP Cloud Application Programming ModelReaching for the Cloud SDK from inside a CAP service, for the calls CAP's own remote services do not make.SAP
Useful CAP CDS and Fiori Commands to Accelerate Development and DeploymentUseful CAP CDS and Fiori Commands to Accelerate Development and DeploymentA command-by-command walkthrough of @sap/cds-dk's cds add and fiori add generators: cds add xsuaa writes an XSUAA security configuration from the CDS model's authorization annotations, and cds add hana together with cds deploy --to hana switches persistence from the default SQLite database to SAP HANA Cloud. cds add mta and fiori add deploy-config, from @sap/generator-fiori, build the Cloud Foundry deployment descriptor together, adding a destination-service block and an xs-app.json that routes the Fiori app's calls through a named destination.TiaXu, published 2022-10-19
Document outputSAP and community
Generating PDF on BTP CF using CAP and PuppeteerGenerating PDF on BTP CF using CAP and PuppeteerA headless browser rendering the PDF, which is the answer people reach for when the document is really a web page. The Cloud Foundry part is the difficulty: Puppeteer needs a browser in the buildpack, and that is what the post is actually about.ltomazeli58, published 2024-03-28
How to Generate and Download PDFs on the fly without persisting in CAP ApplicationHow to Generate and Download PDFs on the fly without persisting in CAP ApplicationStreaming a generated document straight to the client without writing it anywhere first — which sidesteps the retention question a stored file creates, and is the distinction worth having beside the attachments capability.HarsithKumarReddy, published 2024-06-18
Using Custom Actions to display PDF from SAP BTP Forms service into a CAP SAPUI5 applicationUsing Custom Actions to display PDF from SAP BTP Forms service into a CAP SAPUI5 applicationA requirement that arrived after the application was finished — render a PDF from the record currently open on an object page — and the join it needed: the Forms service bound to the CAP application, a custom action on the service, and a button on the object page header calling it.rodfior, published 2023-01-30
Event MeshSAP and community
Beginners Guide to Advanced Event MeshBeginners Guide to Advanced Event MeshA scenario-by-scenario walkthrough of Advanced Event Mesh, run through Cloud Integration iFlows: publishing and consuming queue messages, dead message queue setup with retry counts and acknowledgment modes, direct messages, durable topic endpoints and selectors, time-to-live, REST Delivery Points, replay by replication group message ID, parallel consumers with partition keys, and the request-reply pattern. Each scenario is built and verified step by step against a Solace trial account standing in for AEM.PriyankaChak, published 2025-07-24
Build real-time event-driven integrations for your enterpriseBuild real-time event-driven integrations for your enterpriseEvent-driven integration with SAP Integration Suite, advanced event mesh inside SAP Integration Suite: where events beat request-response, how publish and subscribe decouple systems, and what a phased move to event-driven integration looks like. Event Mesh as architecture; the abstract names no broker protocol and no CDS mapping. A TechEd 2026 session (Tuesday 27 October, Berlin), presented by Daniel Dorst and Karsten Strothmann, written here from SAP's abstract; the recording is not yet published.
Build your own event-driven scenario with advanced event meshBuild your own event-driven scenario with advanced event meshAn event-driven scenario built on SAP Integration Suite, advanced event mesh: queues, topics and subscriptions first, then filtering and event replay, in two parallel tracks, a guided one for newcomers and a second for experienced practitioners. It covers the brokered side of Event Mesh; which systems publish and consume, and which protocol the clients speak, is not stated. A TechEd 2026 session (Tuesday 27 October, Berlin), presented by Claudia Carabineiro, Emily Mui, Karsten Strothmann and Tobias Griebe, written here from SAP's abstract; the recording is not yet published.
CAP - Specifying the queues to be consumed from SAP Event MeshCAP - Specifying the queues to be consumed from SAP Event MeshWritten against the edge of the convention rather than the convention. CAP creates one queue per application and names it for you; this is the case where the queue already exists, belongs to someone else, or there is more than one of them. The oldest Event Mesh post indexed here, and the only one about taking the naming back.schardosin, published 2021-06-21
Complete Guide: Setting Up CAP Plugin for Advanced Event Mesh with OAuth AuthenticationComplete Guide: Setting Up CAP Plugin for Advanced Event Mesh with OAuth AuthenticationWritten because the plugin's own documentation stops short of the prerequisites and the author had to assemble them from three other sources and a help chapter. It joins them: the OIDC application in Identity Authentication, the OAuth profile in Broker Manager, the token checked before anything is wired, and only then the plugin. The author says plainly it came out of trial and error and was going to be a README.rpagni, published 2025-11-10
Event Add-On for ERP: All you need to know about the new Event StudioEvent Add-On for ERP: All you need to know about the new Event StudioA Devtoberfest 2026 integration-track session (INT-43) on Event Studio, the browser-based part of the Event Add-On for ERP that defines events in an S/4HANA or ECC backend without code and sends them to a broker. A custom sales-order event is built live — fields picked into a payload that is published as a CDS view entity, a trigger on a classic business object, a static topic — and arrives in a queue on SAP Integration Suite, advanced event mesh, which is where the Event Mesh edge holds. The rest of the demo covers health and exception monitoring in SAP Cloud ALM, the AsyncAPI definition replicated to Event Portal, and the AI assistant and MCP server now inside Event Studio.SAP Developers
Event enabling SAP Data Replication Framework with Advanced Event Mesh & AIFAEMEvent enabling SAP Data Replication Framework with Advanced Event Mesh & AIFAEMWalks through connecting SAP's ABAP-side Data Replication Framework to Advanced Event Mesh by way of the AIFAEM add-on, bypassing SAP Cloud Integration: a custom ABAP class maps business-partner replication data into AIF, which publishes it to AEM in CloudEvents format. The author's own disclaimer favours the standard pattern instead — a Standard DRF Replication through an Integration Suite iFlow with the AEM adapter — and presents this direct, custom-ABAP route only as a documented alternative.AlexPfeil, published 2025-08-21
Event-driven Extensions for SAP SuccessFactors on SAP BTP – Connecting the DotsEvent-driven Extensions for SAP SuccessFactors on SAP BTP – Connecting the DotsWalks through an event-driven extension for SAP SuccessFactors: Automated Configurations registers the SuccessFactors system against an SAP BTP account with an integration token, and a SuccessFactors custom integration then pushes events, such as an employee joining or leaving, to a topic in Event Mesh that a CAP application subscribes to. The SuccessFactors APIs themselves are downloaded as EDMX files from SAP API Business Hub and imported into the CAP project, the same EDMX-import path behind service integration, so CAP generates the client used to call them. A reference application, RunSmooth, ties Automated Configurations, Event Mesh and CAP together end to end.Former Member, published 2020-08-12
Event-Driven Multi-Tenant Architecture on SAP BTP with CAP and SAP Event MeshEvent-Driven Multi-Tenant Architecture on SAP BTP with CAP and SAP Event MeshThe two topics that are usually written about separately, taken together — because a shared broker is where tenant isolation stops being automatic. It starts from why microservices are decoupled at all, places Event Mesh among the four broker services BTP offers, and then works through what changes when the publisher and the consumer are multitenant.ale_biagi, published 2024-12-19
How to Perform Initial Loads from S/4HANA to Advanced Event Mesh with Odata PollHow to Perform Initial Loads from S/4HANA to Advanced Event Mesh with Odata PollWalks through building a Cloud Integration flow that polls the S/4HANA Business Partner OData API on a timer, splits the response into individual records, and publishes each as an event to Advanced Event Mesh through its adapter, with the topic set dynamically from a grouping property. Selects fields and expands associations with $select/$expand against an EDMX from the API Business Hub, and works around the OData V2 adapter's lack of JSON support by falling back to the HTTP adapter with an XML-to-JSON converter. Flags the trade-off: the pattern needs no backend change beyond activating the API, but the polled payload has to stay aligned with whatever event format the ERP pushes on change.AlexPfeil, published 2025-04-04
IntegrAItion: Event-Driven IntelligenceIntegrAItion: Event-Driven IntelligenceA Devtoberfest 2026 session, INT-33, whose line is that agents fail because they are not informed enough rather than not clever enough, and that events are how they get informed: what an event is, the source-broker-consumer split, notification against data events, and topic filtering as the thing that decides which agents are woken at all and what that costs in tokens. It covers Event Mesh as the concern — topics, subscriptions, filters and queues — and SAP Integration Suite, advanced event mesh as the product, down to its event portal and catalogue, the mesh and cluster managers and distributed tracing. The closing demo sends an S/4HANA product-defect event through the mesh to wake an agent in Joule Studio, which fetches what it still needs over MCP and reports to a person the next morning.SAP Developers, published 2026-10-07
Integrating SAP S/4HANA Invoicing with KSeF Using SAP Event Mesh and CAPIntegrating SAP S/4HANA Invoicing with KSeF Using SAP Event Mesh and CAPA concrete regulatory deadline rather than a demo topic: every Polish invoice has to pass through KSeF, the national e-invoice platform, and this proposes the route — S/4HANA business events onto Event Mesh, a CAP application consuming them and talking to KSeF. Short, and offered as an example to argue with.Yahor, published 2024-08-29
Migrating from ASANWEE to ASAAEMEE: From SAP Event Mesh to SAP Advanced Event MeshMigrating from ASANWEE to ASAAEMEE: From SAP Event Mesh to SAP Advanced Event MeshA migration walkthrough for switching an SAP ERP or S/4HANA on-premise system from classic SAP Event Mesh to SAP Advanced Event Mesh: new RFC destinations to the broker's REST, handshake and token endpoints, trusting its certificate, activating the AEM business configuration set, and re-pointing the NetWeaver Add-On for Event Enablement's outbound object and dynamic topic mapping at the new instance. It assumes the Event Add-On for ERP (ASAAEMEE) is already installed and covers only the technical cut-over, not setting up event publishing from scratch.Benedikt_Sprung, published 2026-02-13
SAP Codejam on Event Driven Build ProcessSAP Codejam on Event Driven Build ProcessA hands-on CodeJam walkthrough of an event-driven flow: a Business Partner creation event from a simulated S/4HANA Cloud system is published to SAP Advanced Event Mesh, where the author configures topics, queues and subscriptions and forwards it through a REST Delivery Point to SAP Build Process Automation, which runs a business process with a human approval step and an asynchronous callback to a third-party system. The event producer stays unaware of its consumers, with SAP Build acting purely as an orchestrator reacting to events.Sharathmg, published 2026-02-03
SAP Event Mesh: S4 HANA On-Prem and SAP CI(BTP IS) through WebSocket and WebhooksSAP Event Mesh: S4 HANA On-Prem and SAP CI(BTP IS) through WebSocket and WebhooksA step-by-step walkthrough of wiring Event Mesh to publish and consume events between an on-premise S/4HANA system and Cloud Integration, contrasting persistent queues (one subscriber, kept until consumed) against unpersisted topics, and WebSocket's AMQP transport against webhook delivery for the same queue. Two tested findings support it: a queue consumer running in continuous consumption mode receives a message ahead of a webhook on the same topic, and a message stays queued and is retried (almost 8770 times in under a minute, in the author's test) until the consumer processes it successfully.FarooqAhmed, published 2023-10-03
Unlock composable business using SAP Integration Suite, advanced event meshUnlock composable business using SAP Integration Suite, advanced event meshSAP Integration Suite, advanced event mesh as SAP's product for event-driven, real-time and loosely coupled integration between SAP and third-party systems, which the abstract ties to composable business architecture. The session is about that product and the Event Mesh concern it answers; the abstract states the positioning and no feature, topic or protocol, and a speaker from CCB Management Services is listed without a stated case. A TechEd 2026 session (Tuesday 27 October, Berlin; also IN111V, virtual), presented by Goran D. Stevanovic and Karsten Strothmann, written here from SAP's abstract; the recording is not yet published.
Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 1/2Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 1/2The theory half of a pair introducing cds-kafka: what the plugin is for and what it can do, with event-driven architecture set up as the reason rather than assumed. Nothing is deployed here — the running application is part two — so this is the post to read if the question is whether Kafka belongs in the picture at all rather than how to wire it.published 2025-01-02
Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 2/2Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 2/2The practical half: concrete use cases for cds-kafka, running locally and on BTP. It opens by placing the plugin among SAP's own event-driven offerings rather than beside them, which is the part that decides whether you reach for this or for Event Mesh — a comparison a plugin's own README rarely makes about itself.published 2025-01-13
NotificationsSAP and community
How To Implement Alert Notification Service in Cloud Application ProgrammingHow To Implement Alert Notification Service in Cloud Application ProgrammingA click-by-click setup of BTP's Alert Notification service against a CAP application. Operational alerting rather than business notification — the audience is whoever is on call, not the user — which is the distinction the Work Zone plugin here does not cover.Aditya12, published 2025-05-27
Receive Notifications from Amazon Simple Notification Service for SAP S/4HANA BTP Extension AppReceive Notifications from Amazon Simple Notification Service for SAP S/4HANA BTP Extension AppEmail notifications from a CAP application through Amazon SNS instead of anything SAP provides — a hyperscaler service used directly from the extension rather than through a BTP intermediary. The argument for it is stated as reach rather than cost: the extension gets the platform's services and the hyperscaler's at the same time.albertoliu1993, published 2022-10-14
Sending Emails from SAP CAP Applications with Any SMTP ProviderSending Emails from SAP CAP Applications with Any SMTP ProviderWalks through sending mail from a CAP application with no dedicated mail service: create an SMTP destination for a Gmail account in the SAP BTP cockpit, bind it to the Cloud Foundry app, and call the sap-cf-mailer npm package from a CAP service handler naming that destination. The SAP Destination service holds the SMTP host, port and app password so the handler code names only the destination, and the same handler sends plain text, an HTML body, or a message with a base64-encoded attachment.MaheshSirsat1708, published 2025-08-19
RFC connectivitySAP and community
Consume ABAP RFC Function Modules in CAPConsume ABAP RFC Function Modules in CAPCalling an existing RFC function module from CAP instead of asking somebody to build an OData service for it — which is the actual decision, since the alternative is custom development on the ABAP side for a function that already works.published 2025-03-28
Introducing open-rfc: Calling SAP RFC from Node.js Without the SDKIntroducing open-rfc: Calling SAP RFC from Node.js Without the SDKopen-rfc is a TypeScript and JavaScript RFC client for Node.js with no runtime dependencies and no SAP NetWeaver RFC SDK, written after SAP archived node-rfc and PyRFC and while the connector below @sap/cds-rfc needs an S-user, an SAP Build Code licence and a private registry. The history of RFC connectivity from Node.js is the first half; the second shows the package on its own, as an npm alias for node-rfc, and through an npm override as the connector below an unchanged @sap/cds-rfc. The 0.2.3 beta stops at direct application-server connections with password authentication and classic Unicode RFC: no message-server load balancing, SNC, tRFC, qRFC, bgRFC or server mode.published 2026-08-10
Service integrationSAP and community
#BTP #SAPCAP: Quirky Nuggets (N05-N06)#BTP #SAPCAP: Quirky Nuggets (N05-N06)On SAP BTP, Cloud Foundry Runtime, a one-shot PostgreSQL db-deployer app can be restarted by the platform's default port-type health check inside its 60-second timeout, re-running the deploy and duplicating data in the PostgreSQL database; setting health-check-type to process or http, via cf commands or the app's mta.yaml parameters, avoids it. In CAP, a remote service's entities are imported and consumed through cds.connect.to and queried via a projection, but its functions and actions cannot be projected: they must be redefined in the consuming service's own interface, with the handler forwarding the call to the remote proxy.published 2023-07-27
CAP Service to Fetch + Create Sales Order in S4 HANA Public CloudCAP Service to Fetch + Create Sales Order in S4 HANA Public CloudA CAP Node.js walkthrough imports SAP S/4HANA Cloud's Sales Order OData API with cds import, adds csrf handling to the generated service definition, and forwards a custom REST action's reads and writes to the remote proxy through cds.connect.to, the pattern Service integration covers. The mta.yaml binds the SAP S/4HANA Cloud extensibility service and a SAP Destination service instance so the S/4HANA Public Cloud system's address and credentials stay outside the application, per Destinations.Mujeeb, published 2023-05-30
CAP: Consume External Service - Part 1CAP: Consume External Service - Part 1Builds a CAP Node.js service from scratch that consumes the public NorthWind OData V4 service: cds import turns its EDMX metadata into a CSN model under srv/external, and a CatalogService projects Products from it with a custom READ handler that runs the request through cds.connect.to('NorthWind'). Shows the same projection working two ways — against a CSV mocked under srv/external/data with the <service>-<entity>.csv naming the framework expects, then against the real service once credentials.url is added to the CAP configuration and @sap-cloud-sdk/http-client is installed — and defers routing that connection through the Cloud Foundry Destinations service to the next post in the series.published 2020-05-26
Event-driven Extensions for SAP SuccessFactors on SAP BTP – Connecting the DotsEvent-driven Extensions for SAP SuccessFactors on SAP BTP – Connecting the DotsWalks through an event-driven extension for SAP SuccessFactors: Automated Configurations registers the SuccessFactors system against an SAP BTP account with an integration token, and a SuccessFactors custom integration then pushes events, such as an employee joining or leaving, to a topic in Event Mesh that a CAP application subscribes to. The SuccessFactors APIs themselves are downloaded as EDMX files from SAP API Business Hub and imported into the CAP project, the same EDMX-import path behind service integration, so CAP generates the client used to call them. A reference application, RunSmooth, ties Automated Configurations, Event Mesh and CAP together end to end.Former Member, published 2020-08-12
Extend SAP SuccessFactors on SAP BTP with CAP - Create the CAP ServiceExtend SAP SuccessFactors on SAP BTP with CAP - Create the CAP ServiceWalks through writing a service definition in SAP Business Application Studio that projects entities from an existing CDS model: one entity gets @odata.draft.enabled because Fiori Elements only shows CRUD actions on a draft-enabled entity, and a read-only projection of an already-imported SuccessFactors OData entity fails with the generic handlers because the call is delegated to the remote service, so a custom handler is needed. Running cds watch then serves the entities, drafts and $metadata at the declared service path.published 2022-03-23
Extend SAP SuccessFactors on SAP BTP with CAP - Import SAP SuccessFactors OData Services definitionsExtend SAP SuccessFactors on SAP BTP with CAP - Import SAP SuccessFactors OData Services definitionsWalks through importing the ECEmployeeProfile and PLTUserManagement OData services from SAP API Business Hub into a CAP project: downloading their EDMX files, running cds import in SAP Business Application Studio to generate the CSN under srv/external, and pointing the resulting cds.requires entries at a destination. The second half creates a destination and an XSUAA service instance on BTP and binds their service keys into a default-env.json file so the project can reach SAP SuccessFactors during local development.published 2022-03-21
SAP CAP Adapter to expose OData as custom REST ServiceSAP CAP Adapter to expose OData as custom REST ServiceWalks through consuming an external OData V2 service in a CAP project — cds import converts the Northwind service's EDMX into a CSN and cds.connect.to wires up the remote proxy — then re-exposing it as plain REST with the @protocol:'rest' annotation instead of OData's own envelope. Shows two ways to reshape the response, renaming and dropping fields in a CDS projection or rewriting the returned objects in a custom service handler, and remaps ?pageSize and ?offset onto OData's $top and $skip in that same handler.Former Member, published 2021-09-15
SAP CAP: Consume SAP API Hub Sandbox Data as an external service Part- 1SAP CAP: Consume SAP API Hub Sandbox Data as an external service Part- 1Walks through consuming SAP API Business Hub's Business Partner sandbox API from a CAP Node.js project: @sap/cds-dk's cds import turns the downloaded EDMX into a CSN model and a cds.requires entry, a projection service exposes it, and a custom handler forwards reads to the proxy through @sap/cds's cds.connect.to and bp.run(req.query). Reaching the sandbox needs the API key added as a header on that same credentials block, since the destination service that would carry it is left for a promised part two.DebashishDas, published 2022-03-17
The ECC-to-CAP Starter KitThe ECC-to-CAP Starter KitA Devtoberfest 2026 session that builds a CAP service and a Fiori elements list report over an SAP ECC gateway service, on the argument that the CAP project, its contract and its UI survive a later move to SAP S/4HANA while the APIs behind them change. The service integration edge is the body of the demo: the metadata of the ECC flight service is saved as an EDMX file, imported with cds import so the model holds the structure and none of the data, projected read-only into a flight service, and one line of handler code forwards each read to ECC, with filtering, sorting and paging translated down to the older OData version the system speaks. The SAP Destination service edge covers the on-premise destination and the additional properties the walkthrough insists on, and the SAP Business Application Studio edge covers the full-stack dev space, the CAP project wizard, the service center plugin for picking up another OData service, and cds watch run under the profile that uses those credentials.published 2026-10-09