Everything in CAP / Java
142 of 743
Domain: 3
Signals
Content: Nothing recorded
Java: Answers in Java
More
Group by: Capability
Domain Learning & ReferenceDomain Protocols & APIsDomain Developer ExperienceStill applies Nothing recordedClear all
EntryBySignalsLast activity
Error handlingSAP only
Beginners Guide to Advanced Event MeshBeginners Guide to Advanced Event MeshA scenario-by-scenario walkthrough of Advanced Event Mesh, run through Cloud Integration iFlows: publishing and consuming queue messages, dead message queue setup with retry counts and acknowledgment modes, direct messages, durable topic endpoints and selectors, time-to-live, REST Delivery Points, replay by replication group message ID, parallel consumers with partition keys, and the request-reply pattern. Each scenario is built and verified step by step against a Solace trial account standing in for AEM.PriyankaChak, published 2025-07-24
Don't "let it crash", is this the new CAP guideline?Don't "let it crash", is this the new CAP guideline?Dinu traces a change in error handling in CAP's Node.js runtime: @sap/cds@8.2.0 adds a cds.server.shutdown_on_uncaught_errors config flag, defaulting to true, but invoking an operation with an undefined variable no longer takes the server down, with or without the flag, where the same code crashed it on cds@6 and cds@7, and the author notes the old behaviour was already missing in cds@8.1. It still crashes with features.odata_new_adapter turned off to use the old OData parser, so it is the new OData adapter, like the REST adapter before it, that answers an uncaught error with a 500 instead of taking the process down.Dinu, published 2024-09-06
Effective Axios Error Logging for Robust SAP IntegrationsEffective Axios Error Logging for Robust SAP IntegrationsTwo logged failures printed side by side, and the point is made by looking at them: one tells you what went wrong and one does not. Axios buries the useful part of an HTTP error, and this is what to unwrap before logging it from a CAP service.Sahil2508, published 2025-08-31
SAP Cloud Application Programming Model（CAP）：カスタムロジックの実装 – Part 2SAP Cloud Application Programming Model（CAP）：カスタムロジックの実装 – Part 2A walkthrough of implementing custom logic in a CAP Node.js service for the capire bookshop sample, registering before, on and after handlers around the generated CRUD service for its Books and Orders entities. The before handler validates an incoming order's amount and runs a transactional CQN UPDATE to decrement stock, raising a 400 or 409 through req.error when the amount is invalid or no rows match; an after handler on READ appends a discount note to overstocked books.rasai, published 2021-01-01
GraphQLUnmapped
SAP CAP function and action with Unstructured/Dynamic Type Input/OutputSAP CAP function and action with Unstructured/Dynamic Type Input/OutputA CAP action or function can take or return an unstructured type: annotate the service @protocol: 'rest', declare the parameter or return value as @open type object {}, and a handler shapes the payload however a given request needs, shown here with a bound action and a function that returns a different structure per input. The text states plainly that OData V4 and GraphQL services require a fixed structure for action and function parameters, so the dynamic type works only over CAP's REST protocol.published 2022-12-08
SAP CAPv7 - Node.js Highlights and ExperiencesSAP CAPv7 - Node.js Highlights and ExperiencesAn account of upgrading a 100+ table CAP Node.js project from v6 to v7, working through breaking changes in @sap/cds 7: event handlers now always receive an array, service paths move under /odata/v4/... unless serve_on_root is set, and cds-serve replaces cds run. It goes deepest on the GraphQL plugin, @cap-js/graphql: the /graphql endpoint it serves, Composition results wrapped in a nodes connection, and offset-based pagination reached through OData's top and skip rather than GraphQL's own limit and offset.published 2023-08-03
SAP GraphQL in CAPm (node.js)SAP GraphQL in CAPm (node.js)Adding the GraphQL protocol adapter to a CAP project when it was new — an entity, some data, the feature switched on, and a check that it answers. Short, and it is the earliest account here of CAP speaking something other than OData.enric101, published 2021-11-29
September 15th: What's New on developers.sap.comSeptember 15th: What's New on developers.sap.comThomas Jung walks through a week of changes aimed at agentic consumption of developers.sap.com itself: the hosted MCP server gains a published .well-known/mcp.json manifest, curated tools (search_tutorials, get_tutorial_step with a Markdown format option, search_channels), and a listing in the ORD catalog beside its OData, REST and GraphQL APIs. It also documents the site's existing A2A endpoint for the first time and ships a way to turn a tutorial into an installable, cryptographically signed AI Skill with a generated verification script, both concrete instances of agent tooling; separately, five broken GraphQL example queries were fixed and the full SDL is now served, and new sitemap.md, llms.txt fixes and ORD entries round out the site's own metadata publishing.published 2026-09-15
Metadata publishingSAP only
CAP, CDS, CDL, CSN and jq - finding associationsCAP, CDS, CDL, CSN and jq - finding associationsHow associations are actually represented once CDL is compiled into CSN, worked out by parsing the machine-readable form with jq. Useful less as a recipe than as a way in: anything that wants to reason about a CDS model without the compiler has to read CSN, and this is what that looks like from the outside.published 2024-04-16
Develop a full stack Business application with SAP Cloud Application Programming ModelDevelop a full stack Business application with SAP Cloud Application Programming ModelBuilds a full-stack CAP application in SAP Web IDE Full Stack's now-retired 'SAP Cloud Platform Business Application' template: a data-model.cds entity with its own service definition, then Fiori annotations on the generated OData. Building the project compiles that model into Catalog.xml and csn.json, the EDMX and CSN that metadata publishing says every exposed service gets. The entity and service definitions it writes by hand are the basic shape data modelling covers, though the webIDE and MTA tooling staged around them is gone.former_member584731, published 2018-11-29
How to rename an OData V4 service?How to rename an OData V4 service?Renaming an OData V4 service binding changes its Service Alias and the resulting service URL, breaking any app already deployed against the old one — shown on a /DMO/TRAVEL-based example in the SAP BTP ABAP environment by unpublishing, renaming and republishing the binding, then reading the new URL back from the OData V4 service catalog's ServiceGroups entry. It weighs that against two alternatives: adding a second service definition and publishing it as a new service version under the same binding, or creating an entirely new service definition and binding, which keeps the original URL live during the cutover.published 2026-07-04
Importing an external data model using CDS Graphical Modeler for Visual Studio CodeImporting an external data model using CDS Graphical Modeler for Visual Studio CodeWalks through the CDS Graphical Modeler for Visual Studio Code: creating a "Customers" entity, importing an external OData model from an edmx file into the CDS model, and drawing a managed association from the new entity to an entity from the imported namespace. The import happens through the modeler's GUI rather than the cds import command, and the imported edmx becomes a CDS file the modeler can open directly.Xiao-fei_Song, published 2022-05-09
Importing external edmx files to your CAP project using the CDS Graphical ModelerImporting external edmx files to your CAP project using the CDS Graphical ModelerAn EDMX downloaded from the API hub — API_BUSINESS_PARTNER in the example — imported into the CDS model and its entities exposed as projections, done through the graphical modeller rather than cds import. Barely a page long.Xiao-fei_Song, published 2021-05-19
Introducing the Cloud Application Programming Model (CAP)Introducing the Cloud Application Programming Model (CAP)SAP's own general-availability announcement for CAP, laid out as a Golden Path: a data model and service defined in CDS gets a generated service provider that serves metadata publishing and CRUD requests, fills in primary keys and audit data, and writes trace and audit logs without application code. The same CDS model carries annotations that translate to OData vocabularies and generate a Fiori elements app skeleton, which is how Fiori annotations work in CAP.Daniel7, published 2018-06-05
SAP Cloud Platform Backend service: Tutorial [12]: CDS : local: buildSAP Cloud Platform Backend service: Tutorial [12]: CDS : local: buildCompiling a CDS model locally with the cds command-line tool, installed from @sap/cds via SAP's own npm registry, before uploading it to SAP Cloud Platform Backend service: cds compile converts the model to CSN by default, --to edmx or --to edm produces the OData V2 or V4 metadata document, and --to hana or --to sql produces the database-specific definition files. It shows the local build catching an error the CDS editor's own validation misses — an entity with no key, valid CSN but invalid OData — before the same model reaches the server's compiler.CarlosRoggan, published 2019-04-15
SAP ORD Made Simple: What It Does and Why It’s Crucial in your SAP Landscape + Purpose and ValueSAP ORD Made Simple: What It Does and Why It’s Crucial in your SAP Landscape + Purpose and ValueExplains Open Resource Discovery (ORD), the metadata protocol SAP services use to self-describe their APIs, events and entity types for discovery across SAP Integration Suite, SAP Business Data Cloud and SAP Datasphere. Points to SAP's @cap-js/ord as the reference implementation that lets CAP applications publish ORD-compliant metadata, the piece metadata publishing marks as beyond the EDMX and CSN the core emits on its own. Shows how to confirm ORD support for a published API by checking its ORD ID on the SAP Business Accelerator Hub.Yogananda, published 2026-03-01
September 15th: What's New on developers.sap.comSeptember 15th: What's New on developers.sap.comThomas Jung walks through a week of changes aimed at agentic consumption of developers.sap.com itself: the hosted MCP server gains a published .well-known/mcp.json manifest, curated tools (search_tutorials, get_tutorial_step with a Markdown format option, search_channels), and a listing in the ORD catalog beside its OData, REST and GraphQL APIs. It also documents the site's existing A2A endpoint for the first time and ships a way to turn a tutorial into an installable, cryptographically signed AI Skill with a generated verification script, both concrete instances of agent tooling; separately, five broken GraphQL example queries were fixed and the full SDL is now served, and new sitemap.md, llms.txt fixes and ORD entries round out the site's own metadata publishing.published 2026-09-15
Where ORD Is Used in SAP Datasphere, SAP Business Data Cloud & SAP DatabricksWhere ORD Is Used in SAP Datasphere, SAP Business Data Cloud & SAP DatabricksOpen Resource Discovery (ORD) is the metadata standard SAP's Business Accelerator Hub attaches to APIs, and the one SAP Business Data Cloud requires of any data product — including ones Databricks publishes — before SAP Datasphere can discover it. Data products moving from Databricks into Business Data Cloud carry both ORD and CSN metadata side by side.Yogananda, published 2026-03-01
ODataSAP and community
Adding Immutable Blockchain Proofs to SAP With CAP - Cardano and OData V4Adding Immutable Blockchain Proofs to SAP With CAP - Cardano and OData V4The write-up behind ODATANO, by its author: how a public blockchain gets reachable from CAP as an ordinary OData V4 service rather than through a bespoke client. The premise it starts from is worth the read on its own — SAP systems are trusted but mutable, which is what an immutable anchor is for — and Cardano is chosen for peer-reviewed research and formal methods rather than for popularity. Written as an experiment with feedback invited, not as a recommendation.maxalexweber, published 2026-05-15
AI-assisted full stack development using model context protocol serversAI-assisted full stack development using model context protocol serversMCP servers in Visual Studio Code used to configure, query and change a full-stack application built with CAP, CDS and OData: the agent access to your code concern, a coding assistant reading and changing the project it works in. The abstract names no server, so neither @cap-js/mcp-server nor any other is attached, and it does not say which changes are made. A TechEd 2026 session (Thursday 29 October, Berlin), presented by Sergio Guerrero, written here from SAP's abstract; the recording is not yet published.
Calling bound / unbound CAP actions from Fiori elements application.Calling bound / unbound CAP actions from Fiori elements application.invokeAction from the Fiori elements Edit flow API, with the difference between bound and unbound actions spelled out first because the call shape differs. Under three thousand characters and it answers exactly one question.vidhyasagarmule, published 2024-09-07
Consume Remote Services in a Full-Stack CAP ApplicationConsume Remote Services in a Full-Stack CAP ApplicationExtending the Developer's Guide application with a remote S/4HANA service — connectivity, importing the Business Partner API, and running against it. SAP publishes this as four separate paths: mock server or real S/4HANA Cloud, times Cloud Foundry or Kyma. One entry covers all four, because the difference between them is which backend and which runtime, not what you learn.SAP
Create CDS Views and expose through OData service in CAPMCreate CDS Views and expose through OData service in CAPMViews defined in CDS and then exposed, which is the whole of what a small CAP service is. Written step by step from cds init onward in Business Application Studio.VenkateshMundru, published 2025-08-11
Extend SAP SuccessFactors on SAP BTP with CAP - Create the CAP ServiceExtend SAP SuccessFactors on SAP BTP with CAP - Create the CAP ServiceWalks through writing a service definition in SAP Business Application Studio that projects entities from an existing CDS model: one entity gets @odata.draft.enabled because Fiori Elements only shows CRUD actions on a draft-enabled entity, and a read-only projection of an already-imported SuccessFactors OData entity fails with the generic handlers because the call is delegated to the remote service, so a custom handler is needed. Running cds watch then serves the entities, drafts and $metadata at the declared service path.published 2022-03-23
Extend SAP SuccessFactors on SAP BTP with the SAP Cloud Application Programming ModelExtend SAP SuccessFactors on SAP BTP with the SAP Cloud Application Programming ModelTwelve tutorials, about two hours, building a side-by-side extension of SuccessFactors on BTP. The spine is remote services: importing the SuccessFactors OData service definitions into a CAP model, then treating them as entities the extension reads and writes through, rather than as an API called from a handler. Indexed as one entry because the parts only make sense in order.SAP
How to Perform Initial Loads from S/4HANA to Advanced Event Mesh with Odata PollHow to Perform Initial Loads from S/4HANA to Advanced Event Mesh with Odata PollWalks through building a Cloud Integration flow that polls the S/4HANA Business Partner OData API on a timer, splits the response into individual records, and publishes each as an event to Advanced Event Mesh through its adapter, with the topic set dynamically from a grouping property. Selects fields and expands associations with $select/$expand against an EDMX from the API Business Hub, and works around the OData V2 adapter's lack of JSON support by falling back to the HTTP adapter with an XML-to-JSON converter. Flags the trade-off: the pattern needs no backend change beyond activating the API, but the polled payload has to stay aligned with whatever event format the ERP pushes on change.AlexPfeil, published 2025-04-04
Resolving date serialization issues when using an external OData v2 service with CAPResolving date serialization issues when using an external OData v2 service with CAPDates coming out of an external OData v2 service in a shape CAP does not expect, and what to do about it. A narrow bug report with a fix, and the kind of thing that costs an afternoon if nobody has written it down.pieterjanssens, published 2020-07-09
SAP BTP SDK for iOS & CAP with OData V4 supportSAP BTP SDK for iOS & CAP with OData V4 supportThe iOS SDK gaining OData V4, which until then made connecting a native app to a CAP service awkward — CAP defaults to v4 and the SDK did not speak it. Short, and it marks the date that stopped being a problem.KRiedelsheimer, published 2021-04-21
SAP CAP Adapter to expose OData as custom REST ServiceSAP CAP Adapter to expose OData as custom REST ServiceWalks through consuming an external OData V2 service in a CAP project — cds import converts the Northwind service's EDMX into a CSN and cds.connect.to wires up the remote proxy — then re-exposing it as plain REST with the @protocol:'rest' annotation instead of OData's own envelope. Shows two ways to reshape the response, renaming and dropping fields in a CDS projection or rewriting the returned objects in a custom service handler, and remaps ?pageSize and ?offset onto OData's $top and $skip in that same handler.Former Member, published 2021-09-15
SAP CAP function and action with Unstructured/Dynamic Type Input/OutputSAP CAP function and action with Unstructured/Dynamic Type Input/OutputA CAP action or function can take or return an unstructured type: annotate the service @protocol: 'rest', declare the parameter or return value as @open type object {}, and a handler shapes the payload however a given request needs, shown here with a bound action and a function that returns a different structure per input. The text states plainly that OData V4 and GraphQL services require a fixed structure for action and function parameters, so the dynamic type works only over CAP's REST protocol.published 2022-12-08
SAP CAP(Cloud Application Programming)开发框架概述SAP CAP(Cloud Application Programming)开发框架概述A Chinese-language walkthrough of CAP built mainly from CAPire's own "About CAP" page: CDS entities, associations, compositions and aspects for data modelling, with an extend Books with @restrict: [{ grant:'WRITE', to:'admin' }] aspect as its authorization example; CQL and CQN queries shown against both a local service and OData's $select/$expand; and the service-and-event model — this.on, this.emit, srv.on — that carries CAP's async processing. It closes with the author's own setup: installing @sap/cds-dk, scaffolding a bookshop project with cds init, and running it with cds watch against local SQLite, mocked authentication and file-based messaging standing in for HANA Cloud, IAS and Kafka.ArthurYang, published 2024-01-07
SAP Cloud Platform Backend service: Tutorial [11]: CDS : magic: key: generationSAP Cloud Platform Backend service: Tutorial [11]: CDS : magic: key: generationExplains CDS's UUID key type: giving a key property UUID gets its value generated automatically instead of a hand-picked unused number, as data modelling lets an element's type do, at the cost of a 36-character value unfit for a user-facing display. It then works out how that generated value is addressed in a single-entity read URL — bare brackets in OData V4 against the guid'...' literal V2 requires — citing the OData specification for the difference.CarlosRoggan, published 2019-03-15
The Complete Guide to Calling Actions in UI5 with Custom CodeThe Complete Guide to Calling Actions in UI5 with Custom CodeWritten because the documentation is thin and the samples sparse, and openly as a note to the author's future self — hand-coding an action call has become a rare task for anyone mostly working in Fiori elements, which is exactly why it is hard to look up when it comes round. Comes with a CAP sample project, so the service half is there too.published 2025-07-21
UI for the BTP Application Vulnerability ReportUI for the BTP Application Vulnerability ReportAn open-source SAPUI5 front end for SAP's Application Vulnerability Report API, backed by a CAP Node.js service that projects the external findings as an OData V4 entity and forwards each query with api.run(req.query). The CAP service reaches that API through a Destination service instance configured with OAuth2ClientCredentials authentication from a service key, so the address and credentials stay out of the application code.published 2026-02-10
OpenAPIUnmapped
Edge Integration Cell : Design, deploy and manage APIsEdge Integration Cell : Design, deploy and manage APIsWalks through creating an API artifact in API Management on the customer-managed Edge Integration Cell runtime, including the option to generate the artifact by importing an OpenAPI specification rather than from a URL or by hand. It then attaches an Authentication policy and a Quota step capped at four calls per minute, deploys, and shows both the resulting 401 and the quota-breach error in the Monitor logs. The author frames it as the first of a series on Edge Integration Cell's policies.published 2023-11-15
Part 2 – Empowering SAP BTP CAP Services through Open API Spec and Annotations for Effective Communication, Collaboration and GovernancePart 2 – Empowering SAP BTP CAP Services through Open API Spec and Annotations for Effective Communication, Collaboration and GovernanceWalks through generating an OpenAPI specification for a Node.js CAP service: installing cds-swagger-ui-express, bootstrapping it in server.js, a sample CDS data model with associations and compositions, and the YUML diagram and endpoint details the Open API Preview renders in Business Application Studio. Also shows gating the Swagger UI behind a user-defined environment variable so it is served in development and QA subaccounts but excluded from the production deployment on Cloud Foundry. Second of a three-part series; the first covers the concepts and the third goes deeper into annotations.mohit_bansal3, published 2023-05-24
SAP Job Scheduling Service: 🔧 Generate Your Own Client Library from OpenAPI SpecSAP Job Scheduling Service: 🔧 Generate Your Own Client Library from OpenAPI SpecA tutorial on generating a type-safe client library for the SAP Job Scheduling service's REST API from its OpenAPI specification, using the OpenAPI Generator CLI to target Node.js, TypeScript, Java, Python, Go or C#. It walks through OAuth 2.0 client-credentials authentication and the generated client's Jobs API, listing, creating and reading jobs with their cron schedules, and lists what the service's error statuses (400, 401, 404, 409, 429, 503) mean to a caller. It states that the official @sap/jobs-client will be deprecated and tells readers to use a generated client for now.DenisDuev, published 2026-05-04
Swagger UI | SAP BTP Extension Generators | Hands-on Video TutorialsSwagger UI | SAP BTP Extension Generators | Hands-on Video TutorialsA blog post wrapped around a video playlist from the SAP HANA Academy — Swagger UI for CDS, added to the BTP extension generator series. The written half is an ingredients list and a table of contents; the substance is in the recordings.dvankempen, published 2021-07-09
Pagination and streamingSAP only
[Part – 2] Enrich CAP based Services with Behaviors using Annotations[Part – 2] Enrich CAP based Services with Behaviors using AnnotationsThe second half of a two-part walkthrough of CAP's behavioral annotations, following on from access control and input validation in the first part. This post works through @cds.autoexpose, @cds.api.ignore, @cds.persistence.exists/skip, @cds.on.insert/@cds.on.update and the @odata.Type/@odata.singleton mapping overrides, all shaping how a CDS model is projected into a service, which is data modelling. Alongside these it covers @cds.query.limit for default and maximum page sizes (pagination and streaming), @odata.etag with exclusive and shared locks for optimistic concurrency (concurrency control), and @cds.search for scoping $search to chosen elements (search), each with a CDS code example.published 2023-01-29
Serve your application over MCPSAP only
Add MCP capabilities to a CAP serviceAdd MCP capabilities to a CAP serviceA fifteen-minute walkthrough of turning a plain CAP service into an MCP server: annotate the service with @mcp, install @cap-js/mcp, and it is served alongside OData at /mcp/<path>. The part worth reading it for is what happens next — cds watch writes the endpoint into the local agent's own configuration file, so OpenCode or Claude Code can call the service without anyone editing JSON by hand. It is built on the tiny-sample facet, so there is nothing to prepare, and it shows the protocol traffic rather than only the result. Written while the adapter was in beta, and it says so.published 2026-08-13
Agentic AI on BTP: a Multi‑Agent App with Pydantic AIAgentic AI on BTP: a Multi‑Agent App with Pydantic AISplits a single CAP/TypeScript agent that had grown to juggle five BTP MCP servers behind one bloated tool list into btp-multiagent-app, a Python and Pydantic AI rewrite where the Cloud Foundry and BTP Core MCP servers each get a dedicated specialist agent, with an audit log specialist scaffolded but left disabled, behind an orchestrator whose only tools are delegation calls to those specialists, which is the agent-tooling pattern the piece works through. Each specialist authenticates to its MCP server over Streamable HTTP with OAuth 2.1, and a shared module centralises the SAP AI Core GenAI Hub model setup behind two credential layouts, one for local runs and one for the Cloud Foundry service binding, the LLM integration side of the rewrite. Tool lists per agent drop from well over a hundred to a dozen or two, and routing failures become separable from tool-misuse failures by reading the trace.published 2026-05-03
Agentic AI on BTP: a Single Agent with LangGraphAgentic AI on BTP: a Single Agent with LangGraphA CAP TypeScript agent puts a LangGraph StateGraph in front of AzureOpenAiChatClient from @sap-ai-sdk/langchain, reaching SAP AI Core's Generative AI Hub, and lets its tool-calling loop draw on five deployed MCP servers — OData MCP Proxy, CI MCP Server, AI Core MCP Server, BTP MCP Server and BTP CF MCP Server — through @langchain/mcp-adapters' MultiServerMCPClient. Because agent, servers and APIs share one XSUAA tenant, the chat service forwards the signed-in user's own JWT instead of a service account, so each downstream server enforces that user's own authorizations. Past roughly a hundred combined tools the single prompt slows down and stops separating concerns, which is why the author's next post splits it into one specialist agent per MCP server behind an orchestrator.published 2026-05-03
Agentic CAP: Build MCP servers and enterprise AI agentsAgentic CAP: Build MCP servers and enterprise AI agentsCAP applications become AI agents over the Model Context Protocol and the Agent2Agent protocol, which is the serve your application over MCP concern, and SAP AI Core is the LLM integration through which AI is embedded in a CAP app, with recommendations from the SAP-RPT-1 model as the abstract's example. The abstract names the two protocols and the one model and does not say which packages carry them. A two-hour TechEd 2026 session in a hands-on room (Tuesday 27 October, Berlin), presented by Daniel Hutzel, Daniel Schlachter, Marc Huber and Sami Lechner, written here from SAP's abstract; the recording is not yet published.
API Composition: Seamless Enterprise Data Access for Developers and AI AgentsAPI Composition: Seamless Enterprise Data Access for Developers and AI AgentsAPI Composition (formerly Graph, a capability of API Management) curates business data graphs from existing SAP and non-SAP API providers, so a query can navigate and expand relationships across systems through one composed API rather than hand-written integration code. Palak walks through combining SAP S/4HANA warehouse-stock data with Everstream Analytics risk data into one API, then exposing that composed API as an MCP server so an AI agent calls it with the same semantic context — the scenario behind API Management's MCP servers coverage.published 2026-07-27
BTP Audit Log MCP Server: Security Monitoring with AI AssistantsBTP Audit Log MCP Server: Security Monitoring with AI AssistantsWouter Lemaire builds an MCP server over SAP BTP's Audit Log Retrieval API using odata-mcp-proxy, with a single entity set and zero custom code, so an AI assistant can answer natural-language questions like "Were there any configuration changes yesterday?" by calling AuditLogRecords_list against a BTP destination authenticated with the Audit Log service's service key. It covers the destination setup, the entity-set configuration that maps the PascalCase entity name to a lowercase auditlogrecords path, and handling the API's 500-record pagination limit.published 2026-03-13
CAP in the age of AICAP in the age of AISeven live episodes of Hands-on SAP Dev in which DJ Adams works through CAP's AI features with the people who build them, each one a screen-share against a sample project. The first three are @cap-js/mcp: the @mcp annotation on a service, the describe, query and call tools, CQL as the query format, and what authorisation takes out of the tool list. From episode three the run moves to A2A and @cap-js/agents — human approval of an action, agents.md and skills, session persistence, telemetry and sub-agents — and the last two episodes are vector embeddings in CDS, local on SQLite and native on SAP HANA Cloud.published 2026-08-07
CAP in the age of AI #1 - the MCP adapterCAP in the age of AI #1 - the MCP adapterThe episode that opens the series and the first pass over @cap-js/mcp, with four of the people building it on the call. Two of the adapter's tools are worked through: describe, the one an MCP client reaches for first to get the overview of what it may do, and query, which the panel establishes as read-only. It also writes the server entry into a local agent's own configuration file, which episode three comes back to as auto-wiring.published 2026-08-07
CAP in the age of AI #2 - more on the MCP adapterCAP in the age of AI #2 - more on the MCP adapterWhat the query tool costs in tokens, and the third tool @cap-js/mcp registers. Counted against a model running locally under llama.cpp, the same query is 26 tokens as CQL and 173 as CQN, and the tool definition sent with every system prompt drops from around 5,500 tokens to around 600 — the reason CQL became the default format. The call tool then exposes a service's unbound actions and functions, as one generic tool or, behind a flag, one tool per action with its own description and input schema; a question from the chat about extension points gets the answer that the adapter does the tools, which the panel calls a small subset of the protocol.published 2026-08-14
CAP in the age of AI #3 - from MCP to A2ACAP in the age of AI #3 - from MCP to A2AThe episode that finishes @cap-js/mcp with authorisation and then crosses to agents. @requires and @restrict are the same annotations CAP already has, and the plugin reads them to filter the tool list and the describe output per user and per request, so a model is not told about entities the caller cannot reach — where the OData metadata of the same service lists every exposed entity regardless. The second half annotates a service with @agent from @cap-js/agents, which serves it over A2A with an agent card and a chat preview, runs first against a mocked response and then against SAP AI Core bound with cds bind and a hybrid profile, and reuses the MCP adapter's tools rather than defining new ones.published 2026-08-21
CAP in the age of AI #7 - vector embeddings wrap-upCAP in the age of AI #7 - vector embeddings wrap-upThe same embeddings model taken from SQLite to SAP HANA Cloud, then handed to an agent. Locally it is @cap-js/ai that adds the vector functions SQLite lacks and downloads an all-MiniLM L6v2 ONNX model on first start; on HANA natural language processing has to be switched on, the model name is a mandatory argument, the vectors it returns are 768 dimensions, and dimensions must match on both sides of a comparison. HANA itself can be given SAP AI Core as a remote source for other embedding models, which a CDS.ql expression has to inject because the postfix notation only takes what the CDS model holds, and the hour ends with a search function over cosine similarity exposed over @cap-js/mcp, so an agent asked about low output from solar panels calls semantic search instead of writing the query itself.published 2026-10-16
CAP Node.js Expert Session #6 - The MCP AdapterCAP Node.js Expert Session #6 - The MCP AdapterDaniel Schlachter and DJ Adams add @cap-js/mcp to a bookshop service, inspect its describe, query and action tools, and query the catalogue through an AI agent. The session distinguishes this runtime adapter from the development-time MCP server and demonstrates automatic registration of the running service with a local agent. The recording describes the adapter as beta in July 2026, with read-only queries and writes through unbound actions.
CAP: The Road Ahead - Simplicity in an AI EraCAP: The Road Ahead - Simplicity in an AI EraDevtoberfest 2026 session CAP10, from the head of SAP's Cloud Application Programming Model: forty minutes of live building rather than slides, on the argument that the cheapest code in an AI project is code nobody has to generate. Claude Code builds an invoice-matching workspace from cds init onwards, and each step is one the framework answers rather than the agent: a 42-line domain model that @sap/cds serves as OData and Fiori elements with a status flow, data privacy and change-tracking annotations that produce audit log entries in the console and would reach the SAP Audit Log service once deployed, an imported S/4HANA supplier data product, and semantic matching from a local embedding model after @cap-js/ai is added. The last three steps are annotations: @mcp beside @odata turns the service into an MCP server that a second Claude session queries through @cap-js/mcp, an agent annotation adds the A2A protocol with an agent card and an audit log entry for the agent task, and a skill file gives the agent the matching policy.SAP Developers, published 2026-09-25
Examine the details of the Model Context Protocol on startupExamine the details of the Model Context Protocol on startupWhat the MCP adapter actually does when a CAP server boots, watched rather than described — the companion to the tutorial that switches it on.
Expose S/4HANA Cloud OData API as an MCP Server via CAP Node.jsExpose S/4HANA Cloud OData API as an MCP Server via CAP Node.jsA step-by-step walkthrough that wraps SAP S/4HANA Cloud's Outbound Delivery OData v2 API in a CAP Node.js service and exposes it through @cap-js/mcp, so an MCP client can list the generated tools, query the delivery entities and call a custom createDelivery action over JSON-RPC. The remote S/4HANA connection is configured two ways in package.json: direct Basic Authentication credentials for local hybrid testing, and a named BTP destination for the app once deployed to Cloud Foundry.Jacky_Liu1, published 2026-07-29
Expose S/4HANA Cloud OData API as an MCP Server via CAP Node.jsExpose S/4HANA Cloud OData API as an MCP Server via CAP Node.jsA CAP Node.js service imports the S/4HANA Cloud Outbound Delivery OData v2 API's EDMX metadata with cds import, proxies its reads and a custom createDelivery action against it, and annotates the service @protocol: ['odata-v4', 'mcp'] with @cap-js/mcp's per_action_tool setting on, so the custom action gets its own MCP tool rather than one generic call_action. It tests the result with raw JSON-RPC tools/list and tools/call requests before deploying to SAP BTP, Cloud Foundry Runtime.Jacky Liu, published 2026-07-29
From Dashboard to Conversational AI in Minutes: Adding MCP to an Existing CAP ApplicationFrom Dashboard to Conversational AI in Minutes: Adding MCP to an Existing CAP ApplicationA walkthrough of adding @cap-js/mcp to an existing CAP service behind the SuccessFactors Localization Dashboard: two annotations (@odata, @mcp) expose the service over MCP beside its existing OData endpoint, and doc comments added to the 18 entities and their fields are surfaced through the describe tool so a querying model gets business context instead of bare field names. During local development cds watch auto-registers the endpoint in ~/.claude.json, and the author connects the same endpoint to Joule Work Desktop as an MCP connector so users can ask coverage questions in natural language.i533678, published 2026-08-24
From SAP Sales and Service Cloud V2 APIs to AI: Building an MCP Server with CAP Node.jsFrom SAP Sales and Service Cloud V2 APIs to AI: Building an MCP Server with CAP Node.jsA step-by-step CAP Node.js walkthrough that wraps the SAP Sales Cloud V2 Case API as a remote service, then exposes the resulting service over both OData V4 and MCP through a single @protocol: ['odata-v4', 'mcp'] annotation together with @cap-js/mcp's per_action_tool setting. Each CDS action — listCases, getCaseById, createCase, patchCase — becomes its own MCP tool served at /mcp/caseservices, discoverable through tools/list and invoked from a natural-language request.pvsbprasad, published 2026-08-31
MCP Servers are the New Z-TablesMCP Servers are the New Z-TablesA single CAP service exposed as three overlapping MCP servers tools, queried by the same prompt nineteen times, returned the same tool every time — evidence, the author argues, that tool selection rests on the resemblance between a prompt and a tool's description rather than on any binding a where-used list could enumerate before retiring it. It contrasts that setup with @cap-js/mcp, which exposes a whole service as three generic tools instead of one per operation, and quotes the adapter's own beta documentation admitting no rate limiting, audit logging, input validation or approval workflow, and no use as a gateway to SAP Application APIs. From there it names four small Tool governance practices it has adopted: an owner recorded in the tool's own metadata, logging every invocation, deprecating inside the description, and exposing fewer tools.published 2026-08-21
Model Context Protocol Adapter — CAP guideModel Context Protocol Adapter — CAP guideDocuments @cap-js/mcp and com.sap.cds:cds-adapter-mcp, service annotations, generated describe/query/call tools and local client setup. The guide records Java doc-comment configuration, unbound-action-based data changes, incomplete XSUAA PKCE support and the adapter’s governance boundaries.
Natural Language Queries for SAP CAP via MCP: The LLM Translates, CDS ExecutesNatural Language Queries for SAP CAP via MCP: The LLM Translates, CDS ExecutesThe division of labour is the argument, and it is in the subtitle: the model turns English into a CDS query and CDS runs it, so nothing generates SQL and nothing hallucinates a join. Schema annotations do the resolving. Long, with the package, the repository and the MCP registry entry all linked.Shahid, published 2026-06-25
SAP Meets the Agentic Web: CAP MCP - UI5 WebMCPSAP Meets the Agentic Web: CAP MCP - UI5 WebMCPA Devtoberfest 2026 session (CAP-42) that puts MCP and WebMCP side by side: MCP exposes a backend to an agent, WebMCP exposes the tools of a web page to whatever agent arrives at it, and only Chrome behind a flag and Cloudflare's Kite browser support the second one today. The CAP half starts with two agents scraping a Fiori elements app with Playwright and browser dev tools, then annotates the catalogue service with the MCP protocol through @cap-js/mcp, after which the agent calls the generated describe tool instead of parsing pages. The UI5 half registers a search-authors tool on the browser's model context API inside the same app, with the cross-origin isolation header the API requires, and lists it through the WebMCP Chrome extension — the agent run against it ends on an exhausted Gemini key rather than a result.published 2026-10-16
The Easiest Way to Expose a CAP Node.js Project as an MCP ServerThe Easiest Way to Expose a CAP Node.js Project as an MCP ServerFrom cds init to a running MCP server in a handful of steps, ending at the MCP Inspector so the result is something you can see rather than something you have to trust. The claim it makes for the plugin is the absence of work: no REST wiring by hand, the CAP application exposed as a server because the package is installed. A walkthrough rather than an argument — the reasoning about what should be exposed lives elsewhere.Jacky Liu, published 2026-07-03
Third-Party MCP Server Access to SAP Solutions on BTPThird-Party MCP Server Access to SAP Solutions on BTPDescribes external MCP servers and custom servers on BTP, assigning their operators responsibility for authentication, scoped identity, API limits, logging and lifecycle. The permitted use remains conditional on the SAP API Policy, while SAP Integration Suite and Joule Studio are described as SAP-provided paths. Hosting a server on BTP does not automatically supply its governance controls.Dhawal Joshi, Harut Ter-Minasyan, Mirko Günther
UI5 MCP Server Got Extended for UI Integration Cards GenerationUI5 MCP Server Got Extended for UI Integration Cards GenerationVersion 0.2.1 of the UI5 MCP Server adds three tools for UI Integration Cards: get_integration_cards_guidelines feeds an agent current best practices and API versions, create_integration_card scaffolds a new card project, and run_manifest_validation checks the generated manifest against the schema. The post frames these as closing the same gaps as the server's existing tools — an LLM's outdated or wrong card API knowledge — this time for scaffolding and validating a card rather than a full app.daniel_vladinov, published 2026-01-22
What's in Daniel Hutzel's brain?What's in Daniel Hutzel's brain?A Devtoberfest 2026 session in the building-apps track, in which Daniel Hutzel and DJ Adams work through what the CAP team is building for agents. A bookshop gets an MCP endpoint beside its OData one from a single annotation, with the plugin writing the coding agent's configuration itself; in the xt-travels sample five services that know nothing about each other are served over MCP and an agent does the orchestration the hand-built UI and its value helps used to do. Hutzel then annotates a service as an agent so the ReAct loop and the choice of model move into the CAP service, and finally drops MCP for a skill that teaches the agent CQL instead, which is where the edges to Serve your application over MCP, Agent tooling and Agent guidance come from. The mechanism under all of it, a plugin file in the package root and event handlers that can be added to any CAP service, is the edge to Plugin authoring.published 2026-10-02
WebSocketUnmapped
A Practical Real-Time CTI Widget for SAP Sales Cloud V2A Practical Real-Time CTI Widget for SAP Sales Cloud V2A small CAP backend, a WebSocket channel and a UI5 widget in an iframe — enough to get telephony events into Sales Cloud without any custom backend inside the CRM. The smallness is the design.gizemsoylutr, published 2025-11-28
CAP WebSocketsCAP WebSocketsThe early one, from 2021, before an adapter existed to make it ordinary. Read for what the problem looked like when it had to be solved by hand.vvdries, published 2021-01-26
Communicate from a Java Application to ABAP via WebSocket RFC using JCo - Migration GuideCommunicate from a Java Application to ABAP via WebSocket RFC using JCo - Migration GuideWalks a JCo setup from classic CPIC-based RFC to WebSocket RFC: swap the application- or message-server logon properties for jco.client.wshost and jco.client.wsport, and implement DestinationDataProvider's getSSLContext (and, for mTLS, getClientCertificate) since the new connection runs over TLS. It covers building the PKI trust on both sides — a local PKCS12 keystore for the Java side, STRUST's SSL-Server Standard certificate exported and imported for mutual trust on the ABAP side — and notes that on BTP, JCo paired with the Destination service already implements this via the Connectivity service, so the custom SSLContext work can be skipped there.simon_luser, published 2025-01-21
From Inbox to Quotation: An AI-Assisted Sales Workbench in React on SAP CAPFrom Inbox to Quotation: An AI-Assisted Sales Workbench in React on SAP CAPA Devtoberfest 2026 session walking live through a sales workbench that turns an incoming customer e-mail into a quotation in S/4HANA, built as a React UI on CAP. It shows the filterable request inbox, the extracted configuration properties with a confidence indicator per characteristic, the variant configurator rendered in React from a JSON schema the configuration service returns, and the link from a derived value back to the place in the e-mail it was read from; the stated reason for the stack is that CAP keeps authentication, destinations and deployment the same in every project, which is where frontend boundary holds. The inbox grows while a user works because a CAP WebSocket plugin pushes new requests into the list — WebSocket.SAP Developers, published 2026-10-09
Reading Between the Lines: Under-Documented Fiori Elements Capabilities in SAPUI5 1.149Reading Between the Lines: Under-Documented Fiori Elements Capabilities in SAPUI5 1.149Reads SAPUI5 1.149's framework source, not its release notes, to show Fiori Elements shifting side-effect refresh, AI field placeholders and multi-user drafting from controller extensions into what the backing service annotates. Event-driven SideEffects push over a WebSocket channel through @cap-js-community/websocket, while Draft handling gains ABAP RAP's live field locking on CAP Node.js through Sören Leibach's own cap-collaborative-draft plugin. Both rest on Fiori annotations such as Common.SideEffects and CollaborativeDraft.enabled, which the frontend reads rather than requiring a manifest flag.published 2026-07-09
SAP Event Mesh: S4 HANA On-Prem and SAP CI(BTP IS) through WebSocket and WebhooksSAP Event Mesh: S4 HANA On-Prem and SAP CI(BTP IS) through WebSocket and WebhooksA step-by-step walkthrough of wiring Event Mesh to publish and consume events between an on-premise S/4HANA system and Cloud Integration, contrasting persistent queues (one subscriber, kept until consumed) against unpersisted topics, and WebSocket's AMQP transport against webhook delivery for the same queue. Two tested findings support it: a queue consumer running in continuous consumption mode receives a message ahead of a webhook on the same topic, and a message stays queued and is retried (almost 8770 times in under a minute, in the author's test) until the consumer processes it successfully.FarooqAhmed, published 2023-10-03
CI/CD pipelinesSAP only
DevOps with SAP BTPDevOps with SAP BTPHow SAP frames a delivery pipeline for applications on BTP Cloud Foundry: continuous integration through the SAP Continuous Integration and Delivery service and its pipeline templates for CAP and Fiori, transport and change management across environments, and a section on reasonable alternatives for teams with existing CI infrastructure. Culture first, tools second, and explicit that the setup differs on other BTP environments.published 2025-06-06
Get Started with an SAP Cloud Application Programming Model Project in SAP Continuous Integration and DeliveryGet Started with an SAP Cloud Application Programming Model Project in SAP Continuous Integration and DeliveryWiring a CAP project into SAP's hosted CI/CD service, which is the pipeline you get without assembling one.SAP
DebuggingSAP and community
debug a CAP app with UI5 TypeScript UI component with VS Codedebug a CAP app with UI5 TypeScript UI component with VS CodeDebugging both runtimes at once — the CAP server and a UI5 component written in TypeScript, the latter stepped through in its own sources rather than in the transpiled output. Written when TypeScript for UI5 had just become possible, and the combination it sets up is the one CAP's app folder invites.published 2021-11-16
Get an introduction to the cds REPLGet an introduction to the cds REPLcds repl as a way to ask the running model questions directly, which is the fastest route from a suspicion about a query to knowing.SAP
Surviving and Thriving with the SAP Cloud Application Programming Model: Local development hurdlesSurviving and Thriving with the SAP Cloud Application Programming Model: Local development hurdlesThree hurdles in running a CAP application locally: services mocked with cds run --with-mocks return no data across OData associations until the ON clause is hand-written into the imported CDS, an on-premise API reached through the SAP Cloud Connector times out because its proxy is part of destinations and connectivity and reachable only from inside SAP BTP, and a Fiori frontend served from the HTML5 Application Repository needs the HTML5 Repo Mock to reach a local backend at all. It closes with the launch configurations the author uses for debugging cds watch locally and attaching to a running Cloud Foundry instance.maxstreifeneder, published 2023-02-02
Editor supportSAP and community
Add useful Extensions to Dev spaces in SAP Business Application StudioAdd useful Extensions to Dev spaces in SAP Business Application StudioStarts from the point capire makes — that CAP is editor-agnostic and BAS is the preconfigured option — and then does the thing that undoes preconfiguration: adds two extensions to a dev space for initialising data in a CAP application, with the uninstall procedure as well as the install. The uninstall half is what makes it worth keeping.showkath_naseem, published 2022-11-13
An introduction to CDS Graphical Modeler for SAP Business Application StudioAn introduction to CDS Graphical Modeler for SAP Business Application StudioThe announcement of the graphical modeller, from the team that built it — what it draws, how to get a dev space that has it, and what it is for. The starting point for the two posts that follow it, and the record of when this became part of the editor rather than an idea.Xiao-fei_Song, published 2021-04-23
Creating new services using the CDS Graphical Modeler for SAP Business Application StudioCreating new services using the CDS Graphical Modeler for SAP Business Application StudioThe worked half of the introduction, published the same day: a service defined by drawing rather than by typing, projections included. Assumes the setup from the introduction and does not repeat it, so the two are one piece split in two.Xiao-fei_Song, published 2021-04-23
Creating structured types, enums and named aspects using the CDS Graphical ModelerCreating structured types, enums and named aspects using the CDS Graphical ModelerThe modelling constructs that are awkward to draw — structured types, enums, named aspects — done in the graphical modeller rather than in CDL.Xiao-fei_Song, published 2021-05-26
Develop CAP Project with Lazyvim in DockerDevelop CAP Project with Lazyvim in DockerA Docker image running Lazyvim with language server support for CDS, TypeScript and JSON, so a CAP project can be developed with an editing experience comparable to VS Code without leaving the keyboard. Narrow by intent, and the useful general point underneath it is that CAP's editor support reaches anything that speaks LSP.published 2024-03-28
Developing CAP applications in SAP Business Application StudioDeveloping CAP applications in SAP Business Application StudioThe overview written at the point BAS replaced Web IDE, and it is structured as a comparison — each step of building a CAP application, with the difference from the Web IDE experience called out beside it. Useful now mostly for what it records: which parts of CAP development the editor took over, and when.liat_b, published 2020-07-06
Extending SAP Autonomous SuiteExtending SAP Autonomous SuiteExtensibility across SAP Autonomous Suite: AI-enabled development in SAP Build solutions, the ABAP Cloud model among them, as the way extensions are designed, generated and deployed, and a direction for making extensions ready for agentic AI. The abstract names the suite, SAP Build and the ABAP Cloud model and no single feature, so the edges are to Extensibility, the concern, and to SAP Build Code, the SAP Build solution held here in which Joule generates and deploys development; which other SAP Build solutions the session shows is not stated. A TechEd 2026 session (Tuesday 27 October, Berlin), presented by Alexander Rother and Khaled MUSILHY, written here from SAP's abstract; the recording is not yet published.
Get familiar with your first CAPM project using CDS graphic modelerGet familiar with your first CAPM project using CDS graphic modelerThe modeller as an entry point rather than an aid — a first CAPM project built by drawing it, for the developer who has not yet internalised CDL, annotations and metadata.Jyoti_ranjan, published 2025-07-05
Importing @sap/cds common.cds to your CAP project using the CDS Graphical ModelerImporting @sap/cds common.cds to your CAP project using the CDS Graphical ModelerPulling the common aspects and code lists from @sap/cds into a model through the modeller, so the reuse types appear in the diagram rather than only in the file.Xiao-fei_Song, published 2021-05-06
Importing an external data model using CDS Graphical Modeler for Visual Studio CodeImporting an external data model using CDS Graphical Modeler for Visual Studio CodeWalks through the CDS Graphical Modeler for Visual Studio Code: creating a "Customers" entity, importing an external OData model from an edmx file into the CDS model, and drawing a managed association from the new entity to an entity from the imported namespace. The import happens through the modeler's GUI rather than the cds import command, and the imported edmx becomes a CDS file the modeler can open directly.Xiao-fei_Song, published 2022-05-09
Importing external edmx files to your CAP project using the CDS Graphical ModelerImporting external edmx files to your CAP project using the CDS Graphical ModelerAn EDMX downloaded from the API hub — API_BUSINESS_PARTNER in the example — imported into the CDS model and its entities exposed as projections, done through the graphical modeller rather than cds import. Barely a page long.Xiao-fei_Song, published 2021-05-19
Making CAP Application Development Easier and Faster with the Help of Storyboard in SAP Business Application StudioMaking CAP Application Development Easier and Faster with the Help of Storyboard in SAP Business Application StudioThe Storyboard from the other side — someone who came across it while learning the high-productivity tools, rather than someone who shipped it. It follows the whole arc a CAP project takes through the tool: entities, relationships, services, sample data, a UI, roles, and external resources, each as a thing the diagram can add rather than a file you open.Aryan_Raj_Sinha, published 2023-09-20
Now AI Helps You Developing SAPUI5 ApplicationsNow AI Helps You Developing SAPUI5 ApplicationsA walkthrough of Joule's generative AI chat panel for freestyle SAPUI5 development inside SAP Build Code: typed requests in the panel add a view with routing, a model with sample data and a table, or make hardcoded texts translatable, and an "Accept" button transfers the generated code straight into the project's files, with a "Copy" fallback for editing it by hand first. It recommends asking for whole increments rather than one control at a time, notes that Joule keeps the running conversation as context until "Reset Conversation" is pressed, and flags that generated control namespaces are sometimes wrong. A related Joule feature from the Fiori tools team instead creates a complete SAP Fiori elements list report application with its CAP project from business requirements, to continue from with this one.AndreasKunz, published 2024-03-27
Running CAP Node Applications in SAP Business Application StudioRunning CAP Node Applications in SAP Business Application StudioThe Run Configurations tool, which is where binding and mocking live in BAS rather than in a terminal. Three things it does: several named configurations per application in a tree, dependencies bound to real service instances, and OData dependencies mocked. The author notes the configurations are standard launch entries underneath, which is the detail that lets you leave the tool behind if you want to.liat_b, published 2020-10-22
SAP Cloud Application Programming Model（CAP）：概要およびデモ - Part 1SAP Cloud Application Programming Model（CAP）：概要およびデモ - Part 1Introduces SAP Cloud Application Programming Model as an open, opinionated framework that shoulders OData plumbing and database-specific code so a domain is modelled once in CDS, then builds a small bookshop project to show it: @sap/cds-dk's cds init scaffolds the project, cds watch serves it locally with live reload against an in-memory SQLite database, and a CatalogService projects a CDS domain model seeded from CSV files. The result is read as an OData service in the browser and exercised further through a Postman collection, with the optional @sap/vscode-cds extension noted for CDS syntax highlighting and completion in VS Code.rasai, published 2020-12-31
Storyboard for cloud business applications using CAP in SAP Business Application StudioStoryboard for cloud business applications using CAP in SAP Business Application StudioThe first release of the Storyboard, written by the team shipping it. Where the graphical modeller draws the data model, this draws the application: its logical components and the connections between them, alongside an application explorer enhanced in the same release. Short, and it reads as an announcement — the fuller account of using it is Aryan_Raj_Sinha's post two years later.liat_b, published 2021-02-15
Streamlining CAP Development with CDS Graphical Modeler in SAP Business Application StudioStreamlining CAP Development with CDS Graphical Modeler in SAP Business Application StudioThe case for the graphical modeller stated as a scale problem rather than a preference: a model held only as code gets hard to keep in your head once it is large, and the diagram is a second view of the same file. The most recent write-up of the tool here, and the one that treats it as an everyday working aid rather than as a new feature.Jyoti_ranjan, published 2025-07-16
Tips and Tricks for Working with Annotations in CAP Projects using Language Server Protocol (LSP) capabilitiesTips and Tricks for Working with Annotations in CAP Projects using Language Server Protocol (LSP) capabilitiesFour settings, from somebody who works on the annotation language server. The premise is the interesting part: CAP's annotation syntax is looser than ABAP CDS or EDMX — a record can be written with or without an explicit type — so the completion has to guess how verbose you want it, and this is where you tell it. Then filtering the completion list, reading the icons, ordering diagnostics by severity, and turning i18n problems on only when you want them.maryana_naboka, published 2021-10-25
GeneratorsSAP and community
CAP Initializr: Generate SAP CAP Projects in SecondsCAP Initializr: Generate SAP CAP Projects in SecondsA hosted project generator for CAP in the shape of Spring Initializr — pick the structure, dependencies and configuration in a browser and download the result, rather than running cds init and then wiring the facets by hand. The post is an MVP announcement asking for feedback, and the tool lives at a Cloud Foundry trial URL rather than on npm, so it is a direction being tested in public rather than something to depend on.Saptarshi017, published 2026-03-23
First Java Cap ApplicationFirst Java Cap ApplicationA step-by-step walkthrough of a first CAP Java project: com.sap.cds:cds-services-archetype scaffolds the initial Maven project, and the domain model is then rewritten in the db folder with entities, the cuid and managed aspects, associations, compositions and a CodeList, so a hand-coded event handler serving a single entity gives way to a service that CAP's generic persistence handling serves without custom code. It deploys that model to SQLite for local development — cds deploy --to sqlite, then a Spring profile pointing at the generated database file — and ends by adding an index.cds so the model and service can be published as a reusable npm module.bruce_wang3, published 2020-12-08
Give Your AI Agent Some Tools: Introducing the UI5 MCP ServerGive Your AI Agent Some Tools: Introducing the UI5 MCP ServerAnnounces @ui5/mcp-server, SAP's open-source MCP server for UI5 development, and walks through its initial six tools. get_project_info, get_api_reference and run_ui5_linter (which applies UI5 linter fixes) read the project's own version, manifest and code rather than an LLM's training data, which is what agent access to your code explains. create_ui5_app scaffolds a new JavaScript or TypeScript project, standalone or inside an existing CAP application, from templates with pre-configured OData model setups, which is generators.published 2025-09-03
Joule Studioがリリースされたので早速CAPアプリを自然言語で操作するカスタムスキルを構築してみたJoule Studioがリリースされたので早速CAPアプリを自然言語で操作するカスタムスキルを構築してみたA walkthrough of building a custom Joule Studio skill on a CAP bookshop app: cds add sample and cds add mta scaffold the project and its deployment descriptor, cds compile srv/ --to xsuaa generates the role template behind the @requires: 'admin' check on AdminService from the SAP Authorization and Trust Management service (XSUAA), and mbt build packages the app for deployment to the SAP BTP, Cloud Foundry Runtime. The skill reaches the deployed OData API through the SAP Destination service, configured with the OAuth2 Client Credentials grant using the client ID, secret and token endpoint from the app's XSUAA service key, so Joule answers a natural-language question about a book by its ID.takayuki_tanaka, published 2025-07-30
Now AI Helps You Developing SAPUI5 ApplicationsNow AI Helps You Developing SAPUI5 ApplicationsA walkthrough of Joule's generative AI chat panel for freestyle SAPUI5 development inside SAP Build Code: typed requests in the panel add a view with routing, a model with sample data and a table, or make hardcoded texts translatable, and an "Accept" button transfers the generated code straight into the project's files, with a "Copy" fallback for editing it by hand first. It recommends asking for whole increments rather than one control at a time, notes that Joule keeps the running conversation as context until "Reset Conversation" is pressed, and flags that generated control namespaces are sometimes wrong. A related Joule feature from the Fiori tools team instead creates a complete SAP Fiori elements list report application with its CAP project from business requirements, to continue from with this one.AndreasKunz, published 2024-03-27
Prompt-Driven Development: Building Full-Stack SAP CAP Apps from User StoriesPrompt-Driven Development: Building Full-Stack SAP CAP Apps from User StoriesA user story in, a scaffolded full-stack CAP application out, through SAP Build Code and Joule. The question it is actually asking is how much of the foundational code is worth generating, and it answers by generating all of it.AnuradhaDhingan, published 2025-12-11
SAP Cloud Application Programming Model（CAP）：概要およびデモ - Part 1SAP Cloud Application Programming Model（CAP）：概要およびデモ - Part 1Introduces SAP Cloud Application Programming Model as an open, opinionated framework that shoulders OData plumbing and database-specific code so a domain is modelled once in CDS, then builds a small bookshop project to show it: @sap/cds-dk's cds init scaffolds the project, cds watch serves it locally with live reload against an in-memory SQLite database, and a CatalogService projects a CDS domain model seeded from CSV files. The result is read as an OData service in the browser and exercised further through a Postman collection, with the optional @sap/vscode-cds extension noted for CDS syntax highlighting and completion in VS Code.rasai, published 2020-12-31
SAP Fiori Application Generator Available in Open SourceSAP Fiori Application Generator Available in Open SourceThe SAP Fiori tools team announces that the code behind @sap/generator-fiori has moved entirely to open source, and names the packages it is built from: writers that output SAP Fiori elements and freestyle SAPUI5 application files, inquirer prompts for picking a back end, and ABAP deploy tasks, coordinated by a sub-generator. Before publishing, the team broke up what had been a monolith, added TypeScript typings and raised test coverage.jlong, published 2025-05-27
UI5 MCP Server Got Extended for UI Integration Cards GenerationUI5 MCP Server Got Extended for UI Integration Cards GenerationVersion 0.2.1 of the UI5 MCP Server adds three tools for UI Integration Cards: get_integration_cards_guidelines feeds an agent current best practices and API versions, create_integration_card scaffolds a new card project, and run_manifest_validation checks the generated manifest against the schema. The post frames these as closing the same gaps as the server's existing tools — an LLM's outdated or wrong card API knowledge — this time for scaffolding and validating a card rather than a full app.daniel_vladinov, published 2026-01-22
Useful CAP CDS and Fiori Commands to Accelerate Development and DeploymentUseful CAP CDS and Fiori Commands to Accelerate Development and DeploymentA command-by-command walkthrough of @sap/cds-dk's cds add and fiori add generators: cds add xsuaa writes an XSUAA security configuration from the CDS model's authorization annotations, and cds add hana together with cds deploy --to hana switches persistence from the default SQLite database to SAP HANA Cloud. cds add mta and fiori add deploy-config, from @sap/generator-fiori, build the Cloud Foundry deployment descriptor together, adding a destination-service block and an xs-app.json that routes the Fiori app's calls through a named destination.TiaXu, published 2022-10-19
LintingCommunity only
Introducing eslint-plugin-better-cap-config an ESLint plugin to improve CAP configurationIntroducing eslint-plugin-better-cap-config an ESLint plugin to improve CAP configurationThe author's own announcement, and precise about scope: today it catches deprecated key/value entries in CAP's JSON configuration, and the ambition is that it grows into best practices, suggestions and autofixes the way any ESLint plugin does. The implementation detail worth knowing is that it uses modern ESLint's JSON language support rather than a generic parser, which is what makes linting a configuration file rather than source code work at all.published 2025-09-08
Local developmentSAP only
A Fiori Launchpad Sandbox for all your CAP-based projects - OverviewA Fiori Launchpad Sandbox for all your CAP-based projects - OverviewWhere cds-launchpad-plugin came from, told as a learning exercise: the author wanted a real problem to teach himself TypeScript on, and picked the thing he kept redoing in every CAP project — a launchpad to see all the UI applications in one place. The origin post for an entry whose 2023 update is also indexed here.published 2022-03-14
A Fiori Launchpad Sandbox for all your CAP-based projects – Sample project setupA Fiori Launchpad Sandbox for all your CAP-based projects – Sample project setupThe hands-on half published the same day as the overview: the launchpad module wired into the CAP sample repository, step by step from a global cds-dk install. Same-day pairs like this are worth keeping together — the overview argues, this one is the thing you follow.published 2022-03-14
BTP CAP : How to Connect to Remote Services Locally in CAP ApplicationBTP CAP : How to Connect to Remote Services Locally in CAP ApplicationThe same problem four years earlier: a CAP application that consumes a remote service, running locally against the real thing rather than against a mock.showkath_naseem, published 2022-12-12
CAP for nodejs安全的暴露接口练习CAP for nodejs安全的暴露接口练习Starting from the risk-management sample, the walkthrough adds an open ExternalAPI service beside the existing RiskService, then moves every security annotation into a separate service-auth.cds file: @requires: authenticated-user on one entity, role-scoped @restrict grants for RiskViewer and RiskManager on another. It tests the unprotected action locally with cds watch, calling it from Postman with the session cookie read out of SAP Business Application Studio's preview tab. It then deploys to BTP and reads Risks with a client-credentials OAuth token fetched from a service key of the cpapp-auth instance, after changing that entity's READ grant from RiskViewer to authenticated-user, which the post, citing capire's CDS-based Authorization page, describes as a grant for a technical user integrating systems rather than for access from a front end.ArthurYang, published 2024-12-10
CAP with Local App Previews – Tips for Smooth DevelopmentCAP with Local App Previews – Tips for Smooth DevelopmentUI5's virtual endpoints remove the sandbox files a local preview used to need, and this is what that means for a CAP project specifically. Tips from trying it rather than an announcement of it.MioYasutake, published 2025-08-16
cds-launchpad-plugin supercharged & ready for the future - CAP Plugin, UI5 Tooling support & Async Launchpadcds-launchpad-plugin supercharged & ready for the future - CAP Plugin, UI5 Tooling support & Async LaunchpadThe maintainer on a set of changes rather than on the plugin's original purpose, which is indexing every SAPUI5 project in a workspace into one sandbox launchpad so all of them can be tested together. What moved: it became a CAP plugin, gained UI5 Tooling support, and moved to the async launchpad — each framed as keeping pace with where SAPUI5 itself is going rather than as a feature.published 2023-12-11
Create a Simple CAP Application and Explore the DefaultsCreate a Simple CAP Application and Explore the DefaultsThe shortest way in: a project from the wizard, then a look at what CAP assumed on your behalf. The defaults are the subject rather than the application — which is the right first lesson in a framework whose whole argument is convention over configuration.SAP
Develop CAP Project with Lazyvim in DockerDevelop CAP Project with Lazyvim in DockerA Docker image running Lazyvim with language server support for CDS, TypeScript and JSON, so a CAP project can be developed with an editing experience comparable to VS Code without leaving the keyboard. Narrow by intent, and the useful general point underneath it is that CAP's editor support reaches anything that speaks LSP.published 2024-03-28
Establishing connectivity between a local CAP runtime and on-premise systemsEstablishing connectivity between a local CAP runtime and on-premise systemsReaching S/4HANA, an on-premise HANA or any HTTP service from a CAP process running on your laptop — the case where the connectivity proxy the platform provides is not there and the tunnel has to be arranged.vLeonkev, published 2025-10-15
Get an introduction to the cds REPLGet an introduction to the cds REPLcds repl as a way to ask the running model questions directly, which is the fastest route from a suspicion about a query to knowing.SAP
How to Call a Remote OData API from Your Local CAP Java ProjectHow to Call a Remote OData API from Your Local CAP Java ProjectThe Business Accelerator Hub sandbox called from a CAP Java project on a laptop, with a concrete finish line — a localhost URL that returns business partners. Everything needed to get there is listed, Maven and JDK versions included.Umezuki, published 2025-08-11
How to fix npm error notarget @sap/hdi-deploy when you create a CAP app in BASHow to fix npm error notarget @sap/hdi-deploy when you create a CAP app in BASA specific npm failure when creating a CAP app from a template, and the post now opens with its own July 2025 update saying the version has been published so this instance is gone. It stays useful because the cause — a dependency pointing at a version nobody published yet — recurs, and the unblocking steps are general.Ryota_Ito, published 2025-07-28
Remote Debugging of SAP CAPM App - NodejsRemote Debugging of SAP CAPM App - NodejsDebugging a CAP Node.js application that is not on your machine, built up from cds init and a custom action so there is something to breakpoint. The part people need is at the end; the beginning is there so the end is reproducible.darshanv23, published 2025-06-05
Running CAP Node Applications in SAP Business Application StudioRunning CAP Node Applications in SAP Business Application StudioThe Run Configurations tool, which is where binding and mocking live in BAS rather than in a terminal. Three things it does: several named configurations per application in a tree, dependencies bound to real service instances, and OData dependencies mocked. The author notes the configurations are standard launch entries underneath, which is the detail that lets you leave the tool behind if you want to.liat_b, published 2020-10-22
SAP CAP Lessons Learned: SQLite is single threaded, HANA is notSAP CAP Lessons Learned: SQLite is single threaded, HANA is notA page long, and one of the more useful pages here: the local database serialises what the deployed one runs in parallel, so concurrency bugs are invisible until they are not. Filed by the author as something the tutorials do not make clear.LucasMagriniRigo, published 2025-01-22
SAP Cloud Application Programming Model（CAP）：概要およびデモ - Part 1SAP Cloud Application Programming Model（CAP）：概要およびデモ - Part 1Introduces SAP Cloud Application Programming Model as an open, opinionated framework that shoulders OData plumbing and database-specific code so a domain is modelled once in CDS, then builds a small bookshop project to show it: @sap/cds-dk's cds init scaffolds the project, cds watch serves it locally with live reload against an in-memory SQLite database, and a CatalogService projects a CDS domain model seeded from CSV files. The result is read as an OData service in the browser and exercised further through a Postman collection, with the optional @sap/vscode-cds extension noted for CDS syntax highlighting and completion in VS Code.rasai, published 2020-12-31
Set up a self-contained development environment for CAP Node.jsSet up a self-contained development environment for CAP Node.jsA CAP development environment that carries its own dependencies, so the machine it runs on stops being part of the setup.SAP
Surviving and Thriving with the SAP Cloud Application Programming Model: Local development hurdlesSurviving and Thriving with the SAP Cloud Application Programming Model: Local development hurdlesThree hurdles in running a CAP application locally: services mocked with cds run --with-mocks return no data across OData associations until the ON clause is hand-written into the imported CDS, an on-premise API reached through the SAP Cloud Connector times out because its proxy is part of destinations and connectivity and reachable only from inside SAP BTP, and a Fiori frontend served from the HTML5 Application Repository needs the HTML5 Repo Mock to reach a local backend at all. It closes with the launch configurations the author uses for debugging cds watch locally and attaching to a running Cloud Foundry instance.maxstreifeneder, published 2023-02-02
Plugin authoringSAP only
AI needs a foundation: A map of the plug-in ecosystem for CAPAI needs a foundation: A map of the plug-in ecosystem for CAPA map of the plug-ins for CAP (@sap/cds), official, community and independent, drawn across regions such as integration, performance and tooling, so that a team can see what exists to reuse and what it would have to build: the question plugin authoring answers from the other side. SAP's abstract places CAP at the centre of its AI strategy, with model context protocol support, and the map is offered as the foundation under that. A TechEd 2026 session (Tuesday 27 October, Community Theater, Berlin), presented by Mike Zaschka, written here from SAP's abstract; the recording is not yet published.
BTP CAP : Custom plugin to separate generic change log capture logicBTP CAP : Custom plugin to separate generic change log capture logicWalks through building a custom [CAP](ecosystem:cap) plugin that centralises change-log capture: on cds.once('served') it collects entities annotated @audit, then hooks srv.before('UPDATE') to read the existing record, diff it field by field against the incoming payload, and record old/new values with the user and timestamp. It also documents a cds build failure packaging the plugin's own directory into gen/srv for MTA deployment, fixed by adding it as a copyfiles build-parameter step in mta.yaml.sreehari_vpillai, published 2023-05-10
Create your first CAP pluginCreate your first CAP pluginA step-by-step guide to the cds-plugin.js extension point: scaffold a package, add an index.cds for shared model artifacts, and test it locally against a throwaway CAP project before publishing to npm, with a separate section on building the same plugin in TypeScript and compiling it with tsc. Points to the author's own cds-plugin-handlers and ui5-cap-serverside-rendering-plugin as worked examples.published 2024-12-09
DRY CAP – Making Sustainable Solutions Through PluginsDRY CAP – Making Sustainable Solutions Through PluginsA Devtoberfest 2026 building-apps session on packaging the things you would otherwise write twice, from in-house API clients and shared data models to validation logic, as a CAP plugin. The presenter builds one live: a cds-plugin.js next to package.json is what makes CAP notice the plugin at all, an index.cds carries a reusable user context and service that the consuming application projects into its own and protects there, and the plugin registers an Express middleware at a chosen step of the bootstrap to put user properties on the request. A feature-flagging plugin his team already uses closes it, and the whole walkthrough is the edge to Plugin authoring.SAP Developers, published 2026-10-02
How to build reusable plugin components for CAP Java applicationsHow to build reusable plugin components for CAP Java applicationsA companion to Daniel Schlachter's Reusable components for CAP with cds-plugin, showing the same mechanism on CAP Java: a plugin ships as its own Maven artifact with an event handler and a CdsRuntimeConfiguration implementation, registered through the JDK's ServiceLoader rather than any CAP-specific wiring. The walkthrough builds a cds-emoji-plugin-java jar that decorates @emoji-annotated fields on read, installs it to the local Maven repository, and adds it as a runtime dependency to a cds init --add java bookshop application. It argues the plugin mechanism was not new to CAP Java, just previously undocumented.robinjayasinghe, published 2023-05-16
Reusable components for CAP with cds-pluginReusable components for CAP with cds-pluginThe post that taught the mechanism, and it teaches it by picking a requirement small enough to be absurd: every string a service returns should end in a random emoji. Working through that on the bookshop example leaves nothing to argue about except the plumbing, which is the point — what a cds-plugin is, where it hooks in, and why packaging it beats copying it into the next project. Vinícius Barrionuevo credits this post as the thing that gave him the idea for sap-cap-sdm-plugin, and it is hard to read the plugin ecosystem in this graph without it.published 2023-04-30
SAP AI Services - DOX - Gen AI with SAP CAP Plugin - Part 3SAP AI Services - DOX - Gen AI with SAP CAP Plugin - Part 3Building on Reusable components for CAP with cds-plugin by Daniel Schlachter, this part walks through a custom CAP plugin — a cds-plugin.js plus a lib_cap_dox.js helper — that authenticates against SAP's Document Information Extraction (DOX) service and calls its schema and job-status APIs to fill an entity from extracted document fields. It covers reading the service key from Cloud Foundry (cf service-key) for the OAuth token endpoint, and dynamically mapping DOX's header and line-item output onto CAP entity properties.sabarna17, published 2024-06-11
What's in Daniel Hutzel's brain?What's in Daniel Hutzel's brain?A Devtoberfest 2026 session in the building-apps track, in which Daniel Hutzel and DJ Adams work through what the CAP team is building for agents. A bookshop gets an MCP endpoint beside its OData one from a single annotation, with the plugin writing the coding agent's configuration itself; in the xt-travels sample five services that know nothing about each other are served over MCP and an agent does the orchestration the hand-built UI and its value helps used to do. Hutzel then annotates a service as an agent so the ReAct loop and the choice of model move into the CAP service, and finally drops MCP for a skill that teaches the agent CQL instead, which is where the edges to Serve your application over MCP, Agent tooling and Agent guidance come from. The mechanism under all of it, a plugin file in the package root and event handlers that can be added to any CAP service, is the edge to Plugin authoring.published 2026-10-02
Seed dataCommunity only
Add useful Extensions to Dev spaces in SAP Business Application StudioAdd useful Extensions to Dev spaces in SAP Business Application StudioStarts from the point capire makes — that CAP is editor-agnostic and BAS is the preconfigured option — and then does the thing that undoes preconfiguration: adds two extensions to a dev space for initialising data in a CAP application, with the uninstall procedure as well as the install. The uninstall half is what makes it worth keeping.showkath_naseem, published 2022-11-13
Avoiding Data Loss When Loading Initial Data with CSV Files in CAPAvoiding Data Loss When Loading Initial Data with CSV Files in CAPcds add tiny-sample gives you a CSV in db/data and it loads on deploy, which looks like a way to seed a productive application. The catch, stated plainly: change the CSV or the schema and HANA is reinitialised from the file, taking whatever users had entered with it.MioYasutake, published 2025-09-15
CAP: Consume External Service - Part 1CAP: Consume External Service - Part 1Builds a CAP Node.js service from scratch that consumes the public NorthWind OData V4 service: cds import turns its EDMX metadata into a CSN model under srv/external, and a CatalogService projects Products from it with a custom READ handler that runs the request through cds.connect.to('NorthWind'). Shows the same projection working two ways — against a CSV mocked under srv/external/data with the <service>-<entity>.csv naming the framework expects, then against the real service once credentials.url is added to the CAP configuration and @sap-cloud-sdk/http-client is installed — and defers routing that connection through the Cloud Foundry Destinations service to the next post in the series.published 2020-05-26
Handling CSV Data Deployment in CAP HDI Without Data LossHandling CSV Data Deployment in CAP HDI Without Data LossThe same trap from the HDI side: .hdbtabledata hands the container full ownership of the data, so the next deployment overwrites the table from the file. Two independent posts three months apart on the same sharp edge, which is a fair signal about how sharp it is.Sekar_Somasundaram, published 2025-06-04
TestingSAP and community
CAP full-stack testing with BDD flavourCAP full-stack testing with BDD flavourIntroduces Behavior-Driven Development for CAP applications: specifications written in Gherkin against a running app, validated by Cucumber, using cds-cucumber's ready-made step definitions for SAP Fiori elements and OData screens. The library handles service lifecycle — starting the app, assigning a port, driving the browser and authenticating a named user — and its OData steps know the service's entities and fields from the CDS model itself, so a scenario can open a list report, search it and assert row counts without hand-written glue code.published 2023-10-10
Create Automated System Tests for SAP Cloud Application Programming Model ProjectsCreate Automated System Tests for SAP Cloud Application Programming Model ProjectsEnd-to-end tests driving the UI with wdi5, run in the pipeline — the layer above cds.test, which stops at the service boundary.SAP
Enhancing Unit Testing in SAP CAP Java Applications with GitHub CopilotEnhancing Unit Testing in SAP CAP Java Applications with GitHub CopilotBuilt on SAP's own CAP Java unit-testing guide, and the question is narrow: how much of that does an assistant actually write for you. The author's own getting-started post is the one to read first.Anjali_Pathak, published 2025-09-04
How to Restrict CRUD Operations in SAP CAPM Using @Capabilities, @readonly and Test APIs with .httpHow to Restrict CRUD Operations in SAP CAPM Using @Capabilities, @readonly and Test APIs with .httpEntities are exposed with full CRUD by default, and this is how to take operations away again — @Capabilities for Insert, Update and Delete individually, @readonly for the blunt version. Tested with .http files rather than a UI, which keeps the check on the service.DeepaRagho, published 2026-05-22
TypeScript patternsDoes not apply
How to use Cloud SDK for AI in an existing CAP NodeJS Project in CommonJSHow to use Cloud SDK for AI in an existing CAP NodeJS Project in CommonJSA dependency that is ESM-only inside a project that is CommonJS, and the author's judgement that converting the project was too risky. What follows is the esbuild workaround, which is the honest answer when the ecosystem has moved and your codebase has not.Jacky_Liu1, published 2025-08-01
How we could potentially have nestjs as runtime for SAP CAPHow we could potentially have nestjs as runtime for SAP CAPA proof-of-concept that swaps @sap/cds's ApplicationService and ODataAdapter dispatch for NestJS controllers, providers and interceptors, built by the author to learn NestJS rather than to ship a runtime. It works through CAP's run-dispatch-handle loop and AsyncLocalStorage-based transaction boundaries in detail before mapping them onto NestJS dependency injection and interceptors — one community answer to the controller-service-repository layering question core TypeScript support leaves open. The author's own conclusion is that the result reimplements CAP Java in Node.js, and they do not plan to take it further.alex_myakinkii, published 2024-09-19
Quick Implementation of DI/DI Container on SAP CAP: Node.js Hands-on PartQuick Implementation of DI/DI Container on SAP CAP: Node.js Hands-on PartThe hands-on half of a pair — the theory is in the author's earlier post — built on the official bookshop sample with the directories flattened so the pattern is visible rather than the scaffolding. Assumes CAP and TypeScript already.Umezuki, published 2025-05-02
Use TypeScript with the SAP Cloud Application Programming ModelUse TypeScript with the SAP Cloud Application Programming ModelWritten from the position of someone who avoided JavaScript for years and then had to cover CAP, which gives it a useful angle: what TypeScript buys a person arriving from a typed language, and where to start rather than how to finish. Ends on a worked example rather than a survey.KevinR, published 2024-06-24
TypingSAP only
TypeScript Sheriff: How can I use TypeScript in the SAP ecosystem? (Part 2 of 3)TypeScript Sheriff: How can I use TypeScript in the SAP ecosystem? (Part 2 of 3)The middle part of three, and the one about SAP: where TypeScript is supported across a side-by-side extension on BTP, as of July 2023. It says the SAP Cloud SDK already generates OData clients as .ts files and UI5 ships types for its controls and modules, the ground of TypeScript support in UI5, while CAP offers standard types and the new @cap-js/cds-typer generates types for a service, which is typing, with the caveat that running cds-ts commands could overwrite what cds-typer generated.MikeDoyle, published 2023-07-05
DocumentationSAP and community
⚡Unlocking the Power of LLMs in CAP: Understanding llms.txt and llms-full.txt⚡Unlocking the Power of LLMs in CAP: Understanding llms.txt and llms-full.txtllms.txt and llms-full.txt for CAP — a plain-text map of the documentation, written for an agent that arrived by fetching a URL rather than one somebody configured. The convention the atlas uses for itself, applied to capire.Yogananda, published 2025-05-18
AI-assisted SAP development with MCPAI-assisted SAP development with MCPA Devtoberfest 2026 session (UI-41) that traces AI-assisted SAP development from pasting code into a chat window to coding agents with built-in connectors, and sorts the MCP servers around SAP development into SAP's own, the community's and the hosted ones, where the agent cannot change what the server allows. Four demos follow: GitHub Copilot alone explaining an ABAP report from a Git repository, @ui5/mcp-server reading an OpenUI5 sample app and converting it to TypeScript, mcp-sap-docs grounding Terraform files for a BTP subaccount the presenter had not written before, and arc-1 with Copilot in Eclipse tracing why a title longer than 40 characters is rejected and proposing the DDIC-allowed length instead. It ends on a skill that migrates an SAP Gateway project on an ECC system to RAP on S/4HANA step by step, and on a rule Marian Zeis gives for servers written for internal use: keep them read-only, because what the agent is short of is context.published 2026-10-16
Bring "developers.sap.com" Into Your Dev Environment: SAP Developer Context for AI Coding AgentsBring "developers.sap.com" Into Your Dev Environment: SAP Developer Context for AI Coding AgentsDevtoberfest 2026 session FA-11: a tour of the rebuilt developers.sap.com by the team that runs it, from the administration screens behind the home page to the agent interfaces in front of it. The site is a CAP application on SAP HANA Cloud and SAP BTP, open-sourced in full, and the half of the session that places it here is how its content reaches an agent: every tutorial is also served as markdown, a coding agent is detected and given that version instead of the HTML, a well-known agent card advertises what the site offers, and SAP Developers MCP answers questions about tutorials, news and a reader's own completion history in Claude Code and Joule Desktop, over OAuth or a personal access token. Behind the answers sit two things working together: a knowledge graph in the HANA database over 1400 tutorials and 11,000 concepts, and SAP AI Core for the Joule interactions and the embeddings, with the agent harness written for the site rather than taken off a shelf. Where neither MCP nor A2A is available, the same content is published as skills.SAP Developers, published 2026-09-25
How I Use AI for Development and Why Context MattersHow I Use AI for Development and Why Context MattersPart one of the AI ABAP development series traces a move from pasting ChatGPT output and error messages back and forth to tools that search, read docs and inspect files themselves, and holds that the context around a model decides more in real projects than benchmark results do. In SAP work the grounding comes from mcp-sap-docs, which brings SAP Help, GitHub repositories, style guides and DSAG guidelines into the session, and context for changing a class also means the tables it uses, the classes it calls and similar implementations. Agentic autonomy is a slider set per project, with the time saved on typing moved into planning and review, and the post stops before ABAP: SAP's MCP servers for UI5, CAP and Fiori (@ui5/mcp-server, @cap-js/mcp-server, @sap-ux/fiori-mcp-server) sit in off-stack work that git and pipelines already gate, and the harder ABAP case is left to the next part.published 2026-04-20