Everything in CAP / Java
131 of 738
Domain
Signals
Content: 4
Java: Answers in Java
More
Group by: Capability
EntryBySignalsLast activity
Error handlingSAP only
Effective Axios Error Logging for Robust SAP IntegrationsEffective Axios Error Logging for Robust SAP IntegrationsTwo logged failures printed side by side, and the point is made by looking at them: one tells you what went wrong and one does not. Axios buries the useful part of an HTTP error, and this is what to unwrap before logging it from a CAP service.Sahil2508, published 2025-08-31
GraphQLUnmapped
CAP: GraphQL as new protocolCAP: GraphQL as new protocolWritten days after @cap-js/graphql appeared, by somebody who went looking for it — an introduction to GraphQL alongside what the adapter actually does to a CAP service. The first outside account of the capability, and still one of very few.jhodel18, published 2023-03-18
CAP: GraphQL as new protocol
@cap-js/graphql has been through 11 major lines since this was published, most recently 0.12 (2025-05), 0.13 (2025-07), 0.14 (2025-10). Affects Runnable code.
ODataSAP and community
Adding Immutable Blockchain Proofs to SAP With CAP - Cardano and OData V4Adding Immutable Blockchain Proofs to SAP With CAP - Cardano and OData V4The write-up behind ODATANO, by its author: how a public blockchain gets reachable from CAP as an ordinary OData V4 service rather than through a bespoke client. The premise it starts from is worth the read on its own — SAP systems are trusted but mutable, which is what an immutable anchor is for — and Cardano is chosen for peer-reviewed research and formal methods rather than for popularity. Written as an experiment with feedback invited, not as a recommendation.maxalexweber, published 2026-05-15
Consume Remote Services in a Full-Stack CAP ApplicationConsume Remote Services in a Full-Stack CAP ApplicationExtending the Developer's Guide application with a remote S/4HANA service — connectivity, importing the Business Partner API, and running against it. SAP publishes this as four separate paths: mock server or real S/4HANA Cloud, times Cloud Foundry or Kyma. One entry covers all four, because the difference between them is which backend and which runtime, not what you learn.SAP
Extend SAP SuccessFactors on SAP BTP with the SAP Cloud Application Programming ModelExtend SAP SuccessFactors on SAP BTP with the SAP Cloud Application Programming ModelTwelve tutorials, about two hours, building a side-by-side extension of SuccessFactors on BTP. The spine is remote services: importing the SuccessFactors OData service definitions into a CAP model, then treating them as entities the extension reads and writes through, rather than as an API called from a handler. Indexed as one entry because the parts only make sense in order.SAP
The Complete Guide to Calling Actions in UI5 with Custom CodeThe Complete Guide to Calling Actions in UI5 with Custom CodeWritten because the documentation is thin and the samples sparse, and openly as a note to the author's future self — hand-coding an action call has become a rare task for anyone mostly working in Fiori elements, which is exactly why it is hard to look up when it comes round. Comes with a CAP sample project, so the service half is there too.published 2025-07-21
OpenAPIUnmapped
Adding a Swagger UI to Your SAP Cloud Application Programming Model / Node.js ServiceAdding a Swagger UI to Your SAP Cloud Application Programming Model / Node.js ServiceThe problem stated from the other side of the wire: a CAP and HANA backend consumed by frontend developers with no SAP background, who said in the first meeting that they could not work from what the service offered. A browsable API page is the answer, and this is the post the Swagger UI plugin indexed here exists to serve.published 2020-01-23
Adding a Swagger UI to Your SAP Cloud Application Programming Model / Node.js Service
cds-swagger-ui-express has been through 11 major lines since this was published, most recently 0.9 (2024-07), 0.10 (2024-10), 0.11 (2026-02). Affects Runnable code.
Serve your application over MCPSAP only
Add MCP capabilities to a CAP serviceAdd MCP capabilities to a CAP serviceA fifteen-minute walkthrough of turning a plain CAP service into an MCP server: annotate the service with @mcp, install @cap-js/mcp, and it is served alongside OData at /mcp/<path>. The part worth reading it for is what happens next — cds watch writes the endpoint into the local agent's own configuration file, so OpenCode or Claude Code can call the service without anyone editing JSON by hand. It is built on the tiny-sample facet, so there is nothing to prepare, and it shows the protocol traffic rather than only the result. Written while the adapter was in beta, and it says so.published 2026-08-13
Agentic CAP: Build MCP servers and enterprise AI agentsAgentic CAP: Build MCP servers and enterprise AI agentsCAP applications become AI agents over the Model Context Protocol and the Agent2Agent protocol, which is the serve your application over MCP concern, and SAP AI Core is the LLM integration through which AI is embedded in a CAP app, with recommendations from the SAP-RPT-1 model as the abstract's example. The abstract names the two protocols and the one model and does not say which packages carry them. A two-hour TechEd 2026 session in a hands-on room (Tuesday 27 October, Berlin), presented by Daniel Hutzel, Daniel Schlachter, Marc Huber and Sami Lechner, written here from SAP's abstract; the recording is not yet published.
CAP Node.js Expert Session #6 - The MCP AdapterCAP Node.js Expert Session #6 - The MCP AdapterDaniel Schlachter and DJ Adams add @cap-js/mcp to a bookshop service, inspect its describe, query and action tools, and query the catalogue through an AI agent. The session distinguishes this runtime adapter from the development-time MCP server and demonstrates automatic registration of the running service with a local agent. The recording describes the adapter as beta in July 2026, with read-only queries and writes through unbound actions.
Examine the details of the Model Context Protocol on startupExamine the details of the Model Context Protocol on startupWhat the MCP adapter actually does when a CAP server boots, watched rather than described — the companion to the tutorial that switches it on.
Model Context Protocol Adapter — CAP guideModel Context Protocol Adapter — CAP guideDocuments @cap-js/mcp and com.sap.cds:cds-adapter-mcp, service annotations, generated describe/query/call tools and local client setup. The guide records Java doc-comment configuration, unbound-action-based data changes, incomplete XSUAA PKCE support and the adapter’s governance boundaries.
Natural Language Queries for SAP CAP via MCP: The LLM Translates, CDS ExecutesNatural Language Queries for SAP CAP via MCP: The LLM Translates, CDS ExecutesThe division of labour is the argument, and it is in the subtitle: the model turns English into a CDS query and CDS runs it, so nothing generates SQL and nothing hallucinates a join. Schema annotations do the resolving. Long, with the package, the repository and the MCP registry entry all linked.Shahid, published 2026-06-25
The Easiest Way to Expose a CAP Node.js Project as an MCP ServerThe Easiest Way to Expose a CAP Node.js Project as an MCP ServerFrom cds init to a running MCP server in a handful of steps, ending at the MCP Inspector so the result is something you can see rather than something you have to trust. The claim it makes for the plugin is the absence of work: no REST wiring by hand, the CAP application exposed as a server because the package is installed. A walkthrough rather than an argument — the reasoning about what should be exposed lives elsewhere.Jacky Liu, published 2026-07-03
WebSocketUnmapped
CAP WebSocketsCAP WebSocketsThe early one, from 2021, before an adapter existed to make it ordinary. Read for what the problem looked like when it had to be solved by hand.vvdries, published 2021-01-26
Analytical queriesUnmapped
Discovering SAP Fiori Elements Analytical functions by implementing SAP Support Message ReportingDiscovering SAP Fiori Elements Analytical functions by implementing SAP Support Message ReportingAnalytical annotations learned by building something the author wanted — a view over SAP support messages — after a conversation in February 2021 that the post dates precisely. Exploration written up as exploration.published 2021-03-14
E2E: SAP Cloud Platform Internet of Things to SAP Analytics CloudE2E: SAP Cloud Platform Internet of Things to SAP Analytics CloudDevice data from ingestion to chart, with CAP occupying the middle: a CDS-defined persistence on HANA Cloud, and an OData service published from it for Analytics Cloud to consume live. The interesting choice is that CAP is used for the model rather than for business logic — there is barely any.Gunter, published 2020-08-31
Predictive Asset Insights embedded Live analytics using CAP and SACPredictive Asset Insights embedded Live analytics using CAP and SACCAP as the layer between a line-of-business application's data and a live Analytics Cloud story embedded back into it — master data and operational data both. Structured as ten steps, which keeps it honest about how much of this is configuration rather than modelling.Saif, published 2021-07-18
SAP Data and Analytics Showcase – Use SAP Cloud Application Programming Model to Develop a Machine Learning Application on SAP BTPSAP Data and Analytics Showcase – Use SAP Cloud Application Programming Model to Develop a Machine Learning Application on SAP BTPThe instalment where the showcase becomes code: the CAP application built in Business Application Studio, and the sub-scenario it covers implemented step by step. The overview post is the one that says why this piece exists at all.former_member10846, published 2022-08-12
SAP Incentive Management - Understanding of CSN file & CLI Command to generateSAP Incentive Management - Understanding of CSN file & CLI Command to generateCSN met from the far end: not as CAP's compiled model but as the interchange format a product hands to Analytics Cloud so a story knows the shape of the data. Explains what CSN is, why the format matters here, and the command that produces one.Yogananda, published 2024-11-19
AttachmentsSAP only
Building an Attachment Upload and Download Solution Using UploadSetwithTable ControlBuilding an Attachment Upload and Download Solution Using UploadSetwithTable ControlThe successor control to UploadSet posts the file in one request by default, and against CAP that is wrong: the record has to be created first and the content put to it afterwards. The author states the two-step shape plainly and notes it may not apply to an ABAP backend, which is the kind of boundary that usually goes unsaid. Written during a proof of concept for a reusable attachment component, and it carries the problem they hit with the control.published 2025-03-13
Consume SAP Document Management using @cap-js/sdm pluginConsume SAP Document Management using @cap-js/sdm pluginStoring attachments in a SAP Document Management repository from a CAP application, using the official plugin. The point the post makes about the plugin is that it brings its own UI: a user attaches any number of documents and one Save writes them all to the repository, so the application does not build an upload surface of its own.published 2024-08-26
Media Handling in SAP CAPM – Backend and Frontend ImplementationMedia Handling in SAP CAPM – Backend and Frontend ImplementationFiles against a record with the front end included, which most of the attachments writing here leaves out — the entity that stores the content, the custom logic around it, and then the UI5 side that uploads and retrieves. End to end rather than one half.published 2026-03-02
Unlocking Efficiency: Leveraging SAP BTP Document Management Service in Fiori Applications # 2Unlocking Efficiency: Leveraging SAP BTP Document Management Service in Fiori Applications # 2Document Management's own Attachment Reuse UI dropped into a Fiori elements List Report, in two variants — OData V2, and OData V4 in a CAP application. The CAP half is one of the two scenarios rather than the subject; the rest of the series is about custom Fiori apps and a process task UI, with no CAP in them.published 2024-12-10
Use SAP Document Management Service Plugin In CAP NODEJS Step by Step GuidanceUse SAP Document Management Service Plugin In CAP NODEJS Step by Step GuidanceThe official plugin is documented in capire; this is somebody who set it up anyway and wrote down where it went wrong. The author says as much — the point is to spare customers the troubles, so the value is in the order of the steps and the prerequisites, not in the API.Jacky_Liu1, published 2025-03-06
Working with the Attachment plugin - Cloud Application ProgrammingWorking with the Attachment plugin - Cloud Application ProgrammingOne instalment of the author's own series working through the CAP plugins one at a time, and it reads as that: what the plugin does, how it does it, and how to put it in a service. Written from the plugin list in capire rather than from a problem, which makes it the plainest introduction here.published 2024-05-18
Working with the Attachment plugin - Cloud Application Programming
@cap-js/attachments has been through 3 major lines since this was published: 2 (2025-03), 3 (2025-10), 4 (2026-08). Affects A recipe, Runnable code.
CachingUnmapped
Performance Boost and Caching Strategy for Faster Data Access using "cds-caching" in SAP CAPPerformance Boost and Caching Strategy for Faster Data Access using "cds-caching" in SAP CAPSomebody else's account of using the plugin, which is the useful counterpart to its documentation. The case is specific: a master-data entity of more than a million rows, rarely written and constantly read, where the read-heavy shape is what makes caching worth the complexity rather than a general performance wish. Walks through integrating cds-caching into that application and what it changed.NaveenChandar, published 2025-03-04
Performance Boost and Caching Strategy for Faster Data Access using "cds-caching" in SAP CAP
cds-caching has been through 4 major lines since this was published, most recently 1 (2025-07), 2 (2026-07), 3 (2026-08). Affects A recipe, Runnable code.
Data modellingSAP only
A CAP Plugin for Flexible Number Range Management: cds-numberrange-pluginA CAP Plugin for Flexible Number Range Management: cds-numberrange-pluginThe author's own plugin, and the reason given for writing it is about plugins rather than about number ranges: a year of using them convinced them that this was the way to extend CAP without leaving marks on the application. Sequential document numbers are the thing it does; keeping the host project clean is the thing it argues for.abdulbasit, published 2025-06-17
Deep Insert in SAP CAPM Using Composition and Fiori ElementsDeep Insert in SAP CAPM Using Composition and Fiori ElementsParent and children created in one transaction, which composition already gives you in the model — the post is about what Fiori elements does with it, and what the payload looks like when the UI sends both at once.published 2026-05-22
Learn how to define constraints declaratively in your CDS modelLearn how to define constraints declaratively in your CDS modelConstraints expressed in the model rather than checked in a handler — the distinction the atlas draws between input validation the framework enforces and validation somebody writes.SAP
Database connectorsSAP only
Building agentic applications with SAP HANA CloudBuilding agentic applications with SAP HANA CloudA CAP application extended with semantic search and agent features on top of SAP HANA Cloud's vector engine and SAP AI Core, built in a hands-on workshop. The abstract names the parts, CAP, the vector engine and AI Core, and the two additions: semantic search, the retrieval half of retrieval-augmented generation, and LLM-supported agent capabilities inside the application, which is agent tooling. Which embedding model, which CAP runtime and how the agent calls its tools are not stated. A TechEd 2026 session (Thursday 29 October, Berlin), presented by Hui Li, Ritty Joseph, Shraddha Shetty and Tanuja Jadhav, written here from SAP's abstract; the recording is not yet published.
Get hands on with tabular AI and forecasting models in SAP HANA CloudGet hands on with tabular AI and forecasting models in SAP HANA CloudPrediction and forecasting as predictive models inside SAP HANA Cloud, worked through hands-on: tabular AI models such as SAP-RPT-1 for on-the-fly predictions, time series foundation models for ad hoc forecasts, and the AutoML in the predictive analysis library. The abstract names the model kinds and the library and does not say how a model is called from SQL or from an application. A TechEd 2026 session (Wednesday 28 October, Berlin), presented by Christoph Morgen, Markus Fath, Ritty Joseph and Tanuja Jadhav, written here from SAP's abstract; the recording is not yet published.
Knowledge graph and agent memory: Build an agent that remembersKnowledge graph and agent memory: Build an agent that remembersThe knowledge graph engine in SAP HANA Cloud as an agent's memory: what the engine, the graph side of graph, spatial and document data, does in an agentic workflow, how an agent keeps what it learns there, the state agent tooling holds between turns, and the SAP AI Core integration through which the database calls LLMs and tabular foundation models such as SAP-RPT-1. The abstract names the engine, the memory role and the AI Core link and does not say how the memory is written or read. DA205 on Tuesday 27 October is the 45-minute talk on the same engine, with a near-identical abstract and a different cast. A two-hour hands-on TechEd 2026 session (Wednesday 28 October, Berlin), presented by Christoph Morgen, Jan Zwickel, Markus Fath and Thomas Hammer, written here from SAP's abstract; the recording is not yet published.
Use SAP HANA as the Database for a CAP Java ApplicationUse SAP HANA as the Database for a CAP Java ApplicationMoving a CAP Java application off the development database onto HANA, which is the step where the persistence choice stops being invisible.SAP
Using HANA Cloud’s "VECTOR_EMBEDDING" Function in CAPUsing HANA Cloud’s "VECTOR_EMBEDDING" Function in CAPEmbeddings generated inside the database rather than fetched from AI Core or an external model — a Q4 2024 HANA Cloud function, used from CAP. The shift it describes is where the embedding step lives, which changes what has to be deployed and what has to be called.published 2025-03-02
Native SAP HANA artifactsUnmapped
How to share tables across different CAP projectsHow to share tables across different CAP projectsFour scenarios for reading one CAP project's table from another, worked out as a matrix of what each one needs: the same HDI container and namespace, the same container under a different namespace, a different container, and a different Cloud Foundry space. The mechanics change with each step — @cds.persistence.exists on the reused entity throughout, an .hdbsynonym once namespaces diverge, .hdbrole and .hdbgrants once containers do, and a user-provided service built from the grantor's credentials once spaces do. The author flags the caveat themselves: these are learning scenarios, and consuming the OData service is often the better answer than reaching into another project's database. Dated corrections from twelve days after publication sit inline — synonyms need only the name because the configuration comes from .hdbsynonymconfig, SERVICE_REPLACEMENTS in mta.yaml removes the hard-coded service name, and the reused container need not be bound to the srv module.published 2021-10-03
Schema evolutionCommunity only
HANA Database Migration: Handling Incompatible Changes to Existing TablesHANA Database Migration: Handling Incompatible Changes to Existing TablesThe question schema evolution exists for, asked plainly: how do you restructure a table in a production system that already holds live data. Incompatible changes are the ones CAP's own alter path will not make, which is where this starts.Sekar Somasundaram, published 2025-04-16
DestinationsSAP only
Consume Remote Services in a Full-Stack CAP ApplicationConsume Remote Services in a Full-Stack CAP ApplicationExtending the Developer's Guide application with a remote S/4HANA service — connectivity, importing the Business Partner API, and running against it. SAP publishes this as four separate paths: mock server or real S/4HANA Cloud, times Cloud Foundry or Kyma. One entry covers all four, because the difference between them is which backend and which runtime, not what you learn.SAP
Consume SOAP Web Services in SAP Cloud Application Programming ModelConsume SOAP Web Services in SAP Cloud Application Programming ModelCalling a SOAP service from CAP — the case the remote-service story does not cover, since CAP's own import path speaks OData and OpenAPI.SAP
Establishing connectivity between a local CAP runtime and on-premise systemsEstablishing connectivity between a local CAP runtime and on-premise systemsReaching S/4HANA, an on-premise HANA or any HTTP service from a CAP process running on your laptop — the case where the connectivity proxy the platform provides is not there and the tunnel has to be arranged.vLeonkev, published 2025-10-15
Extend SAP SuccessFactors on SAP BTP with the SAP Cloud Application Programming ModelExtend SAP SuccessFactors on SAP BTP with the SAP Cloud Application Programming ModelTwelve tutorials, about two hours, building a side-by-side extension of SuccessFactors on BTP. The spine is remote services: importing the SuccessFactors OData service definitions into a CAP model, then treating them as entities the extension reads and writes through, rather than as an API called from a handler. Indexed as one entry because the parts only make sense in order.SAP
Extending SAP Sales and Service Cloud V2 Using CAPExtending SAP Sales and Service Cloud V2 Using CAPAn extension target that does not run on BTP at all — Sales and Service Cloud V2 sits directly on hyperscalers — so the separation between core and extension is enforced rather than encouraged. That constraint is what makes the post worth reading.Quablab, published 2025-07-09
How to Call a Remote OData API from Your Local CAP Java ProjectHow to Call a Remote OData API from Your Local CAP Java ProjectThe Business Accelerator Hub sandbox called from a CAP Java project on a laptop, with a concrete finish line — a localhost URL that returns business partners. Everything needed to get there is listed, Maven and JDK versions included.Umezuki, published 2025-08-11
Implementing Dynamic Subaccount-Based Routing in SAP CAP with SAP BTP DestinationsImplementing Dynamic Subaccount-Based Routing in SAP CAP with SAP BTP DestinationsWhy environment variables are the wrong place for backend endpoints in a CAP application, and what replaces them: cockpit destinations resolved at runtime, with the subaccount or instance identified as the request is handled. The argument is about redeployment — an endpoint kept in the environment means a deploy every time it moves — and the shape it produces is one codebase serving several landscapes without a build per landscape.Dnyaneshwar Salve, published 2026-03-18
Use the SAP Cloud SDK in the SAP Cloud Application Programming ModelUse the SAP Cloud SDK in the SAP Cloud Application Programming ModelReaching for the Cloud SDK from inside a CAP service, for the calls CAP's own remote services do not make.SAP
Document outputUnmapped
Generating PDF on BTP CF using CAP and PuppeteerGenerating PDF on BTP CF using CAP and PuppeteerA headless browser rendering the PDF, which is the answer people reach for when the document is really a web page. The Cloud Foundry part is the difficulty: Puppeteer needs a browser in the buildpack, and that is what the post is actually about.ltomazeli58, published 2024-03-28
How to Generate and Download PDFs on the fly without persisting in CAP ApplicationHow to Generate and Download PDFs on the fly without persisting in CAP ApplicationStreaming a generated document straight to the client without writing it anywhere first — which sidesteps the retention question a stored file creates, and is the distinction worth having beside the attachments capability.HarsithKumarReddy, published 2024-06-18
Using Custom Actions to display PDF from SAP BTP Forms service into a CAP SAPUI5 applicationUsing Custom Actions to display PDF from SAP BTP Forms service into a CAP SAPUI5 applicationA requirement that arrived after the application was finished — render a PDF from the record currently open on an object page — and the join it needed: the Forms service bound to the CAP application, a custom action on the service, and a button on the object page header calling it.rodfior, published 2023-01-30
Event MeshSAP only
Complete Guide: Setting Up CAP Plugin for Advanced Event Mesh with OAuth AuthenticationComplete Guide: Setting Up CAP Plugin for Advanced Event Mesh with OAuth AuthenticationWritten because the plugin's own documentation stops short of the prerequisites and the author had to assemble them from three other sources and a help chapter. It joins them: the OIDC application in Identity Authentication, the OAuth profile in Broker Manager, the token checked before anything is wired, and only then the plugin. The author says plainly it came out of trial and error and was going to be a README.rpagni, published 2025-11-10
Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 1/2Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 1/2The theory half of a pair introducing cds-kafka: what the plugin is for and what it can do, with event-driven architecture set up as the reason rather than assumed. Nothing is deployed here — the running application is part two — so this is the post to read if the question is whether Kafka belongs in the picture at all rather than how to wire it.published 2025-01-02
Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 2/2Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 2/2The practical half: concrete use cases for cds-kafka, running locally and on BTP. It opens by placing the plugin among SAP's own event-driven offerings rather than beside them, which is the part that decides whether you reach for this or for Event Mesh — a comparison a plugin's own README rarely makes about itself.published 2025-01-13
RFC connectivityUnmapped
Consume ABAP RFC Function Modules in CAPConsume ABAP RFC Function Modules in CAPCalling an existing RFC function module from CAP instead of asking somebody to build an OData service for it — which is the actual decision, since the alternative is custom development on the ABAP side for a function that already works.published 2025-03-28
Introducing open-rfc: Calling SAP RFC from Node.js Without the SDKIntroducing open-rfc: Calling SAP RFC from Node.js Without the SDKopen-rfc is a TypeScript and JavaScript RFC client for Node.js with no runtime dependencies and no SAP NetWeaver RFC SDK, written after SAP archived node-rfc and PyRFC and while the connector below @sap/cds-rfc needs an S-user, an SAP Build Code licence and a private registry. The history of RFC connectivity from Node.js is the first half; the second shows the package on its own, as an npm alias for node-rfc, and through an npm override as the connector below an unchanged @sap/cds-rfc. The 0.2.3 beta stops at direct application-server connections with password authentication and classic Unicode RFC: no message-server load balancing, SNC, tRFC, qRFC, bgRFC or server mode.published 2026-08-10
Agent access to your codeSAP and community
Before You Upgrade S/4HANA: Static UI5 Checks with MCPBefore You Upgrade S/4HANA: Static UI5 Checks with MCPA UI5 version upgrade checked against one app by pairing two MCP servers: the ui5_version_diff tool added to mcp-sap-docs, which reads a bundle from ui5-lib-diff downloaded once at setup and filters it by version range, change type, library or query text, and @ui5/mcp-server, whose get_project_info, get_version_info, run_ui5_linter and run_manifest_validation say what the app uses and what fails. Run with a ui5-versions-upgrade.md skill on the legacy app from From SEGW and Legacy UI5 to RAP with ARC-1, from SAPUI5 1.84.59 to 1.147.2, the diff range held 985 deprecations and 961 What's New entries, and the linting and manifest validation narrowed that to findings in this app, among them jQuery.sap.require, synchronous bootstrap, the sap_belize theme, sap.m.MessagePage and an old manifest _version. The checks read the source in a local checkout and never the deployed app, so the report is a first pass: a changelog entry is not proof that a workaround can be deleted, and the app still has to be run and tested.published 2026-05-20
Building a CAP service with cds‑mcp and Cline — HANDS‑ON SUPER BASIC GUIDE [ with screenshots ] 🍌Building a CAP service with cds‑mcp and Cline — HANDS‑ON SUPER BASIC GUIDE [ with screenshots ] 🍌Somebody following the CAP MCP server announcement all the way through, and writing down what it cost: a CAP service in VS Code wired to S/4HANA through a destination, plus the real bumps — Windows PATH and global installs — that the announcement does not have.smarchesini, published 2025-09-21
Evaluating SAP’s new MCP servers: UI5, CAP, and Fiori tools in practiceEvaluating SAP’s new MCP servers: UI5, CAP, and Fiori tools in practiceSomeone trying SAP's three new MCP servers rather than repeating the announcement. It sets the official positioning first — MCP as the bridge from coding assistants to SAP tooling across Cursor, Windsurf, Copilot, Cline and Claude Code, with best-practice scaffolds and BTP-aligned guardrails — and then reports what using them is actually like. The rare kind of post that tests a vendor claim.published 2025-09-04
From SEGW and Legacy UI5 to RAP with ARC-1From SEGW and Legacy UI5 to RAP with ARC-1Three ARC-1 skills, run in Cursor with Composer-2 against a deliberately rough demo on an S/4HANA 2023 trial system, turn the SEGW service ZDEMO_MIG_PROJECTS_SRV into a managed, draft-enabled RAP business object published as OData V4, replace its ApproveProject function import and its direct UPDATE ... COMMIT WORK with the action approve_project written in EML in local mode, and rebuild the freestyle UI5 JavaScript app once in UI5 TypeScript and once as a Fiori elements list report and object page driven by metadata extensions. What the published transcripts add is how the agent got there: it found the generated MPC class names and the custom logic in DPC_EXT only by reading the system, the skills made it print the extracted model and stop for confirmation before writing, and @ui5/mcp-server, mcp-sap-docs and @sap-ux/fiori-mcp-server each had their own job beside it. The demo is small on purpose, and the post says a productive SEGW service that calls BAPIs, carries custom authorisation logic or supports deep inserts is not solved with one prompt.published 2026-05-11
From SEGW and Legacy UI5 to RAP with ARC-1
@sap-ux/fiori-mcp-server has been through 2 major lines since this was published: 0.7 (2026-05), 1 (2026-05). Affects Runnable code.
Agent guidanceSAP and community
Building a CAP service with cds‑mcp and Cline — HANDS‑ON SUPER BASIC GUIDE [ with screenshots ] 🍌Building a CAP service with cds‑mcp and Cline — HANDS‑ON SUPER BASIC GUIDE [ with screenshots ] 🍌Somebody following the CAP MCP server announcement all the way through, and writing down what it cost: a CAP service in VS Code wired to S/4HANA through a destination, plus the real bumps — Windows PATH and global installs — that the announcement does not have.smarchesini, published 2025-09-21
Teaching AI Agents Best Practices: A Skills Workspace for CAP DevelopmentTeaching AI Agents Best Practices: A Skills Workspace for CAP DevelopmentStates the gap this capability exists for more precisely than most: an agent already knows CAP well enough to generate models, handlers and deployments, but knowing a framework and following its current practice reliably are different things, because a model defaults to whatever it saw most of during training — which may be outdated, subtly wrong, or simply not how a given team works. Skills are offered as the closing mechanism, and the post describes a workspace pattern rather than a single file, with the architecture claimed to be framework-agnostic.daniel_schlachter, published 2026-06-09
Agent toolingSAP only
Agent-led test management: Hands-on lab with Joule in SAP Cloud ALMAgent-led test management: Hands-on lab with Joule in SAP Cloud ALMThe Test Management Assistant, a Joule capability in SAP Cloud ALM, worked through on project scenarios: scoping requirements, detecting coverage gaps and generating test cases with AI. The edge is to SAP Joule, which the assistant runs on; SAP Cloud ALM has no entry here, and the atlas's testing concern, proving a service's model and handlers, is not this session's test management. A TechEd 2026 hands-on session (Wednesday 28 October, Berlin), presented by Christina Pickhardt, Daniel Lorenz, Niclas Weidner and Tobias Keller, written here from SAP's abstract; the recording is not yet published.
AI-accelerated RISE with SAP migration with the system transition workbenchAI-accelerated RISE with SAP migration with the system transition workbenchSAP Joule for Consultants and the RISE with SAP system transition workbench in a move to SAP S/4HANA Cloud Private Edition: readiness assessments, migration workflows and the SAP tools involved. The edge is to SAP Joule, of which Joule for Consultants is a part; the system transition workbench has no entry here, and Platform migration covers applications leaving older BTP platforms, not an ERP system's move. A TechEd 2026 hands-on session (Wednesday 28 October, Berlin), presented by Daniel Funkert, Kristin Aleksandrova, Mirja Kempin and Moritz Gysler, written here from SAP's abstract; the recording is not yet published.
ARC-1 with Joule Studio: Bringing Real ABAP System Context into JouleARC-1 with Joule Studio: Bringing Real ABAP System Context into JouleBrings the same BTP-deployed ARC-1 endpoint into Joule through a Joule Studio, classic edition agent configured with Anthropic Claude Sonnet 4 and two MCP servers, ARC-1 and mcp-sap-docs, for work that starts in SAP where the previous part started in Microsoft 365. Two read-only showcases carry the ABAP Cloud readiness edge: a clean core check of one class that reports it is not released, uses USR02 and BUT000 directly and has no ATC findings, and a modernisation backlog for package ZSD_LEGACY which, as that package did not exist, grouped 28 ZSD* objects into risk buckets instead. The route through SAP Integration Suite API Management or a future MCP gateway is presented as a target architecture and not yet a productive setup, because Joule Studio's documentation requires streamable HTTP destinations and does not support MCP servers that need interactive OAuth user authorisation.published 2026-05-06
ARC-1 with Joule Studio: Bringing Real ABAP System Context into Joule
arc-1 has been through 2 major lines since this was published: 0.9 (2026-05), 1 (2026-07). Affects Runnable code.
Building agentic applications with SAP HANA CloudBuilding agentic applications with SAP HANA CloudA CAP application extended with semantic search and agent features on top of SAP HANA Cloud's vector engine and SAP AI Core, built in a hands-on workshop. The abstract names the parts, CAP, the vector engine and AI Core, and the two additions: semantic search, the retrieval half of retrieval-augmented generation, and LLM-supported agent capabilities inside the application, which is agent tooling. Which embedding model, which CAP runtime and how the agent calls its tools are not stated. A TechEd 2026 session (Thursday 29 October, Berlin), presented by Hui Li, Ritty Joseph, Shraddha Shetty and Tanuja Jadhav, written here from SAP's abstract; the recording is not yet published.
Building custom Joule Agents with SAP Knowledge GraphBuilding custom Joule Agents with SAP Knowledge GraphCustom Joule Agents built in a hands-on with SAP Knowledge Graph and Joule Studio: discovering APIs from a user's intent, grounding an agent's answers in business context, and integrating data products for SAP Business Data Cloud. The agents are SAP Joule's; the Knowledge Graph is not an atlas entry, and the abstract does not say which Joule Studio edition the exercises use. A TechEd 2026 hands-on session (Wednesday 28 October, Berlin), presented by Jan Portisch, Lucas Kiesow, Pavithra G K and Rafael Martin, written here from SAP's abstract; no recording is announced.
Building Durable AI Agents - Announcing the cds-langgraph-persistence PluginBuilding Durable AI Agents - Announcing the cds-langgraph-persistence PluginThe announcement, and the argument behind it. Treating an agent as a software architecture rather than a model with tools makes a list of production requirements — identity, authn and authz, multitenancy, persistence, event-driven flows, scalability, observability, CI/CD — and the author's point is that CAP already answers most of them for BTP, which is what makes LangGraph inside CAP Node.js worth doing. The post then narrows to one of those requirements, durability, and the checkpointer that supplies it. Written from a year of building agents next to real business systems rather than as a framework tour.merbinjanselm, published 2026-07-15
Building Durable AI Agents - Announcing the cds-langgraph-persistence Plugin
@mi8y/cds-langgraph-persistence has been through 3 major lines since this was published: 0.5 (2026-07), 0.6 (2026-07), 0.7 (2026-09). Affects Runnable code.
Building enterprise agent extensions with the Joule Studio solutionBuilding enterprise agent extensions with the Joule Studio solutionExtending SAP's standard agents with third-party integrations and business actions in Joule Studio: agents that run a process across systems, call an external service, put an approval step in the middle and bring the result back into the business context, which is what SAP Joule's agents do and what Joule Studio, classic edition is in the atlas. The abstract names Joule Studio without saying which edition the exercise uses, and lists outcomes rather than the steps built. A TechEd 2026 hands-on session (Wednesday 28 October, Berlin), presented by Charan Ravikumar, Jacob Hornberger, Maria Kondratyeva and Michael Zadikowitsch, written here from SAP's abstract; the recording is not yet published.
Experience core foundational capabilities of SAP Cloud ERPExperience core foundational capabilities of SAP Cloud ERPGuided exercises in SAP S/4HANA Cloud Public Edition, which SAP calls the execution backbone of the Autonomous Enterprise: validating AI capabilities against master data for industry and domain needs, generating AI-driven KPIs and reporting summaries. The product is an external here and the abstract names no AI feature by name; the edge is to SAP Joule, SAP's AI layer across its applications and the one entry the AI capabilities of SAP Cloud ERP attach to, which the abstract itself does not name. A TechEd 2026 hands-on session (Wednesday 28 October, Berlin), presented by Akshat Kharial, Ankush Thareja and Nises Soni, written here from SAP's abstract; the recording is not yet published.
Generate agentic workflows using SAP-managed n8n in Joule StudioGenerate agentic workflows using SAP-managed n8n in Joule StudioSAP-managed n8n inside Joule Studio generates a workflow from a business intent a developer states, and the workflow is then tested and deployed, consuming line-of-business application APIs, events and agents in SAP Business AI Platform: process automation with the workflow generated from intent, and agent tooling where the workflow calls agents. The generated workflow sends notifications to the Joule Work mobile app of SAP Joule, to Microsoft Teams or to Slack. SAP's abstract names the pieces and not how the generation or the n8n hosting works. A two-hour hands-on TechEd 2026 session (Tuesday 27 October, Berlin), presented by Rama Sulakshani Murari, Rumen Dimitrov, Seshadri Sreenivas Ramanarayanan and Venugopal Chembrakalathil, written here from SAP's abstract; the recording is not yet published.
Knowledge graph and agent memory: Build an agent that remembersKnowledge graph and agent memory: Build an agent that remembersThe knowledge graph engine in SAP HANA Cloud as an agent's memory: what the engine, the graph side of graph, spatial and document data, does in an agentic workflow, how an agent keeps what it learns there, the state agent tooling holds between turns, and the SAP AI Core integration through which the database calls LLMs and tabular foundation models such as SAP-RPT-1. The abstract names the engine, the memory role and the AI Core link and does not say how the memory is written or read. DA205 on Tuesday 27 October is the 45-minute talk on the same engine, with a near-identical abstract and a different cast. A two-hour hands-on TechEd 2026 session (Wednesday 28 October, Berlin), presented by Christoph Morgen, Jan Zwickel, Markus Fath and Thomas Hammer, written here from SAP's abstract; the recording is not yet published.
SAP Joule for Consultants: Unified knowledge for requirements and designsSAP Joule for Consultants: Unified knowledge for requirements and designsFit-to-standard analysis as a consultant on a cloud transformation project: connecting an organisation's data to SAP Joule for Consultants through SAP AI Core, getting answers from SAP knowledge and that content, then building an expert, loading project files and running guided prompts. The edges are to SAP Joule, of which Joule for Consultants is a part, and to SAP AI Core, named as the connection path; how the data is grounded is left to the session. A TechEd 2026 hands-on session (Wednesday 28 October, Berlin), presented by Anantharaman Ravi, Natalie Han, Sachin Kaura and Yi Hsuan Lin, written here from SAP's abstract; the recording is not yet published.
Transform business data into AI-supported insightsTransform business data into AI-supported insightsBusiness metrics turned into insights, narratives and recommendations by SAP Joule's agents, with People Intelligence, the SAP Snowflake solution extension for SAP Business Data Cloud and SAP Analytics Cloud connected in SAP Business Data Cloud. The abstract names what is connected and what comes out, and does not say what the exercise builds or where the Snowflake extension sits in it; People Intelligence and the extension are not atlas entries. A TechEd 2026 hands-on session (Wednesday 28 October, Berlin), presented by Babacar Toure, Maximilian Paul Gander, Neetha Pucknat and San Tran, written here from SAP's abstract; the recording is not yet published.
Document extractionSAP only
Hands on SAP Document AI: Next-generation intelligent document processingHands on SAP Document AI: Next-generation intelligent document processingSAP Document AI configured and run by hand: schema design, splitting and classifying documents, enriching the extracted data and custom prompting are the exercises SAP's abstract names. Document extraction from the configuring side, with the schema the participant's own; which document types or models the exercises use is not stated. A TechEd 2026 hands-on session (Thursday 29 October, Berlin), presented by Christoph Lenschow, Tobias Weller and Tomasz Janasz, written here from SAP's abstract; no recording is announced.
Integrate CAP application as outbound channel for SAP Document AIIntegrate CAP application as outbound channel for SAP Document AIDocument AI will call you back when extraction finishes, and the callback is where this goes wrong: the CAP application has to accept an unauthenticated POST from outside without dropping CSRF protection for everything else. The answer is a middleware hooked into the CAP bootstrap, and the post spends its length on the token lifecycle rather than on the extraction.sdeissenboeck, published 2026-04-22
Integrating SAP Document Information Extraction (Document AI) with SAP CAP – Step by StepIntegrating SAP Document Information Extraction (Document AI) with SAP CAP – Step by StepThe forward direction, in full: a PDF or scan arriving at a CAP service, sent to Document Information Extraction, and the fields coming back into the model. Long, and step-by-step in the literal sense — the service binding and the request shapes are all written out.furkan5, published 2025-10-09
Use Free Tier to Create a Service Instance for SAP Document AIUse Free Tier to Create a Service Instance for SAP Document AIFour steps in the SAP BTP cockpit that end with a service key for SAP Document AI: open the cockpit, check the subaccount's entitlements and add the service on the free tier plan if it is not listed, create the instance, then create the key. It names the plans to use in production instead, blocks_of_100, embedded_edition and premium_edition, and stops at the credentials, before any document is uploaded.
Use Free Tier to Subscribe to SAP Document AI Basic UIUse Free Tier to Subscribe to SAP Document AI Basic UIEight steps from an entitled subaccount to the SAP Document AI basic UI open in a browser, and most of them are identity work rather than document work: getting a tenant for Cloud Identity Services, which the basic UI requires, activating the account and establishing trust with the subaccount, then subscribing, creating a user and assigning the Document_Information_Extraction_UI_Templates_Admin role collection. Using the UI to read a document is the subject of Use Machine Learning to Extract Information from Documents with the SAP Document AI Basic UI, which this tutorial names as what to read next.
LLM integrationSAP only
Agentic CAP: Build MCP servers and enterprise AI agentsAgentic CAP: Build MCP servers and enterprise AI agentsCAP applications become AI agents over the Model Context Protocol and the Agent2Agent protocol, which is the serve your application over MCP concern, and SAP AI Core is the LLM integration through which AI is embedded in a CAP app, with recommendations from the SAP-RPT-1 model as the abstract's example. The abstract names the two protocols and the one model and does not say which packages carry them. A two-hour TechEd 2026 session in a hands-on room (Tuesday 27 October, Berlin), presented by Daniel Hutzel, Daniel Schlachter, Marc Huber and Sami Lechner, written here from SAP's abstract; the recording is not yet published.
Building agentic applications with SAP HANA CloudBuilding agentic applications with SAP HANA CloudA CAP application extended with semantic search and agent features on top of SAP HANA Cloud's vector engine and SAP AI Core, built in a hands-on workshop. The abstract names the parts, CAP, the vector engine and AI Core, and the two additions: semantic search, the retrieval half of retrieval-augmented generation, and LLM-supported agent capabilities inside the application, which is agent tooling. Which embedding model, which CAP runtime and how the agent calls its tools are not stated. A TechEd 2026 session (Thursday 29 October, Berlin), presented by Hui Li, Ritty Joseph, Shraddha Shetty and Tanuja Jadhav, written here from SAP's abstract; the recording is not yet published.
cds-toon-ai-protocol-adapter: a pragmatic way to cut AI token costs using SAP CAPcds-toon-ai-protocol-adapter: a pragmatic way to cut AI token costs using SAP CAPNames a cost most CAP-plus-LLM writing ignores: every JSON payload streamed to a model is billed by its verbosity, in latency as well as money. The plugin brings TOON — Token-Oriented Object Notation — to a CAP service so the wire format changes without the service code doing so, in a REST variant and an OData one, with token counts reported on both sides.published 2026-01-25
Elevating Data Privacy in SAP CAP based GenAI Applications with CAP LLM PluginElevating Data Privacy in SAP CAP based GenAI Applications with CAP LLM PluginThe question underneath the enthusiasm: what leaves your landscape when a prompt goes to a model. The plugin's answer is to anonymise the sensitive fields through HANA before the prompt is sent, and this is the post that explains why that is the design rather than an option.AkashAmarendra, published 2024-02-02
Enhancing Enterprise Applications: AI-powered User Experience with SAP CAP AI PluginEnhancing Enterprise Applications: AI-powered User Experience with SAP CAP AI PluginStarts from the blank form nobody wants to fill in, and asks what an enterprise application should do about it. The AI is in service of that rather than the subject of it.published 2026-04-29
Knowledge graph and agent memory: Build an agent that remembersKnowledge graph and agent memory: Build an agent that remembersThe knowledge graph engine in SAP HANA Cloud as an agent's memory: what the engine, the graph side of graph, spatial and document data, does in an agentic workflow, how an agent keeps what it learns there, the state agent tooling holds between turns, and the SAP AI Core integration through which the database calls LLMs and tabular foundation models such as SAP-RPT-1. The abstract names the engine, the memory role and the AI Core link and does not say how the memory is written or read. DA205 on Tuesday 27 October is the 45-minute talk on the same engine, with a near-identical abstract and a different cast. A two-hour hands-on TechEd 2026 session (Wednesday 28 October, Berlin), presented by Christoph Morgen, Jan Zwickel, Markus Fath and Thomas Hammer, written here from SAP's abstract; the recording is not yet published.
Natural Language Queries for SAP CAP via MCP: The LLM Translates, CDS ExecutesNatural Language Queries for SAP CAP via MCP: The LLM Translates, CDS ExecutesThe division of labour is the argument, and it is in the subtitle: the model turns English into a CDS query and CDS runs it, so nothing generates SQL and nothing hallucinates a join. Schema annotations do the resolving. Long, with the package, the repository and the MCP registry entry all linked.Shahid, published 2026-06-25
SAP Joule for Consultants: Unified knowledge for requirements and designsSAP Joule for Consultants: Unified knowledge for requirements and designsFit-to-standard analysis as a consultant on a cloud transformation project: connecting an organisation's data to SAP Joule for Consultants through SAP AI Core, getting answers from SAP knowledge and that content, then building an expert, loading project files and running guided prompts. The edges are to SAP Joule, of which Joule for Consultants is a part, and to SAP AI Core, named as the connection path; how the data is grounded is left to the session. A TechEd 2026 hands-on session (Wednesday 28 October, Berlin), presented by Anantharaman Ravi, Natalie Han, Sachin Kaura and Yi Hsuan Lin, written here from SAP's abstract; the recording is not yet published.
SAP-RPT and TabPFN: Get started with tabular foundation modelsSAP-RPT and TabPFN: Get started with tabular foundation modelsTabular foundation models, SAP-RPT and TabPFN, in a hands-on with SAP and Prior Labs: the model families first, then predictions run through SAP AI Core with a workflow built on tabular orchestration and connected to the participant's own data for real-time predictions. A predictive models session with the models as the subject; the abstract does not name the SDK or API the workflow is built with. A TechEd 2026 hands-on session (Thursday 29 October, Berlin), presented by Eliott Kalfon, Janick Zaehringer-Frasch, Johannes Hoehne, Katharina Schell, Nilay Mehta and Sherene Tan, written here from SAP's abstract; no recording is announced.
RAG on CDSUnmapped
Building agentic applications with SAP HANA CloudBuilding agentic applications with SAP HANA CloudA CAP application extended with semantic search and agent features on top of SAP HANA Cloud's vector engine and SAP AI Core, built in a hands-on workshop. The abstract names the parts, CAP, the vector engine and AI Core, and the two additions: semantic search, the retrieval half of retrieval-augmented generation, and LLM-supported agent capabilities inside the application, which is agent tooling. Which embedding model, which CAP runtime and how the agent calls its tools are not stated. A TechEd 2026 session (Thursday 29 October, Berlin), presented by Hui Li, Ritty Joseph, Shraddha Shetty and Tanuja Jadhav, written here from SAP's abstract; the recording is not yet published.
HANA Cloud’s VECTOR EMBEDDING in CAP and Comparison with OpenAI EmbeddingHANA Cloud’s VECTOR EMBEDDING in CAP and Comparison with OpenAI EmbeddingTwo ways to produce the same embedding, run side by side: HANA Cloud's own VECTOR_EMBEDDING function against Azure OpenAI through the CAP LLM plugin. The CDS side is short — an element of type cds.Vector maps to REAL_VECTOR on deploy — so what remains is the comparison, which is the thing you cannot get from either product's documentation alone.lalitmohan, published 2025-04-09
RAG with SAP HANA Cloud Vector Engine, GenAI Hub & CAPRAG with SAP HANA Cloud Vector Engine, GenAI Hub & CAPThe end-to-end version: a CAP service exposing the vector engine and the AI hub behind a couple of endpoints, answering where a CodeJam is on a given date. It has aged in a way the author has marked in the page itself — the section on the CAP LLM plugin now carries "(Outdated)" in its own heading — so read the embedding preparation and the retrieval shape, and check the plugin part against the package.KevinR, published 2024-05-21
Using HANA Cloud’s "VECTOR_EMBEDDING" Function in CAPUsing HANA Cloud’s "VECTOR_EMBEDDING" Function in CAPEmbeddings generated inside the database rather than fetched from AI Core or an external model — a Q4 2024 HANA Cloud function, used from CAP. The shift it describes is where the embedding step lives, which changes what has to be deployed and what has to be called.published 2025-03-02
Tool governanceUnmapped
A Clearer View of Your SAP Integrations Under the New API PolicyA Clearer View of Your SAP Integrations Under the New API PolicyThe SAP API Policy Evidence Skill assesses one SAP interface or usage pattern at a time against SAP API Policy v.4.2026a, reading evidence from five MCP servers, among them servers for the Business Accelerator Hub and SAP Notes, mcp-sap-docs and a read-only ARC-1, and returns one of four labels with a confidence level, an evidence table, residual risk and questions for SAP. It gives no compliant or not compliant answer on purpose, because SAP's FAQ (Q49) declines to publish a binding decision matrix, and it sends legal, commercial and roadmap questions to SAP and lowers its confidence when a source is not connected. Four sample runs show the method, among them ODP-RFC extraction labelled likely not aligned under SAP Note 3255746 and the same API_SALES_ORDER_SRV assessed differently for an autonomous agent behind a custom gateway and for a Boomi middleware flow; the SAP Notes and Business Accelerator Hub servers read SAP sites through a browser login, which the post says to use at your own risk.published 2026-06-02
Audit loggingSAP only
How to implement SAP BTP Audit log service in a CAP ApplicationHow to implement SAP BTP Audit log service in a CAP ApplicationThe setup half: binding the BTP Audit Log service to a CAP application and getting the annotated path working, which is the step before anything custom becomes a question.KrishnaSharma7, published 2025-01-01
How to implement SAP BTP Audit log service in a CAP Application
@cap-js/audit-logging has been through 2 major lines since this was published: 0.9 (2025-06), 1 (2025-07). Affects A recipe.
Implementing Custom Audit Logging in SAP CAP ApplicationsImplementing Custom Audit Logging in SAP CAP ApplicationsWhere the annotations stop. CAP logs personal-data operations automatically once a model is annotated; this is about the events that are not that — an unauthorised access attempt, a business action somebody wants a trail for — and what writing those yourself involves.gopalanand, published 2025-10-09
AuthenticationSAP only
Securing CAP Applications with SAP Cloud Identity Services and AMSSecuring CAP Applications with SAP Cloud Identity Services and AMSIdentity Authentication and AMS together as the current answer for a CAP application — authentication, single sign-on and the identity lifecycle on one side, policies on the other.gopalanand, published 2025-12-04
Use Free Tier to Subscribe to SAP Document AI Basic UIUse Free Tier to Subscribe to SAP Document AI Basic UIEight steps from an entitled subaccount to the SAP Document AI basic UI open in a browser, and most of them are identity work rather than document work: getting a tenant for Cloud Identity Services, which the basic UI requires, activating the account and establishing trust with the subaccount, then subscribing, creating a user and assigning the Document_Information_Extraction_UI_Templates_Admin role collection. Using the UI to read a document is the subject of Use Machine Learning to Extract Information from Documents with the SAP Document AI Basic UI, which this tutorial names as what to read next.
AuthorizationSAP only
Dynamic authorisation with user attributes in SAP CAP and AMSDynamic authorisation with user attributes in SAP CAP and AMSThe same argument as the XSUAA-to-AMS piece, opened from a concrete failure: an acquisition puts 500 users on sales data restricted by division, and role-based access control answers it with Sales_Manager_EMEA, Sales_Manager_APAC and so on until the roles multiply past managing. Attribute-based authorisation replaces the set with one policy carrying a restriction, and the post walks through defining it in AMS against Cloud Identity Services. The clearest statement of role explosion among the three AMS pieces here.pedro_iranzo, published 2026-05-04
From XSUAA to AMS: Architecting S4HANA CAP Extensions with Policy-Based AuthorizationFrom XSUAA to AMS: Architecting S4HANA CAP Extensions with Policy-Based AuthorizationWhy scope-based authorization runs out, argued from enterprise extension work rather than from the documentation: XSUAA handles roles well, but real requirements are business-context restrictions — country, company code, organisational unit — and expressing those as scopes does not scale. The migration to policy-based authorization is presented as an architectural move for S/4HANA extensions rather than a configuration change.Avinash Vaidya, published 2026-05-27
How to Restrict CRUD Operations in SAP CAPM Using @Capabilities, @readonly and Test APIs with .httpHow to Restrict CRUD Operations in SAP CAPM Using @Capabilities, @readonly and Test APIs with .httpEntities are exposed with full CRUD by default, and this is how to take operations away again — @Capabilities for Insert, Update and Delete individually, @readonly for the blunt version. Tested with .http files rather than a UI, which keeps the check on the service.DeepaRagho, published 2026-05-22
SAP BTP XSUAA Security Configuration Comparison: Attribute-Based vs. Authority-Based ApproachesSAP BTP XSUAA Security Configuration Comparison: Attribute-Based vs. Authority-Based ApproachesTwo shapes of the same xs-security.json set against each other, with the resulting JWT printed for both. The consequence for application code is what makes it worth reading: under the attribute-based configuration a CAP handler reads req.user.attr.department, and under the authority-based one it does not, because the attribute is not there. Carries a migration guide between the two.rajeshkputumbaka, published 2026-02-18
Securing a CAP Node.js App with SAP AMS on BTP Cloud FoundrySecuring a CAP Node.js App with SAP AMS on BTP Cloud FoundryThe end-to-end version: a CAP Node.js project from cds init, role-based access through the Authorization Management Service and Identity Authentication Service, and an MTA deployment to Cloud Foundry. The prerequisite list is the useful part to read first — HANA Cloud, an IAS tenant and an AMS entitlement — because it says plainly what this path costs before you are three steps into it.Jacky Liu, published 2026-07-17
Securing CAP Applications with SAP Cloud Identity Services and AMSSecuring CAP Applications with SAP Cloud Identity Services and AMSIdentity Authentication and AMS together as the current answer for a CAP application — authentication, single sign-on and the identity lifecycle on one side, policies on the other.gopalanand, published 2025-12-04
Data privacyUnmapped
Elevating Data Privacy in SAP CAP based GenAI Applications with CAP LLM PluginElevating Data Privacy in SAP CAP based GenAI Applications with CAP LLM PluginThe question underneath the enthusiasm: what leaves your landscape when a prompt goes to a model. The plugin's answer is to anonymise the sensitive fields through HANA before the prompt is sent, and this is the post that explains why that is the design rather than an option.AkashAmarendra, published 2024-02-02
Input validationSAP only
Everything new: Try out the latest features in CAPEverything new: Try out the latest features in CAPCAP (@sap/cds) gains the features this hands-on session works through: declarative constraints, which is the input validation concern, status flows as status transition flows, a cds REPL, extensibility through @sap/cds-oyster, and HCQL, which SAP's abstract calls CAP's native query-over-HTTP protocol, after an opening stretch of AI-driven app development. The abstract names the features and stops there; what each one does is not described. A TechEd 2026 hands-on session (Wednesday 28 October, Berlin), presented by Daniel Hutzel, Daniel Schlachter, Marc Huber and Tim Back, written here from SAP's abstract; the recording is not yet published.
Extend SAP Cloud Application Programming Model(CAP) Validations with the CAPVAL PluginExtend SAP Cloud Application Programming Model(CAP) Validations with the CAPVAL PluginThe complaint first: the built-in annotations are good for data integrity and poor at telling the user what went wrong, and there is no way to reuse a rule. capval, the plugin the post announces, adds @validation.message alongside the standard annotations rather than replacing them, and @validation.handler for a check written as a class. Published in January 2024, before the 1.2.0 line the README now pairs with @sap/cds 8.0.0 and above; the two annotations it shows are the two the README still documents.published 2024-01-09
Learn how to define constraints declaratively in your CDS modelLearn how to define constraints declaratively in your CDS modelConstraints expressed in the model rather than checked in a handler — the distinction the atlas draws between input validation the framework enforces and validation somebody writes.SAP
DeploymentCommunity only
Build, Configure, and Deploy SAP CAP Projects to the CloudBuild, Configure, and Deploy SAP CAP Projects to the CloudA full CAP application with a Fiori UI taken from creation to the cloud in one post. Long, and it covers the configuration between the two that shorter guides skip.Dhanushwar, published 2025-05-20
Deploy a Full-Stack CAP Application in SAP BTPDeploy a Full-Stack CAP Application in SAP BTPFive tutorials taking the Developer's Guide application from running locally to running on BTP — preparation, the deployment itself, role assignment, and integration with Build Work Zone. Published twice, once for Cloud Foundry and once for Kyma, with the same shape and different descriptors; indexed once, because the second is the first with the runtime swapped.SAP
From Concept to action: Hands-On with the CAP Operator and the Partner Reference ApplicationFrom Concept to action: Hands-On with the CAP Operator and the Partner Reference ApplicationThe CAP Operator applied to a real application rather than a sample of its own — SAP's Partner Reference Application, taken from plugin integration through containerisation to custom resources. The transition to CRDs is the part that repays attention: it is where the deployment stops being an mta and becomes Kubernetes.ChristianWeiss, published 2026-05-21
Fullstack CAP Application with HANA Cloud (Decoupled Architecture) [Part-6]Fullstack CAP Application with HANA Cloud (Decoupled Architecture) [Part-6]The last part: the Fiori application built and deployed into the HTML5 Application Repository, separately from the service it talks to. Opens with a checklist of the five parts before it, which is the clearest statement of what the whole series covers.sanjucs, published 2026-05-14
Quickly Deploy a Sample CAP Application to BTPQuickly Deploy a Sample CAP Application to BTPPrerequisites first and at length — account, dev environment, CLI tools, MBT — because that is where a first deployment actually fails. The deploy itself is short once they are true.AminAlmarsafy, published 2025-11-15
LoggingSAP only
SAP Cloud Logging Serviceでコンテナメトリクスを監視するSAP Cloud Logging Serviceでコンテナメトリクスを監視するIn Japanese. Container metrics for a CAP Node.js application into SAP Cloud Logging Service, and the reason it exists is that the obvious route does not apply: Spring Boot Actuator covers the Java side, and Node has no equivalent, so the author reaches for Telegraf instead. The procedure is deliberately independent of application logic — bind the instance, add a startup script and a config file — so it works against an application you already have.kyoneo, published 2024-03-26
MultitenancySAP only
Building a SaaS Multitenant Application Using SAP CAP Framework — Without a DatabaseBuilding a SaaS Multitenant Application Using SAP CAP Framework — Without a DatabaseMultitenancy with the database taken out, which is a useful way to see what is left: the approuter and its tenant host pattern, the XSUAA instance in shared tenant mode, and the SaaS Registry binding that makes a subscription happen. Everything here is subscription lifecycle and routing, so the parts that are usually entangled with HDI container provisioning are visible on their own.DebashishDas, published 2026-05-06
Developing CAP java/node.js mixed mono Multitenant SaaS Applications with Shared DatabaseDeveloping CAP java/node.js mixed mono Multitenant SaaS Applications with Shared DatabaseTwo CAP projects, one Java and one Node.js, in one npm workspace sharing a single tenant database. The interesting part is which sidecar wins: both sub-projects get an MTX sidecar, both have cds.xt.SaasProvisioningService switched off, and a third onboarding project keeps provisioning to itself. Configuration listings rather than prose, and it assumes you already know why you would want this.xuelong, published 2025-01-08
Developing CAP java/node.js mixed mono Multitenant SaaS Applications with Shared Database
@sap/cds-mtxs has been through 2 major lines since this was published: 3 (2025-06), 4 (2026-06). Affects A recipe, Runnable code.
From Concept to action: Hands-On with the CAP Operator and the Partner Reference ApplicationFrom Concept to action: Hands-On with the CAP Operator and the Partner Reference ApplicationThe CAP Operator applied to a real application rather than a sample of its own — SAP's Partner Reference Application, taken from plugin integration through containerisation to custom resources. The transition to CRDs is the part that repays attention: it is where the deployment stops being an mta and becomes Kubernetes.ChristianWeiss, published 2026-05-21
Multitenant SaaS applications on SAP BTP using CAP - The Reloaded Version!Multitenant SaaS applications on SAP BTP using CAP - The Reloaded Version!An announcement rather than a tutorial, and it is the one that changes how the rest of the series should be read: the Cloud Foundry and Kyma code lines and their documentation were merged into a single sample, so the runtime becomes a choice inside one repository instead of a fork in the reading path.martinfrick, published 2023-08-09
TelemetrySAP only
SAP Cloud Logging Serviceでコンテナメトリクスを監視するSAP Cloud Logging Serviceでコンテナメトリクスを監視するIn Japanese. Container metrics for a CAP Node.js application into SAP Cloud Logging Service, and the reason it exists is that the obvious route does not apply: Spring Boot Actuator covers the Java side, and Node has no equivalent, so the author reaches for Telegraf instead. The procedure is deliberately independent of application logic — bind the instance, add a startup script and a config file — so it works against an application you already have.kyoneo, published 2024-03-26
CI/CD pipelinesSAP only
Get Started with an SAP Cloud Application Programming Model Project in SAP Continuous Integration and DeliveryGet Started with an SAP Cloud Application Programming Model Project in SAP Continuous Integration and DeliveryWiring a CAP project into SAP's hosted CI/CD service, which is the pipeline you get without assembling one.SAP
DebuggingSAP and community
debug a CAP app with UI5 TypeScript UI component with VS Codedebug a CAP app with UI5 TypeScript UI component with VS CodeDebugging both runtimes at once — the CAP server and a UI5 component written in TypeScript, the latter stepped through in its own sources rather than in the transpiled output. Written when TypeScript for UI5 had just become possible, and the combination it sets up is the one CAP's app folder invites.published 2021-11-16
Get an introduction to the cds REPLGet an introduction to the cds REPLcds repl as a way to ask the running model questions directly, which is the fastest route from a suspicion about a query to knowing.SAP
LintingCommunity only
Introducing eslint-plugin-better-cap-config an ESLint plugin to improve CAP configurationIntroducing eslint-plugin-better-cap-config an ESLint plugin to improve CAP configurationThe author's own announcement, and precise about scope: today it catches deprecated key/value entries in CAP's JSON configuration, and the ambition is that it grows into best practices, suggestions and autofixes the way any ESLint plugin does. The implementation detail worth knowing is that it uses modern ESLint's JSON language support rather than a generic parser, which is what makes linting a configuration file rather than source code work at all.published 2025-09-08
Local developmentSAP only
A Fiori Launchpad Sandbox for all your CAP-based projects - OverviewA Fiori Launchpad Sandbox for all your CAP-based projects - OverviewWhere cds-launchpad-plugin came from, told as a learning exercise: the author wanted a real problem to teach himself TypeScript on, and picked the thing he kept redoing in every CAP project — a launchpad to see all the UI applications in one place. The origin post for an entry whose 2023 update is also indexed here.published 2022-03-14
A Fiori Launchpad Sandbox for all your CAP-based projects – Sample project setupA Fiori Launchpad Sandbox for all your CAP-based projects – Sample project setupThe hands-on half published the same day as the overview: the launchpad module wired into the CAP sample repository, step by step from a global cds-dk install. Same-day pairs like this are worth keeping together — the overview argues, this one is the thing you follow.published 2022-03-14
cds-launchpad-plugin supercharged & ready for the future - CAP Plugin, UI5 Tooling support & Async Launchpadcds-launchpad-plugin supercharged & ready for the future - CAP Plugin, UI5 Tooling support & Async LaunchpadThe maintainer on a set of changes rather than on the plugin's original purpose, which is indexing every SAPUI5 project in a workspace into one sandbox launchpad so all of them can be tested together. What moved: it became a CAP plugin, gained UI5 Tooling support, and moved to the async launchpad — each framed as keeping pace with where SAPUI5 itself is going rather than as a feature.published 2023-12-11
Create a Simple CAP Application and Explore the DefaultsCreate a Simple CAP Application and Explore the DefaultsThe shortest way in: a project from the wizard, then a look at what CAP assumed on your behalf. The defaults are the subject rather than the application — which is the right first lesson in a framework whose whole argument is convention over configuration.SAP
Establishing connectivity between a local CAP runtime and on-premise systemsEstablishing connectivity between a local CAP runtime and on-premise systemsReaching S/4HANA, an on-premise HANA or any HTTP service from a CAP process running on your laptop — the case where the connectivity proxy the platform provides is not there and the tunnel has to be arranged.vLeonkev, published 2025-10-15
Get an introduction to the cds REPLGet an introduction to the cds REPLcds repl as a way to ask the running model questions directly, which is the fastest route from a suspicion about a query to knowing.SAP
How to Call a Remote OData API from Your Local CAP Java ProjectHow to Call a Remote OData API from Your Local CAP Java ProjectThe Business Accelerator Hub sandbox called from a CAP Java project on a laptop, with a concrete finish line — a localhost URL that returns business partners. Everything needed to get there is listed, Maven and JDK versions included.Umezuki, published 2025-08-11
Remote Debugging of SAP CAPM App - NodejsRemote Debugging of SAP CAPM App - NodejsDebugging a CAP Node.js application that is not on your machine, built up from cds init and a custom action so there is something to breakpoint. The part people need is at the end; the beginning is there so the end is reproducible.darshanv23, published 2025-06-05
SAP Tech Bytes: Using the SAP Approuter at dev time - a full-stack journey with UI5 and CAPSAP Tech Bytes: Using the SAP Approuter at dev time - a full-stack journey with UI5 and CAPGetting UI5 Tooling and the CAP server onto one port under one command, using cds-plugin-ui5 — which the post presents as the thing that removes the proxy and destination configuration a full-stack dev setup otherwise needs. Part one of a journey that goes on to put the approuter in front at development time.published 2023-10-13
SAP Tech Bytes: Using the SAP Approuter at dev time - a full-stack journey with UI5 and CAP
cds-plugin-ui5 has been through 11 major lines since this was published, most recently 0.15 (2025-11), 0.16 (2025-12), 0.17 (2026-03). Affects Runnable code.
Set up a self-contained development environment for CAP Node.jsSet up a self-contained development environment for CAP Node.jsA CAP development environment that carries its own dependencies, so the machine it runs on stops being part of the setup.SAP
Plugin authoringSAP only
Reusable components for CAP with cds-pluginReusable components for CAP with cds-pluginThe post that taught the mechanism, and it teaches it by picking a requirement small enough to be absurd: every string a service returns should end in a random emoji. Working through that on the bookshop example leaves nothing to argue about except the plumbing, which is the point — what a cds-plugin is, where it hooks in, and why packaging it beats copying it into the next project. Vinícius Barrionuevo credits this post as the thing that gave him the idea for sap-cap-sdm-plugin, and it is hard to read the plugin ecosystem in this graph without it.published 2023-04-30
Seed dataCommunity only
Avoiding Data Loss When Loading Initial Data with CSV Files in CAPAvoiding Data Loss When Loading Initial Data with CSV Files in CAPcds add tiny-sample gives you a CSV in db/data and it loads on deploy, which looks like a way to seed a productive application. The catch, stated plainly: change the CSV or the schema and HANA is reinitialised from the file, taking whatever users had entered with it.MioYasutake, published 2025-09-15
Handling CSV Data Deployment in CAP HDI Without Data LossHandling CSV Data Deployment in CAP HDI Without Data LossThe same trap from the HDI side: .hdbtabledata hands the container full ownership of the data, so the next deployment overwrites the table from the file. Two independent posts three months apart on the same sharp edge, which is a fair signal about how sharp it is.Sekar_Somasundaram, published 2025-06-04
TestingSAP and community
Create Automated System Tests for SAP Cloud Application Programming Model ProjectsCreate Automated System Tests for SAP Cloud Application Programming Model ProjectsEnd-to-end tests driving the UI with wdi5, run in the pipeline — the layer above cds.test, which stops at the service boundary.SAP
How to Restrict CRUD Operations in SAP CAPM Using @Capabilities, @readonly and Test APIs with .httpHow to Restrict CRUD Operations in SAP CAPM Using @Capabilities, @readonly and Test APIs with .httpEntities are exposed with full CRUD by default, and this is how to take operations away again — @Capabilities for Insert, Update and Delete individually, @readonly for the blunt version. Tested with .http files rather than a UI, which keeps the check on the service.DeepaRagho, published 2026-05-22
TypeScript patternsDoes not apply
CDS-TS-Dispatcher: Simplifying SAP CAP TypeScript DevelopmentCDS-TS-Dispatcher: Simplifying SAP CAP TypeScript DevelopmentThe first of a pair introducing the author's own libraries, and it states what it is reacting to: CAP derives OData services from a CDS model, but the communication between business logic, service and persistence layers is left to you, and the earlier attempt at the service-layer half, cds-routing-handler, appeared unmaintained against newer CAP. The dispatcher is the answer offered for that layer.published 2023-11-13
CDS-TS-Dispatcher: Simplifying SAP CAP TypeScript Development
@dxfrontier/cds-ts-dispatcher has been through 6 major lines since this was published, most recently 4 (2025-01), 5 (2025-07), 6 (2026-07). Affects Runnable code.
CDS-TS-Repository: Simplify SAP CAP Entity persistance with BaseRepositoryCDS-TS-Repository: Simplify SAP CAP Entity persistance with BaseRepositoryThe persistence half of the same pair, three days later: a BaseRepository putting entity access behind a typed repository rather than CQN written inline in a handler. Shares its opening argument with the dispatcher post — the layer between business logic and persistence is the part CAP leaves open — and the two are designed to be used together.published 2023-11-16
CDS-TS-Repository: Simplify SAP CAP Entity persistance with BaseRepository
@dxfrontier/cds-ts-repository has been through 9 major lines since this was published, most recently 5 (2024-12), 6 (2025-07), 7 (2026-07). Affects Runnable code.
Quick Implementation of DI/DI Container on SAP CAP: Node.js Hands-on PartQuick Implementation of DI/DI Container on SAP CAP: Node.js Hands-on PartThe hands-on half of a pair — the theory is in the author's earlier post — built on the official bookshop sample with the directories flattened so the pattern is visible rather than the scaffolding. Assumes CAP and TypeScript already.Umezuki, published 2025-05-02
SAP CAP: Controller - Service - Repository architectureSAP CAP: Controller - Service - Repository architectureThe pattern the author's two libraries exist to support, set out as a whole rather than one package at a time: a controller layer receiving the request, a service layer holding business logic, and a repository layer owning persistence — the separation CAP leaves to the developer once a model has produced an OData service. Read after the dispatcher and repository posts, or before them as the argument for both.published 2024-04-22
SAP CAP: Controller - Service - Repository architecture
@dxfrontier/cds-ts-dispatcher has been through 4 major lines since this was published, most recently 4 (2025-01), 5 (2025-07), 6 (2026-07). Affects Runnable code.
Use TypeScript with the SAP Cloud Application Programming ModelUse TypeScript with the SAP Cloud Application Programming ModelWritten from the position of someone who avoided JavaScript for years and then had to cover CAP, which gives it a useful angle: what TypeScript buys a person arriving from a typed language, and where to start rather than how to finish. Ends on a worked example rather than a survey.KevinR, published 2024-06-24
TypingSAP only
Exploring the TypeScript Ecosystem with @cap-js/cds-typer, cds-ts, and node-tsExploring the TypeScript Ecosystem with @cap-js/cds-typer, cds-ts, and node-tsPart one of two: a bookshop project built in TypeScript from cds init, with cds-typer added as a development dependency and the surrounding tools — cds-ts and node-ts — put in place so the project runs locally. A setup walkthrough rather than an argument about typing, and it stops at the point where the application works on a laptop; deployment is part two.satya-dev, published 2024-07-08
Exploring the TypeScript Ecosystem with @cap-js/cds-typer, cds-ts, and node-ts
@cap-js/cds-typer has been through 18 major lines since this was published, most recently 0.39 (2026-05), 0.40 (2026-06), 0.41 (2026-08). Affects A recipe, Runnable code.
Exploring the TypeScript Ecosystem with @cap-js/cds-typer, cds-ts, and node-ts Part - 2Exploring the TypeScript Ecosystem with @cap-js/cds-typer, cds-ts, and node-ts Part - 2Part two takes the TypeScript project from part one to Cloud Foundry: cds add mta, then the parts of the generated descriptor the author singles out as needing attention for a TypeScript build rather than a JavaScript one. The pair together is the whole path — typed model locally, then deployed — which is where a typing walkthrough usually stops short.satya-dev, published 2024-07-19
Exploring the TypeScript Ecosystem with @cap-js/cds-typer, cds-ts, and node-ts Part - 2
@cap-js/cds-typer has been through 17 major lines since this was published, most recently 0.39 (2026-05), 0.40 (2026-06), 0.41 (2026-08). Affects Runnable code.
Draft handlingSAP only
Custom Handlers for Entities in SAP CAPCustom Handlers for Entities in SAP CAPWritten from the moment of not knowing: a two-level composition with drafts, the Fiori elements UI working perfectly, and no idea which handlers are actually needed. What comes out is the action lifecycle laid out as a reference — NEW, EDIT, PATCH and the rest — with a matrix saying which handler fires for which, which is the thing the documentation leaves you to assemble.xavisanse, published 2026-02-20
How to ensure that users can efficiently enter data in SAP Fiori elements applicationsHow to ensure that users can efficiently enter data in SAP Fiori elements applicationsGuidance for draft-enabled Fiori Elements applications aimed at the user who spends their day in them: entering data quickly and by keyboard, on a slow network, without the round trips a draft-backed form can otherwise impose. Written from the design side rather than the implementation side, which is the half most CAP writing about drafts leaves out.published 2022-12-05
Fiori annotationsSAP only
Deep Insert in SAP CAPM Using Composition and Fiori ElementsDeep Insert in SAP CAPM Using Composition and Fiori ElementsParent and children created in one transaction, which composition already gives you in the model — the post is about what Fiori elements does with it, and what the payload looks like when the UI sends both at once.published 2026-05-22
Develop a Full-Stack CAP Application Following SAP BTP Developer's GuideDevelop a Full-Stack CAP Application Following SAP BTP Developer's GuideThe eight-part path SAP's own Developer's Guide prescribes: a CAP service, Fiori Elements over it, custom logic, authorization, tests, and the preparation deployment needs. It is the closest thing to an official answer to 'what does a whole CAP application look like', which is why it sits under reference applications rather than under any one of the capabilities it touches.SAP
Dynamic Criticality in SAP CAP Using Fiori Elements and Node.jsDynamic Criticality in SAP CAP Using Fiori Elements and Node.jsColouring rows by status, which sounds like a UI question and is not: criticality is a value the service has to compute and expose, so the work is a virtual element in CDS and the annotation that points at it. Comes from a real requirement — business users wanting to spot the records that need attention.Pranesh_SD, published 2026-06-05
From SEGW and Legacy UI5 to RAP with ARC-1From SEGW and Legacy UI5 to RAP with ARC-1Three ARC-1 skills, run in Cursor with Composer-2 against a deliberately rough demo on an S/4HANA 2023 trial system, turn the SEGW service ZDEMO_MIG_PROJECTS_SRV into a managed, draft-enabled RAP business object published as OData V4, replace its ApproveProject function import and its direct UPDATE ... COMMIT WORK with the action approve_project written in EML in local mode, and rebuild the freestyle UI5 JavaScript app once in UI5 TypeScript and once as a Fiori elements list report and object page driven by metadata extensions. What the published transcripts add is how the agent got there: it found the generated MPC class names and the custom logic in DPC_EXT only by reading the system, the skills made it print the extracted model and stop for confirmation before writing, and @ui5/mcp-server, mcp-sap-docs and @sap-ux/fiori-mcp-server each had their own job beside it. The demo is small on purpose, and the post says a productive SEGW service that calls BAPIs, carries custom authorisation logic or supports deep inserts is not solved with one prompt.published 2026-05-11
From SEGW and Legacy UI5 to RAP with ARC-1
@sap-ux/fiori-mcp-server has been through 2 major lines since this was published: 0.7 (2026-05), 1 (2026-05). Affects Runnable code.
Fullstack CAP Application with HANA Cloud (Decoupled Architecture) [Part-2]Fullstack CAP Application with HANA Cloud (Decoupled Architecture) [Part-2]Part 1 left a working OData service whose Fiori preview showed nothing useful. This is the annotations that fix that — the UI vocabulary added to the CDS model until the generated list report has columns worth reading.sanjucs, published 2026-05-07
Frontend boundaryUnmapped
CAP, CORS and custom headersCAP, CORS and custom headersWhat CAP itself does about CORS, and where it stops. The starting point is a colleague's request and a deliberate constraint: @sap/approuter has full CORS support, but the author wanted to know what the CAP server offers on its own and how to extend it. Ends up covering preflight requests and custom servers, which is the mechanism a frontend hosted outside BTP actually runs into.published 2024-04-11
Status flowsSAP only
Everything new: Try out the latest features in CAPEverything new: Try out the latest features in CAPCAP (@sap/cds) gains the features this hands-on session works through: declarative constraints, which is the input validation concern, status flows as status transition flows, a cds REPL, extensibility through @sap/cds-oyster, and HCQL, which SAP's abstract calls CAP's native query-over-HTTP protocol, after an opening stretch of AI-driven app development. The abstract names the features and stops there; what each one does is not described. A TechEd 2026 hands-on session (Wednesday 28 October, Berlin), presented by Daniel Hutzel, Daniel Schlachter, Marc Huber and Tim Back, written here from SAP's abstract; the recording is not yet published.