Everything in CAP / Java
172 of 738
Domain
Signals
Content: 2
Java: Answers in Java
More: 2
Group by: Capability
EntryBySignalsLast activity
Error handlingSAP only
Beginners Guide to Advanced Event MeshBeginners Guide to Advanced Event MeshA scenario-by-scenario walkthrough of Advanced Event Mesh, run through Cloud Integration iFlows: publishing and consuming queue messages, dead message queue setup with retry counts and acknowledgment modes, direct messages, durable topic endpoints and selectors, time-to-live, REST Delivery Points, replay by replication group message ID, parallel consumers with partition keys, and the request-reply pattern. Each scenario is built and verified step by step against a Solace trial account standing in for AEM.PriyankaChak, published 2025-07-24
Effective Axios Error Logging for Robust SAP IntegrationsEffective Axios Error Logging for Robust SAP IntegrationsTwo logged failures printed side by side, and the point is made by looking at them: one tells you what went wrong and one does not. Axios buries the useful part of an HTTP error, and this is what to unwrap before logging it from a CAP service.Sahil2508, published 2025-08-31
GraphQLUnmapped
CAP: GraphQL as new protocolCAP: GraphQL as new protocolWritten days after @cap-js/graphql appeared, by somebody who went looking for it — an introduction to GraphQL alongside what the adapter actually does to a CAP service. The first outside account of the capability, and still one of very few.jhodel18, published 2023-03-18
CAP: GraphQL as new protocol
@cap-js/graphql has been through 11 major lines since this was published, most recently 0.12 (2025-05), 0.13 (2025-07), 0.14 (2025-10). Affects Runnable code.
SAP CAPv7 - Node.js Highlights and ExperiencesSAP CAPv7 - Node.js Highlights and ExperiencesAn account of upgrading a 100+ table CAP Node.js project from v6 to v7, working through breaking changes in @sap/cds 7: event handlers now always receive an array, service paths move under /odata/v4/... unless serve_on_root is set, and cds-serve replaces cds run. It goes deepest on the GraphQL plugin, @cap-js/graphql: the /graphql endpoint it serves, Composition results wrapped in a nodes connection, and offset-based pagination reached through OData's top and skip rather than GraphQL's own limit and offset.published 2023-08-03
ODataSAP and community
#BTP #SAPCAP: Quirky Nuggets (N03-N04)#BTP #SAPCAP: Quirky Nuggets (N03-N04)Two unrelated findings in one post, which is the format of the series: the OData operators tried against a CAP service — with a schema of deliberately awkward types to try them on — and undeploying database artifacts, which is the half people hit in anger. Numbered N03 and N04 of a run that continues either side.Ajit_K_Panda, published 2023-06-05
#BTP #SAPCAP: Quirky Nuggets (N03-N04)
Deployment changed in @sap/cds-dk 8.9.0, 2025-03-31. Affects A recipe, Runnable code.
Create CDS Views and expose through OData service in CAPMCreate CDS Views and expose through OData service in CAPMViews defined in CDS and then exposed, which is the whole of what a small CAP service is. Written step by step from cds init onward in Business Application Studio.VenkateshMundru, published 2025-08-11
How to Perform Initial Loads from S/4HANA to Advanced Event Mesh with Odata PollHow to Perform Initial Loads from S/4HANA to Advanced Event Mesh with Odata PollWalks through building a Cloud Integration flow that polls the S/4HANA Business Partner OData API on a timer, splits the response into individual records, and publishes each as an event to Advanced Event Mesh through its adapter, with the topic set dynamically from a grouping property. Selects fields and expands associations with $select/$expand against an EDMX from the API Business Hub, and works around the OData V2 adapter's lack of JSON support by falling back to the HTTP adapter with an XML-to-JSON converter. Flags the trade-off: the pattern needs no backend change beyond activating the API, but the polled payload has to stay aligned with whatever event format the ERP pushes on change.AlexPfeil, published 2025-04-04
The Complete Guide to Calling Actions in UI5 with Custom CodeThe Complete Guide to Calling Actions in UI5 with Custom CodeWritten because the documentation is thin and the samples sparse, and openly as a note to the author's future self — hand-coding an action call has become a rare task for anyone mostly working in Fiori elements, which is exactly why it is hard to look up when it comes round. Comes with a CAP sample project, so the service half is there too.published 2025-07-21
OpenAPIUnmapped
Edge Integration Cell : Design, deploy and manage APIsEdge Integration Cell : Design, deploy and manage APIsWalks through creating an API artifact in API Management on the customer-managed Edge Integration Cell runtime, including the option to generate the artifact by importing an OpenAPI specification rather than from a URL or by hand. It then attaches an Authentication policy and a Quota step capped at four calls per minute, deploys, and shows both the resulting 401 and the quota-breach error in the Monitor logs. The author frames it as the first of a series on Edge Integration Cell's policies.published 2023-11-15
Part 2 – Empowering SAP BTP CAP Services through Open API Spec and Annotations for Effective Communication, Collaboration and GovernancePart 2 – Empowering SAP BTP CAP Services through Open API Spec and Annotations for Effective Communication, Collaboration and GovernanceWalks through generating an OpenAPI specification for a Node.js CAP service: installing cds-swagger-ui-express, bootstrapping it in server.js, a sample CDS data model with associations and compositions, and the YUML diagram and endpoint details the Open API Preview renders in Business Application Studio. Also shows gating the Swagger UI behind a user-defined environment variable so it is served in development and QA subaccounts but excluded from the production deployment on Cloud Foundry. Second of a three-part series; the first covers the concepts and the third goes deeper into annotations.mohit_bansal3, published 2023-05-24
Pagination and streamingSAP only
[Part – 2] Enrich CAP based Services with Behaviors using Annotations[Part – 2] Enrich CAP based Services with Behaviors using AnnotationsThe second half of a two-part walkthrough of CAP's behavioral annotations, following on from access control and input validation in the first part. This post works through @cds.autoexpose, @cds.api.ignore, @cds.persistence.exists/skip, @cds.on.insert/@cds.on.update and the @odata.Type/@odata.singleton mapping overrides, all shaping how a CDS model is projected into a service, which is data modelling. Alongside these it covers @cds.query.limit for default and maximum page sizes (pagination and streaming), @odata.etag with exclusive and shared locks for optimistic concurrency (concurrency control), and @cds.search for scoping $search to chosen elements (search), each with a CDS code example.published 2023-01-29
WebSocketUnmapped
A Practical Real-Time CTI Widget for SAP Sales Cloud V2A Practical Real-Time CTI Widget for SAP Sales Cloud V2A small CAP backend, a WebSocket channel and a UI5 widget in an iframe — enough to get telephony events into Sales Cloud without any custom backend inside the CRM. The smallness is the design.gizemsoylutr, published 2025-11-28
Communicate from a Java Application to ABAP via WebSocket RFC using JCo - Migration GuideCommunicate from a Java Application to ABAP via WebSocket RFC using JCo - Migration GuideWalks a JCo setup from classic CPIC-based RFC to WebSocket RFC: swap the application- or message-server logon properties for jco.client.wshost and jco.client.wsport, and implement DestinationDataProvider's getSSLContext (and, for mTLS, getClientCertificate) since the new connection runs over TLS. It covers building the PKI trust on both sides — a local PKCS12 keystore for the Java side, STRUST's SSL-Server Standard certificate exported and imported for mutual trust on the ABAP side — and notes that on BTP, JCo paired with the Destination service already implements this via the Connectivity service, so the custom SSLContext work can be skipped there.simon_luser, published 2025-01-21
SAP Event Mesh: S4 HANA On-Prem and SAP CI(BTP IS) through WebSocket and WebhooksSAP Event Mesh: S4 HANA On-Prem and SAP CI(BTP IS) through WebSocket and WebhooksA step-by-step walkthrough of wiring Event Mesh to publish and consume events between an on-premise S/4HANA system and Cloud Integration, contrasting persistent queues (one subscriber, kept until consumed) against unpersisted topics, and WebSocket's AMQP transport against webhook delivery for the same queue. Two tested findings support it: a queue consumer running in continuous consumption mode receives a message ahead of a webhook on the same topic, and a message stays queued and is retried (almost 8770 times in under a minute, in the author's test) until the consumer processes it successfully.FarooqAhmed, published 2023-10-03
Streaming LLM Output with CAP and WebSocketsStreaming LLM Output with CAP and WebSocketsTokens arriving from the AI SDK's orchestration module, forwarded to the browser as they come rather than after the model finishes. Covers all four pieces — enabling WebSocket support in CAP, a service with actions and events, the streaming itself, and a frontend on the native WebSocket API — which is what makes it the clearest case for why a CAP service would want a socket at all.RobinP, published 2025-11-18
Streaming LLM Output with CAP and WebSockets
LLM integration changed in @cap-js/ai 1.0.0, 2026-04-28. Affects A recipe, Runnable code.
Analytical queriesUnmapped
Building an Analytical List Page with CAP OData V4Building an Analytical List Page with CAP OData V4The annotations a CAP OData V4 service needs before an Analytical List Page will render — the write-up behind the cap-alp sample indexed here. Candid about its provenance: the author credits a GitHub repository she found the approach in, and notes that the repository is no longer available, which is the whole argument for indexing the reasoning rather than only linking the code.published 2023-06-12
Building an Analytical List Page with CAP OData V4
cap-alp: no published releases, repository quiet for 24 months. Affects A recipe, Runnable code.
Empowering Your Data Analytics with GPT-3 and SAP CAP IntegrationEmpowering Your Data Analytics with GPT-3 and SAP CAP IntegrationFree text in, SQL out, answer back in a sentence — the model writes the query, CAP runs it, and the model turns the rows into prose. Written in the GPT-3 window, so the model access has dated, but the three-step shape has not, and it is a different bet from retrieval: nothing is embedded, the schema is the context.Former Member, published 2023-03-10
Fiori Elements Analytical Table with CAP: Does it work with V2 and V4?Fiori Elements Analytical Table with CAP: Does it work with V2 and V4?A question in the title and an answer in the post, with the boundary drawn carefully: this is an analytical table inside a List Report, not the Analytical List Page, and the two protocol versions do not behave the same.published 2023-04-03
Fiori Elements Analytical Table with CAP: Does it work with V2 and V4?
Fiori annotations changed in @sap/cds-dk 9.6.0, 2025-12-17. Affects Runnable code.
AttachmentsSAP only
Building an Attachment Upload and Download Solution Using UploadSetwithTable ControlBuilding an Attachment Upload and Download Solution Using UploadSetwithTable ControlThe successor control to UploadSet posts the file in one request by default, and against CAP that is wrong: the record has to be created first and the content put to it afterwards. The author states the two-step shape plainly and notes it may not apply to an ABAP backend, which is the kind of boundary that usually goes unsaid. Written during a proof of concept for a reusable attachment component, and it carries the problem they hit with the control.published 2025-03-13
How to transfer file from CAP backsideHow to transfer file from CAP backsideA PDF arriving from the front end, stored against the record with @Core.MediaType, and then sent on to an external service for parsing. Short, and the second half is the part that is not in the plugin documentation: getting the bytes back out of the model to forward them somewhere else.published 2023-09-14
How to transfer file from CAP backside
Attachments has changed 3 times since this was published, most recently in @cap-js/sdm 1.0.0, 2024-06-26. Affects Runnable code.
Major updates to the Attachments plugin – multi-cloud support, malware scanning and moreMajor updates to the Attachments plugin – multi-cloud support, malware scanning and moreMulti-cloud storage and malware scanning added to the official plugin, framed through CAP's Calesi pattern — the argument being that a service interface is what lets the storage underneath change without the application noticing. The post that a triage bug hid: "attachment" had stopped matching "Attachments".published 2025-12-02
Major updates to the Attachments plugin – multi-cloud support, malware scanning and more
@cap-js/attachments 3.4.0, now 4.0.0, com.sap.cds:cds-feature-attachments 1.2.2. Affects A recipe, Runnable code.
Presenting sap-cap-sdm-plugin: Effortless Integration Between CAP (Node.js) and DMSPresenting sap-cap-sdm-plugin: Effortless Integration Between CAP (Node.js) and DMSThe author's introduction of the plugin, and unusually clear about its lineage: the idea came from a post about cds.plugins whose example did nothing more than append an emoji to annotated properties, and the groundwork was an earlier library, sap-cloud-cmis-client, that this builds on. Worth reading for how a plugin gets conceived as much as for what it does with Document Management Service.published 2023-10-02
Presenting sap-cap-sdm-plugin: Effortless Integration Between CAP (Node.js) and DMS
sap-cap-sdm-plugin is archived. Its last release was 2024-03-24. Affects Runnable code.
Upload attachments in a Freestyle UI5 and CAP appUpload attachments in a Freestyle UI5 and CAP appAttachments where the UI is freestyle rather than Fiori elements, so none of the generated upload behaviour applies and both ends have to be written.published 2023-12-19
Uploading attachment with cap-js/attachment plugins but via External App/PostmanUploading attachment with cap-js/attachment plugins but via External App/PostmanThe plugin is written for a Fiori elements front end; this is the case where the caller is neither — Postman and a React app. Short, and it exists because the request shape is not obvious from outside the generated UI: what to POST, what to PUT, and in which order.published 2025-07-24
Use SAP Document Management Service Plugin In CAP NODEJS Step by Step GuidanceUse SAP Document Management Service Plugin In CAP NODEJS Step by Step GuidanceThe official plugin is documented in capire; this is somebody who set it up anyway and wrote down where it went wrong. The author says as much — the point is to spare customers the troubles, so the value is in the order of the steps and the prerequisites, not in the API.Jacky_Liu1, published 2025-03-06
CachingUnmapped
Performance Boost and Caching Strategy for Faster Data Access using "cds-caching" in SAP CAPPerformance Boost and Caching Strategy for Faster Data Access using "cds-caching" in SAP CAPSomebody else's account of using the plugin, which is the useful counterpart to its documentation. The case is specific: a master-data entity of more than a million rows, rarely written and constantly read, where the read-heavy shape is what makes caching worth the complexity rather than a general performance wish. Walks through integrating cds-caching into that application and what it changed.NaveenChandar, published 2025-03-04
Performance Boost and Caching Strategy for Faster Data Access using "cds-caching" in SAP CAP
cds-caching has been through 4 major lines since this was published, most recently 1 (2025-07), 2 (2026-07), 3 (2026-08). Affects A recipe, Runnable code.
Concurrency controlSAP only
[Part – 2] Enrich CAP based Services with Behaviors using Annotations[Part – 2] Enrich CAP based Services with Behaviors using AnnotationsThe second half of a two-part walkthrough of CAP's behavioral annotations, following on from access control and input validation in the first part. This post works through @cds.autoexpose, @cds.api.ignore, @cds.persistence.exists/skip, @cds.on.insert/@cds.on.update and the @odata.Type/@odata.singleton mapping overrides, all shaping how a CDS model is projected into a service, which is data modelling. Alongside these it covers @cds.query.limit for default and maximum page sizes (pagination and streaming), @odata.etag with exclusive and shared locks for optimistic concurrency (concurrency control), and @cds.search for scoping $search to chosen elements (search), each with a CDS code example.published 2023-01-29
Data modellingSAP only
#CAP-TechBytes Input Validation#CAP-TechBytes Input ValidationThe annotations one at a time — @mandatory, @assert.unique, @assert.range including the enum form, @assert.format — each with what it produces. Ends on error handling, which is the part that decides whether any of it is usable from a UI.Thajunniza, published 2023-07-07
A CAP Plugin for Flexible Number Range Management: cds-numberrange-pluginA CAP Plugin for Flexible Number Range Management: cds-numberrange-pluginThe author's own plugin, and the reason given for writing it is about plugins rather than about number ranges: a year of using them convinced them that this was the way to extend CAP without leaving marks on the application. Sequential document numbers are the thing it does; keeping the host project clean is the thing it argues for.abdulbasit, published 2025-06-17
Building an Enterprise Application Using Fiori Elements and CAP - Part 1Building an Enterprise Application Using Fiori Elements and CAP - Part 1Part one of three, and it is all backend: the CAP service the UI will sit on. The author states the constraint the series works under — simple enough for someone new to the stack, without departing from the standard project layout.Farooq, published 2025-12-10
Create CDS Views and expose through OData service in CAPMCreate CDS Views and expose through OData service in CAPMViews defined in CDS and then exposed, which is the whole of what a small CAP service is. Written step by step from cds init onward in Business Application Studio.VenkateshMundru, published 2025-08-11
Understanding Projections in CAPM: Select Only What You Need!Understanding Projections in CAPM: Select Only What You Need!One concept, explained by someone who had just learned it and says so — what a projection is, why it matters, and an analogy. The register is unusual here and suits the subject: projections are the first thing that makes CDS feel different from a table.Avisek_, published 2025-06-10
Database connectorsSAP only
Accelerating Your Analytics with Delta Table Replication into SAP HANA CloudAccelerating Your Analytics with Delta Table Replication into SAP HANA CloudStarting with QRC 04/2025, SAP HANA Cloud can replicate a Delta Lake table from an external Delta Sharing source directly into a native HANA table, rather than only querying it live through a virtual table. The post walks through creating a remote subscription, running a chunk-based initial load, and setting up change data capture on a schedule or on demand, each with the SQL statements and monitoring views involved, plus the simpler virtual-table-toggling and HANA Cloud Central UI alternatives.SeungjoonLee, published 2025-12-22
CAP PostgreSql setup local debugging using Docker - Part 2CAP PostgreSql setup local debugging using Docker - Part 2PostgreSQL in a container so the local loop matches the deployed one — the thing SQLite quietly stops you doing. Short, and it assumes the project from part one already runs.ramonlee5, published 2023-11-22
CAP PostgreSql setup local debugging using Docker - Part 2
Database connectors has changed twice since this was published, most recently in @sap/cds 10.1.0, 2026-09-07. Affects A recipe.
CAP with PostgreSQL DB alternate to HANA Cloud DB - Part 1CAP with PostgreSQL DB alternate to HANA Cloud DB - Part 1Bootstrapping a CAP project on PostgreSQL, framed as a choice that depends on the client rather than on the technology. Short, and part two is where it gets debuggable.ramonlee5, published 2023-10-10
Create a CAP Application with SAP HANA Cloud from Scratch and Deploy to Cloud FoundryCreate a CAP Application with SAP HANA Cloud from Scratch and Deploy to Cloud FoundryThe whole lifecycle in one post rather than a series — model, service, HANA binding, build, deploy. Useful as a single reference for the order things have to happen in, which is the part that is easy to get wrong when it is spread over six posts.MaheshSirsat1708, published 2025-11-19
Create a CAP Application with SAP HANA Cloud from Scratch and Deploy to Cloud Foundry
Database connectors changed in @sap/cds 10.1.0, 2026-09-07. Affects A recipe.
Creating a Hybrid CAP (Node.js) Profile with PostgreSQL on BTP from Business Application StudioCreating a Hybrid CAP (Node.js) Profile with PostgreSQL on BTP from Business Application StudioHybrid testing is documented for HANA; this is the same profile against a PostgreSQL instance on BTP, driven from a BAS dev space rather than a laptop. Proposed under editor support because of where it runs, but the subject is the binding: what cds bind writes, and what has to be true of the service instance and the tunnel for a local process to reach it.valentincadart, published 2025-10-02
Creating a Hybrid CAP (Node.js) Profile with PostgreSQL on BTP from Business Application Studio
Database connectors changed in @sap/cds 10.1.0, 2026-09-07. Affects Runnable code.
Lets Deep dive into CAPM and HANA Cloud --> HANACapLets Deep dive into CAPM and HANA Cloud --> HANACapShort, and framed as what the author does day to day on BTP rather than as a tutorial: where CAPM meets HANA Cloud and which pieces have to agree.shivamshukla12, published 2023-07-16
Lets Deep dive into CAPM and HANA Cloud --> HANACap
Database connectors has changed twice since this was published, most recently in @sap/cds 10.1.0, 2026-09-07. Affects Runnable code.
Lets Talk to the Database - CAP & SQLite Powered by Google Gemini-2.5-ProLets Talk to the Database - CAP & SQLite Powered by Google Gemini-2.5-ProNatural language against a CAP service on SQLite, with a non-SAP model doing the translation. Written as a learning exercise rather than a pattern, and the choice of Gemini over anything in the AI hub is the interesting part of it.ShivamShuklaSAP, published 2025-04-16
Open Sourcing CAP – how to learn more or get involvedOpen Sourcing CAP – how to learn more or get involvedA roundup of CAP's open-sourcing, begun at TechEd the year before, pointing to a webinar recording, a podcast episode and reCAP 2023 talks for background. Among the components it names are a feature toggle library giving Node.js CAP apps live-updatable toggles backed by Redis, a new pluggable database layer with SQLite and PostgreSQL implementations plus a generic SQL layer, and a change tracking component that builds a change history for data from CDS models.Fempel, published 2023-10-02
Run and Deploy SAP CAP (Java) with PostgreSQL on SAP BTP Cloud FoundryRun and Deploy SAP CAP (Java) with PostgreSQL on SAP BTP Cloud FoundrySuperseded by its own author: the post now opens with a notice that @sap/cds 7.0.0 brought native PostgreSQL support and that @cap-js/postgres should be used instead of the packages described below. Kept because that notice is the record of when the community adapter stopped being the answer.shanthakumar_krishnaswamy, published 2023-04-04
Run and Deploy SAP CAP (Java) with PostgreSQL on SAP BTP Cloud Foundry
cds-pg. Affects Runnable code.
Run and Deploy SAP CAP (Java) with PostgreSQL using Official Database Adapter @cap-js/postgresRun and Deploy SAP CAP (Java) with PostgreSQL using Official Database Adapter @cap-js/postgresThe post that records a handover. The author's earlier writing relied on the community projects cds-pg and cds-dbm; this one states that both were deprecated in favour of the official PostgreSQL support arriving with @sap/cds 7, and rewrites the path around @cap-js/postgres. For CAP Java it takes a different route to the initial schema.sql than the Node.js case, and it is candid that automatic schema deployment is convenient but not always what you want. Dated evidence for why two artifacts here went quiet.shanthakumar_krishnaswamy, published 2023-08-02
Run and Deploy SAP CAP (Java) with PostgreSQL using Official Database Adapter @cap-js/postgres
cds 7, line ended. Affects A recipe, Runnable code.
Run and Deploy SAP CAP (Node.js or Java) with PostgreSQL on SAP BTP Cloud FoundryRun and Deploy SAP CAP (Node.js or Java) with PostgreSQL on SAP BTP Cloud FoundryBoth runtimes in one walkthrough, and it stops on schema evolution — which is the reason to read it rather than one of the several other PostgreSQL posts here, since that is where the PostgreSQL story diverges from HANA's and the deploy stops being automatic.TiaXu, published 2023-07-12
Run and Deploy SAP CAP (Node.js or Java) with PostgreSQL on SAP BTP Cloud Foundry
Database connectors has changed twice since this was published, most recently in @sap/cds 10.1.0, 2026-09-07. Affects A recipe, Runnable code.
SAP CAP (Java) with Amazon Aurora PostgreSQLSAP CAP (Java) with Amazon Aurora PostgreSQLPostgreSQL, but the hyperscaler's own managed global database rather than BTP's option — Aurora, from CAP Java. One of a pair published the same day, the other being Azure's equivalent.shanthakumar_krishnaswamy, published 2023-08-02
SAP CAP (Java) with Amazon Aurora PostgreSQL
Database connectors has changed twice since this was published, most recently in @sap/cds 10.1.0, 2026-09-07. Affects A recipe, Runnable code.
SAP CAP (Java) with Azure Cosmos DB for PostgreSQLSAP CAP (Java) with Azure Cosmos DB for PostgreSQLThe Azure half of the pair: Cosmos DB speaking PostgreSQL, used from CAP Java. Same shape as the Aurora post, and reading both is how you see what is actually portable between them.shanthakumar_krishnaswamy, published 2023-08-02
SAP CAP (Java) with Azure Cosmos DB for PostgreSQL
Database connectors has changed twice since this was published, most recently in @sap/cds 10.1.0, 2026-09-07. Affects A recipe, Runnable code.
SAP CAP Lessons Learned: SQLite is single threaded, HANA is notSAP CAP Lessons Learned: SQLite is single threaded, HANA is notA page long, and one of the more useful pages here: the local database serialises what the deployed one runs in parallel, so concurrency bugs are invisible until they are not. Filed by the author as something the tutorials do not make clear.LucasMagriniRigo, published 2025-01-22
SAP CAP With Prostgres Serice in BTPSAP CAP With Prostgres Serice in BTPA step-by-step walkthrough of a CAP bookshop project on @cap-js/postgres, provisioning PostgreSQL on SAP BTP, hyperscaler option's trial plan through mta.yaml, building the MTA archive and deploying it to Cloud Foundry by hand, then inspecting the deployed database with pgAdmin over an SSH tunnel. It updates an earlier post by Mike Zaschka on the same topic to the package CAP now ships by default, though the manual build-and-deploy sequence it shows predates cds up folding those steps into one command by a day.satya-dev, published 2025-03-30
Using HANA Cloud’s "VECTOR_EMBEDDING" Function in CAPUsing HANA Cloud’s "VECTOR_EMBEDDING" Function in CAPEmbeddings generated inside the database rather than fetched from AI Core or an external model — a Q4 2024 HANA Cloud function, used from CAP. The shift it describes is where the embedding step lives, which changes what has to be deployed and what has to be called.published 2025-03-02
Schema evolutionCommunity only
HANA Database Migration: Handling Incompatible Changes to Existing TablesHANA Database Migration: Handling Incompatible Changes to Existing TablesThe question schema evolution exists for, asked plainly: how do you restructure a table in a production system that already holds live data. Incompatible changes are the ones CAP's own alter path will not make, which is where this starts.Sekar Somasundaram, published 2025-04-16
Run and Deploy SAP CAP (Node.js or Java) with PostgreSQL on SAP BTP Cloud FoundryRun and Deploy SAP CAP (Node.js or Java) with PostgreSQL on SAP BTP Cloud FoundryBoth runtimes in one walkthrough, and it stops on schema evolution — which is the reason to read it rather than one of the several other PostgreSQL posts here, since that is where the PostgreSQL story diverges from HANA's and the deploy stops being automatic.TiaXu, published 2023-07-12
Run and Deploy SAP CAP (Node.js or Java) with PostgreSQL on SAP BTP Cloud Foundry
Database connectors has changed twice since this was published, most recently in @sap/cds 10.1.0, 2026-09-07. Affects A recipe, Runnable code.
Async processingSAP only
Quick tip: event/task scheduling in CAP Node.js (in alpha state)Quick tip: event/task scheduling in CAP Node.js (in alpha state)A note on something spotted in capire's May 2025 release notes rather than a technique: CAP Node.js is to support scheduling events — actions and functions included — with callbacks, currently alpha and explicitly subject to change. Useful as a dated marker of the core moving into ground the community has been covering, and the alpha caveat is the point rather than a footnote.published 2025-10-30
DestinationsSAP only
CAP Service to Fetch + Create Sales Order in S4 HANA Public CloudCAP Service to Fetch + Create Sales Order in S4 HANA Public CloudA CAP Node.js walkthrough imports SAP S/4HANA Cloud's Sales Order OData API with cds import, adds csrf handling to the generated service definition, and forwards a custom REST action's reads and writes to the remote proxy through cds.connect.to, the pattern Service integration covers. The mta.yaml binds the SAP S/4HANA Cloud extensibility service and a SAP Destination service instance so the S/4HANA Public Cloud system's address and credentials stay outside the application, per Destinations.Mujeeb, published 2023-05-30
Connect to Public Cloud API in Node.js via Authorisation CodeConnect to Public Cloud API in Node.js via Authorisation CodeThe authorisation code flow rather than client credentials, which is the harder half: a service key, an XSUAA instance bound to the CAP app, and a destination, with the author saying plainly that this was challenging and they hope it saves somebody the same time.Egan, published 2025-07-22
Connecting On Premise Mail Destination and Sending Email Using SAP Cloud SDK JavaScript Version 3 on SAP CAPConnecting On Premise Mail Destination and Sending Email Using SAP Cloud SDK JavaScript Version 3 on SAP CAPMail from CAP through a company's own SMTP server rather than a hosted one, which is the case the existing answers did not cover — the author names them and says why each failed here: one needed an SMTP provider like Mailtrap, another solved it in Java. What is left is the connectivity: an on-premise mail destination reached from Node, and a hybrid profile to test it against.codebrokerad, published 2023-02-14
Connecting On Premise Mail Destination and Sending Email Using SAP Cloud SDK JavaScript Version 3 on SAP CAP
Destinations changed in @sap-cloud-sdk/connectivity 4.0.0, 2025-03-04. Affects Runnable code.
Consuming data from SAP Datasphere in SAP BTP CAP ApplicationsConsuming data from SAP Datasphere in SAP BTP CAP ApplicationsDatasphere as the source a CAP application reads from — the case for it being that Datasphere already unified the SAP and non-SAP data, so the application does not have to. From a real project.sudheer-tammana, published 2025-06-03
Establishing connectivity between a local CAP runtime and on-premise systemsEstablishing connectivity between a local CAP runtime and on-premise systemsReaching S/4HANA, an on-premise HANA or any HTTP service from a CAP process running on your laptop — the case where the connectivity proxy the platform provides is not there and the tunnel has to be arranged.vLeonkev, published 2025-10-15
Extending SAP Sales and Service Cloud V2 Using CAPExtending SAP Sales and Service Cloud V2 Using CAPAn extension target that does not run on BTP at all — Sales and Service Cloud V2 sits directly on hyperscalers — so the separation between core and extension is enforced rather than encouraged. That constraint is what makes the post worth reading.Quablab, published 2025-07-09
From REST to Datasphere: A CAP-based Integration ApproachFrom REST to Datasphere: A CAP-based Integration ApproachThe reverse direction and a second attempt: the authors had already written data into Datasphere with a small FastAPI service on the OPEN SQL schema, and this is what changed when they rebuilt it on CAP.christian_willi, published 2025-09-30
How to Call a Remote OData API from Your Local CAP Java ProjectHow to Call a Remote OData API from Your Local CAP Java ProjectThe Business Accelerator Hub sandbox called from a CAP Java project on a laptop, with a concrete finish line — a localhost URL that returns business partners. Everything needed to get there is listed, Maven and JDK versions included.Umezuki, published 2025-08-11
SAP BTP Destinations in a Nutshell Part 1 - Motivation & NoAuthentication DestinationsSAP BTP Destinations in a Nutshell Part 1 - Motivation & NoAuthentication DestinationsOpens a series on SAP BTP Destinations by walking through the simplest case, a NoAuthentication destination from one CAP Node.js app to another on Cloud Foundry, shown two ways: executeHttpRequest from @sap-cloud-sdk/http-client, and a manual sequence that reads the destination service's credentials from VCAP_SERVICES, fetches an OAuth token, and requests the destination by name before calling its URL. The manual path is written deliberately verbose to show what the Cloud SDK call does behind the scenes; later parts of the series cover the other destination types.JakobFra, published 2023-05-23
Sending Emails from SAP CAP Applications with Any SMTP ProviderSending Emails from SAP CAP Applications with Any SMTP ProviderWalks through sending mail from a CAP application with no dedicated mail service: create an SMTP destination for a Gmail account in the SAP BTP cockpit, bind it to the Cloud Foundry app, and call the sap-cf-mailer npm package from a CAP service handler naming that destination. The SAP Destination service holds the SMTP host, port and app password so the handler code names only the destination, and the same handler sends plain text, an HTML body, or a message with a base64-encoded attachment.MaheshSirsat1708, published 2025-08-19
Surviving and Thriving with the SAP Cloud Application Programming Model: Local development hurdlesSurviving and Thriving with the SAP Cloud Application Programming Model: Local development hurdlesThree hurdles in running a CAP application locally: services mocked with cds run --with-mocks return no data across OData associations until the ON clause is hand-written into the imported CDS, an on-premise API reached through the SAP Cloud Connector times out because its proxy is part of destinations and connectivity and reachable only from inside SAP BTP, and a Fiori frontend served from the HTML5 Application Repository needs the HTML5 Repo Mock to reach a local backend at all. It closes with the launch configurations the author uses for debugging cds watch locally and attaching to a running Cloud Foundry instance.maxstreifeneder, published 2023-02-02
Document outputUnmapped
Using Custom Actions to display PDF from SAP BTP Forms service into a CAP SAPUI5 applicationUsing Custom Actions to display PDF from SAP BTP Forms service into a CAP SAPUI5 applicationA requirement that arrived after the application was finished — render a PDF from the record currently open on an object page — and the join it needed: the Forms service bound to the CAP application, a custom action on the service, and a button on the object page header calling it.rodfior, published 2023-01-30
Event MeshSAP only
[Blog Post] SAP Event Mesh - Consuming S4 events simultaneously in CAP-based applications and SAP Integration Suite[Blog Post] SAP Event Mesh - Consuming S4 events simultaneously in CAP-based applications and SAP Integration SuiteOne S/4HANA event, two consumers at once: a CAP Java application and SAP Integration Suite. Late in a long Deep Dive series and written as such — the queues, the S/4HANA connection and the Integration Suite side were all established in earlier posts, so this is the part where they meet.AyushKumar and vipul.khullar, published 2023-03-24
[Blog Post] SAP Event Mesh - Consuming S4 events simultaneously in CAP-based applications and SAP Integration Suite
Event Mesh changed in @sap/cds 10.0.3, 2026-07-02. Affects Runnable code.
Beginners Guide to Advanced Event MeshBeginners Guide to Advanced Event MeshA scenario-by-scenario walkthrough of Advanced Event Mesh, run through Cloud Integration iFlows: publishing and consuming queue messages, dead message queue setup with retry counts and acknowledgment modes, direct messages, durable topic endpoints and selectors, time-to-live, REST Delivery Points, replay by replication group message ID, parallel consumers with partition keys, and the request-reply pattern. Each scenario is built and verified step by step against a Solace trial account standing in for AEM.PriyankaChak, published 2025-07-24
Complete Guide: Setting Up CAP Plugin for Advanced Event Mesh with OAuth AuthenticationComplete Guide: Setting Up CAP Plugin for Advanced Event Mesh with OAuth AuthenticationWritten because the plugin's own documentation stops short of the prerequisites and the author had to assemble them from three other sources and a help chapter. It joins them: the OIDC application in Identity Authentication, the OAuth profile in Broker Manager, the token checked before anything is wired, and only then the plugin. The author says plainly it came out of trial and error and was going to be a README.rpagni, published 2025-11-10
Event Driven Architecture with Event Mesh – Part-2Event Driven Architecture with Event Mesh – Part-2Part 1 published a message and stopped there; this closes the loop by giving it somewhere to go. A REST API built in Integration Suite is registered as a webhook on the Event Mesh queue, and the chain is run end to end — CAP to Event Mesh to Integration Suite to Twilio — so the consumer side and the webhook configuration are what this adds.Avinash_Vaidya, published 2023-01-30
Event Driven Architecture with Event Mesh – Part-2
Event Mesh changed in @sap/cds 10.0.3, 2026-07-02. Affects A recipe, Runnable code.
Event enabling SAP Data Replication Framework with Advanced Event Mesh & AIFAEMEvent enabling SAP Data Replication Framework with Advanced Event Mesh & AIFAEMWalks through connecting SAP's ABAP-side Data Replication Framework to Advanced Event Mesh by way of the AIFAEM add-on, bypassing SAP Cloud Integration: a custom ABAP class maps business-partner replication data into AIF, which publishes it to AEM in CloudEvents format. The author's own disclaimer favours the standard pattern instead — a Standard DRF Replication through an Integration Suite iFlow with the AEM adapter — and presents this direct, custom-ABAP route only as a documented alternative.AlexPfeil, published 2025-08-21
How to Perform Initial Loads from S/4HANA to Advanced Event Mesh with Odata PollHow to Perform Initial Loads from S/4HANA to Advanced Event Mesh with Odata PollWalks through building a Cloud Integration flow that polls the S/4HANA Business Partner OData API on a timer, splits the response into individual records, and publishes each as an event to Advanced Event Mesh through its adapter, with the topic set dynamically from a grouping property. Selects fields and expands associations with $select/$expand against an EDMX from the API Business Hub, and works around the OData V2 adapter's lack of JSON support by falling back to the HTTP adapter with an XML-to-JSON converter. Flags the trade-off: the pattern needs no backend change beyond activating the API, but the polled payload has to stay aligned with whatever event format the ERP pushes on change.AlexPfeil, published 2025-04-04
How to use a CAP application to manage DMQ messages on SAP Advanced Event MeshHow to use a CAP application to manage DMQ messages on SAP Advanced Event MeshA CAP application built for the failure path rather than the happy one. Messages that land in a Dead Message Queue are deleted for good when their TTL expires, so this pulls them out first and holds them in quarantine, where a Fiori elements UI lets someone inspect a payload, correct it and reinject it. An operations tool, and a rare write-up of what to do after delivery has already failed.stefan-keuker, published 2025-12-31
How to use a CAP application to manage DMQ messages on SAP Advanced Event Mesh
Event Mesh changed in @sap/cds 10.0.3, 2026-07-02. Affects Runnable code.
Implementing Event-Driven Architecture in CAP Java using SAP Event MeshImplementing Event-Driven Architecture in CAP Java using SAP Event MeshPublish and consume from the Java stack, which most of the Event Mesh writing on the community does not cover. The MTA declaration and the credentials come first, then the emit and the handler, then the two sections that make it worth keeping: error handling with retries, and securing the events with OAuth.Soumya-Pirlamarla, published 2025-11-26
Implementing Event-Driven Architecture in CAP Java using SAP Event Mesh
Event Mesh changed in @sap/cds 10.0.3, 2026-07-02. Affects A recipe.
SAP Event Mesh: S4 HANA On-Prem and SAP CI(BTP IS) through WebSocket and WebhooksSAP Event Mesh: S4 HANA On-Prem and SAP CI(BTP IS) through WebSocket and WebhooksA step-by-step walkthrough of wiring Event Mesh to publish and consume events between an on-premise S/4HANA system and Cloud Integration, contrasting persistent queues (one subscriber, kept until consumed) against unpersisted topics, and WebSocket's AMQP transport against webhook delivery for the same queue. Two tested findings support it: a queue consumer running in continuous consumption mode receives a message ahead of a webhook on the same topic, and a message stays queued and is retried (almost 8770 times in under a minute, in the author's test) until the consumer processes it successfully.FarooqAhmed, published 2023-10-03
Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 1/2Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 1/2The theory half of a pair introducing cds-kafka: what the plugin is for and what it can do, with event-driven architecture set up as the reason rather than assumed. Nothing is deployed here — the running application is part two — so this is the post to read if the question is whether Kafka belongs in the picture at all rather than how to wire it.published 2025-01-02
Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 2/2Using Apache Kafka for messaging in the SAP Cloud Application Programming Model (CAP) – Part 2/2The practical half: concrete use cases for cds-kafka, running locally and on BTP. It opens by placing the plugin among SAP's own event-driven offerings rather than beside them, which is the part that decides whether you reach for this or for Event Mesh — a comparison a plugin's own README rarely makes about itself.published 2025-01-13
NotificationsSAP only
Connecting On Premise Mail Destination and Sending Email Using SAP Cloud SDK JavaScript Version 3 on SAP CAPConnecting On Premise Mail Destination and Sending Email Using SAP Cloud SDK JavaScript Version 3 on SAP CAPMail from CAP through a company's own SMTP server rather than a hosted one, which is the case the existing answers did not cover — the author names them and says why each failed here: one needed an SMTP provider like Mailtrap, another solved it in Java. What is left is the connectivity: an on-premise mail destination reached from Node, and a hybrid profile to test it against.codebrokerad, published 2023-02-14
Connecting On Premise Mail Destination and Sending Email Using SAP Cloud SDK JavaScript Version 3 on SAP CAP
Destinations changed in @sap-cloud-sdk/connectivity 4.0.0, 2025-03-04. Affects Runnable code.
How To Implement Alert Notification Service in Cloud Application ProgrammingHow To Implement Alert Notification Service in Cloud Application ProgrammingA click-by-click setup of BTP's Alert Notification service against a CAP application. Operational alerting rather than business notification — the audience is whoever is on call, not the user — which is the distinction the Work Zone plugin here does not cover.Aditya12, published 2025-05-27
Sending Emails from SAP CAP Applications with Any SMTP ProviderSending Emails from SAP CAP Applications with Any SMTP ProviderWalks through sending mail from a CAP application with no dedicated mail service: create an SMTP destination for a Gmail account in the SAP BTP cockpit, bind it to the Cloud Foundry app, and call the sap-cf-mailer npm package from a CAP service handler naming that destination. The SAP Destination service holds the SMTP host, port and app password so the handler code names only the destination, and the same handler sends plain text, an HTML body, or a message with a base64-encoded attachment.MaheshSirsat1708, published 2025-08-19
RFC connectivityUnmapped
Consume ABAP RFC Function Modules in CAPConsume ABAP RFC Function Modules in CAPCalling an existing RFC function module from CAP instead of asking somebody to build an OData service for it — which is the actual decision, since the alternative is custom development on the ABAP side for a function that already works.published 2025-03-28
Service integrationSAP only
#BTP #SAPCAP: Quirky Nuggets (N05-N06)#BTP #SAPCAP: Quirky Nuggets (N05-N06)On SAP BTP, Cloud Foundry Runtime, a one-shot PostgreSQL db-deployer app can be restarted by the platform's default port-type health check inside its 60-second timeout, re-running the deploy and duplicating data in the PostgreSQL database; setting health-check-type to process or http, via cf commands or the app's mta.yaml parameters, avoids it. In CAP, a remote service's entities are imported and consumed through cds.connect.to and queried via a projection, but its functions and actions cannot be projected: they must be redefined in the consuming service's own interface, with the handler forwarding the call to the remote proxy.published 2023-07-27
CAP Service to Fetch + Create Sales Order in S4 HANA Public CloudCAP Service to Fetch + Create Sales Order in S4 HANA Public CloudA CAP Node.js walkthrough imports SAP S/4HANA Cloud's Sales Order OData API with cds import, adds csrf handling to the generated service definition, and forwards a custom REST action's reads and writes to the remote proxy through cds.connect.to, the pattern Service integration covers. The mta.yaml binds the SAP S/4HANA Cloud extensibility service and a SAP Destination service instance so the S/4HANA Public Cloud system's address and credentials stay outside the application, per Destinations.Mujeeb, published 2023-05-30
Agent access to your codeSAP and community
Boost your CAP Development with AI: Introducing the MCP Server for CAPBoost your CAP Development with AI: Introducing the MCP Server for CAPThe announcement of the development-tool half of the two things called MCP here: a server that gives an agent context about the project in front of it and relevant CAP examples, so Claude Code or Copilot steers better. Names the agents it was tried with, which is more than most announcements do.published 2025-09-03
Building a CAP service with cds‑mcp and Cline — HANDS‑ON SUPER BASIC GUIDE [ with screenshots ] 🍌Building a CAP service with cds‑mcp and Cline — HANDS‑ON SUPER BASIC GUIDE [ with screenshots ] 🍌Somebody following the CAP MCP server announcement all the way through, and writing down what it cost: a CAP service in VS Code wired to S/4HANA through a destination, plus the real bumps — Windows PATH and global installs — that the announcement does not have.smarchesini, published 2025-09-21
Evaluating SAP’s new MCP servers: UI5, CAP, and Fiori tools in practiceEvaluating SAP’s new MCP servers: UI5, CAP, and Fiori tools in practiceSomeone trying SAP's three new MCP servers rather than repeating the announcement. It sets the official positioning first — MCP as the bridge from coding assistants to SAP tooling across Cursor, Windsurf, Copilot, Cline and Claude Code, with best-practice scaffolds and BTP-aligned guardrails — and then reports what using them is actually like. The rare kind of post that tests a vendor claim.published 2025-09-04
Give Your AI Agent Some Tools: Introducing the UI5 MCP ServerGive Your AI Agent Some Tools: Introducing the UI5 MCP ServerAnnounces @ui5/mcp-server, SAP's open-source MCP server for UI5 development, and walks through its initial six tools. get_project_info, get_api_reference and run_ui5_linter (which applies UI5 linter fixes) read the project's own version, manifest and code rather than an LLM's training data, which is what agent access to your code explains. create_ui5_app scaffolds a new JavaScript or TypeScript project, standalone or inside an existing CAP application, from templates with pre-configured OData model setups, which is generators.published 2025-09-03
SAP Fiori Tools Update – First Release of the SAP Fiori MCP Server for Agentic AISAP Fiori Tools Update – First Release of the SAP Fiori MCP Server for Agentic AIThe release announcement for the Fiori MCP server, placed as the step after the Project Accelerator: an assistant can create and edit Fiori applications directly rather than describing what a developer should do. The vendor's own framing, so read it beside the independent evaluation of the same servers rather than instead of it.published 2025-09-03
Agent guidanceSAP and community
⚡Unlocking the Power of LLMs in CAP: Understanding llms.txt and llms-full.txt⚡Unlocking the Power of LLMs in CAP: Understanding llms.txt and llms-full.txtllms.txt and llms-full.txt for CAP — a plain-text map of the documentation, written for an agent that arrived by fetching a URL rather than one somebody configured. The convention the atlas uses for itself, applied to capire.Yogananda, published 2025-05-18
Building a CAP service with cds‑mcp and Cline — HANDS‑ON SUPER BASIC GUIDE [ with screenshots ] 🍌Building a CAP service with cds‑mcp and Cline — HANDS‑ON SUPER BASIC GUIDE [ with screenshots ] 🍌Somebody following the CAP MCP server announcement all the way through, and writing down what it cost: a CAP service in VS Code wired to S/4HANA through a destination, plus the real bumps — Windows PATH and global installs — that the announcement does not have.smarchesini, published 2025-09-21
Enhancing Unit Testing in SAP CAP Java Applications with GitHub CopilotEnhancing Unit Testing in SAP CAP Java Applications with GitHub CopilotBuilt on SAP's own CAP Java unit-testing guide, and the question is narrow: how much of that does an assistant actually write for you. The author's own getting-started post is the one to read first.Anjali_Pathak, published 2025-09-04
Agent toolingSAP only
Event Driven SAP CAP on Kyma with Agentic AI and UI Auto RefreshEvent Driven SAP CAP on Kyma with Agentic AI and UI Auto RefreshA prototype, described as one: a plain CAP application made to react to external events on Kyma, with an agent in the loop and the UI refreshing itself rather than being reloaded. Short — it reports what was built and why, not how to rebuild it.Shahid, published 2025-12-01
Explaining SAP Joule for HR Business Users & Functional Consultants.Explaining SAP Joule for HR Business Users & Functional Consultants.Written for HR business users and functional consultants, this walks through how SAP Joule is provisioned on SAP BTP and wired into SuccessFactors: the Joule instance sits in a BTP subaccount, SAP Build Work Zone is created alongside it, and Identity provisioning syncs users from SuccessFactors into Build Work Zone while Cloud Identity Services authenticates the launch through an IAS tenant. It lists five prerequisites for the connection — a BTP global account, a Joule entitlement, Cloud Identity Service and SuccessFactors admin access, and the right personas — and notes that running BTP's booster adds the Joule permission to the SuccessFactors user's profile.santanuray_learner, published 2025-03-23
How Redwood Software and SAP are shaping the next era of automation with Joule StudioHow Redwood Software and SAP are shaping the next era of automation with Joule StudioRedwood's Field CTO describes a tech preview where an SAP Basis administrator tells SAP Joule in natural language to pause background jobs and dependent Integration Suite iFlows for unplanned system maintenance; Joule acts as a control tower, triggering a pre-approved RunMyJobs workflow and asking for approval before the restart proceeds. The integration is built by publishing RunMyJobs operations to the SAP Business Accelerator Hub, securing access through SAP BTP with API keys and role-based permissions, and combining those actions into a skill inside Joule Studio's low-code design canvas.gmblom, published 2025-11-02
Joule Studioがリリースされたので早速CAPアプリを自然言語で操作するカスタムスキルを構築してみたJoule Studioがリリースされたので早速CAPアプリを自然言語で操作するカスタムスキルを構築してみたA walkthrough of building a custom Joule Studio skill on a CAP bookshop app: cds add sample and cds add mta scaffold the project and its deployment descriptor, cds compile srv/ --to xsuaa generates the role template behind the @requires: 'admin' check on AdminService from the SAP Authorization and Trust Management service (XSUAA), and mbt build packages the app for deployment to the SAP BTP, Cloud Foundry Runtime. The skill reaches the deployed OData API through the SAP Destination service, configured with the OAuth2 Client Credentials grant using the client ID, secret and token endpoint from the app's XSUAA service key, so Joule answers a natural-language question about a book by its ID.takayuki_tanaka, published 2025-07-30
Document extractionSAP only
Cloud Integration with Document AICloud Integration with Document AIWalks through connecting Cloud Integration to SAP Document AI: an iFlow posts a prescription PDF to Document AI's job API, polls the job endpoint until it completes, and a groovy script reads back the result, keeping only the fields above a stated 60% confidence threshold. The scenario is a hospital extracting a new patient's past illnesses, allergies and blood group from uploaded prescriptions, matched against a custom extraction schema.PriyankaChak, published 2025-08-10
Integrating SAP Document Information Extraction (Document AI) with SAP CAP – Step by StepIntegrating SAP Document Information Extraction (Document AI) with SAP CAP – Step by StepThe forward direction, in full: a PDF or scan arriving at a CAP service, sent to Document Information Extraction, and the fields coming back into the model. Long, and step-by-step in the literal sense — the service binding and the request shapes are all written out.furkan5, published 2025-10-09
LLM integrationSAP only
A ChatGPT-like chat app built with modern SAP technologies (CAP, SAPUI5) – Part 1/3A ChatGPT-like chat app built with modern SAP technologies (CAP, SAPUI5) – Part 1/3The concepts before the code: what the GPT model and its API actually offer, and what the finished chat application looks like — personalities included. Written in the weeks when the ground was moving under it, and the post carries its own change log to prove it: GPT-3.5 added on 1 March, GPT-4 on 15 March, and an admission that a series planned as two posts became three.published 2023-02-22
A ChatGPT-like chat app built with modern SAP technologies (CAP, SAPUI5) – Part 1/3
cap-ui5-gpt-chat: no published releases, repository quiet for 41 months. Affects Runnable code.
A ChatGPT-like chat app built with modern SAP technologies (CAP, SAPUI5) – Part 2/3A ChatGPT-like chat app built with modern SAP technologies (CAP, SAPUI5) – Part 2/3The backend: CAP with TypeScript, the entities holding chats and personalities, and the service that talks to the API. This is where the streamed completion and the repositories behind the handler come from, which is the part of the sample still worth lifting even though the model access has since been superseded by AI Core.published 2023-02-24
A ChatGPT-like chat app built with modern SAP technologies (CAP, SAPUI5) – Part 2/3
cap-ui5-gpt-chat: no published releases, repository quiet for 41 months. Affects Runnable code.
A ChatGPT-like chat app built with modern SAP technologies (CAP, SAPUI5) – Part 3/3A ChatGPT-like chat app built with modern SAP technologies (CAP, SAPUI5) – Part 3/3The SAPUI5 frontend of the sample, and mostly an argument for writing UI5 in TypeScript: ES imports in place of sap.ui.define, a class with real private members in place of the underscore convention, and the service types generated from the CDS model copied into the UI package, so one IChats interface types the OData object the controller reads. The second half is structure — a formatter class and a singleton LayoutManager called from the XML view through core:require, a confirmation helper taking a callback, a dialog class resolving a promise, a generic createEntity<T> on a service class — all of it to keep every controller under 100 lines. What it says about arranging a UI5 app holds whatever model sits behind the chat; the tooling around it is of its date, and the post calls UI5's TypeScript support experimental.published 2023-02-27
A ChatGPT-like chat app built with modern SAP technologies (CAP, SAPUI5) – Part 3/3
cds2types. Affects Runnable code.
Automate your Job Postings Using Generative AI (ChatGPT) & SAP Build Process Automation AppsAutomate your Job Postings Using Generative AI (ChatGPT) & SAP Build Process Automation AppsA process that drafts its own text: ChatGPT writing job postings, SAP Build Process Automation carrying them through approval, and CAP in between. Presented as a generic pattern the author expects to be adapted rather than copied.shivamshukla12, published 2023-08-10
Creating a meal generator application with SAP Build, Cloud Application Programming and openAICreating a meal generator application with SAP Build, Cloud Application Programming and openAIIngredients in, meal suggestions out, assembled from BTP services plus OpenAI and Google APIs. A small application built for the pleasure of it, and useful here as the plainest example of CAP holding the middle of a generative flow.former_member793421, published 2023-07-17
Empowering Your Data Analytics with GPT-3 and SAP CAP IntegrationEmpowering Your Data Analytics with GPT-3 and SAP CAP IntegrationFree text in, SQL out, answer back in a sentence — the model writes the query, CAP runs it, and the model turns the rows into prose. Written in the GPT-3 window, so the model access has dated, but the three-step shape has not, and it is a different bet from retrieval: nothing is embedded, the schema is the context.Former Member, published 2023-03-10
Enhancing Business Processes with SAP BTP AI in SAP Integration SuiteEnhancing Business Processes with SAP BTP AI in SAP Integration SuiteWalks through a post-exit iflow in SAP Integration Suite that calls an LLM through SAP AI Core's Generative AI Hub to turn a customer's free-text return comment into one of a fixed set of SAP rejection-reason codes, so an inbound ORDERS05 IDoc carries a decision (E1EDP01-ABGRU) the ERP can act on without pausing for manual review. The worked example is a Commerce Cloud returns flow into S/4HANA; the piece argues the same bounded-classification pattern fits other narrative fields — delivery-exception remarks, expense-claim justifications — where the cost of an LLM call is repaid by removing a human review step, and points to a colleague's post on the Generative AI Hub orchestration workflow for the guardrailing (prompt templating, data masking) it only names.arunmaarirajha_kv, published 2025-12-15
How to Reduce Prompt Token Costs Using Toon = Save MoneyHow to Reduce Prompt Token Costs Using Toon = Save MoneyToken spend treated as a running cost rather than a detail, and TOON as the lever. Companion reading to the CAP adapter for the same format that is indexed here.Yogananda, published 2025-11-12
How to Reduce Prompt Token Costs Using Toon = Save Money
LLM integration changed in @cap-js/ai 1.0.0, 2026-04-28. Affects A recipe, Runnable code.
How to use Cloud SDK for AI in an existing CAP NodeJS Project in CommonJSHow to use Cloud SDK for AI in an existing CAP NodeJS Project in CommonJSA dependency that is ESM-only inside a project that is CommonJS, and the author's judgement that converting the project was too risky. What follows is the esbuild workaround, which is the honest answer when the ecosystem has moved and your codebase has not.Jacky_Liu1, published 2025-08-01
Lets Talk to the Database - CAP & SQLite Powered by Google Gemini-2.5-ProLets Talk to the Database - CAP & SQLite Powered by Google Gemini-2.5-ProNatural language against a CAP service on SQLite, with a non-SAP model doing the translation. Written as a learning exercise rather than a pattern, and the choice of Gemini over anything in the AI hub is the interesting part of it.ShivamShuklaSAP, published 2025-04-16
Prompt-Driven Development: Building Full-Stack SAP CAP Apps from User StoriesPrompt-Driven Development: Building Full-Stack SAP CAP Apps from User StoriesA user story in, a scaffolded full-stack CAP application out, through SAP Build Code and Joule. The question it is actually asking is how much of the foundational code is worth generating, and it answers by generating all of it.AnuradhaDhingan, published 2025-12-11
Streaming LLM Output with CAP and WebSocketsStreaming LLM Output with CAP and WebSocketsTokens arriving from the AI SDK's orchestration module, forwarded to the browser as they come rather than after the model finishes. Covers all four pieces — enabling WebSocket support in CAP, a service with actions and events, the streaming itself, and a frontend on the native WebSocket API — which is what makes it the clearest case for why a CAP service would want a socket at all.RobinP, published 2025-11-18
Streaming LLM Output with CAP and WebSockets
LLM integration changed in @cap-js/ai 1.0.0, 2026-04-28. Affects A recipe, Runnable code.
RAG on CDSUnmapped
HANA Cloud’s VECTOR EMBEDDING in CAP and Comparison with OpenAI EmbeddingHANA Cloud’s VECTOR EMBEDDING in CAP and Comparison with OpenAI EmbeddingTwo ways to produce the same embedding, run side by side: HANA Cloud's own VECTOR_EMBEDDING function against Azure OpenAI through the CAP LLM plugin. The CDS side is short — an element of type cds.Vector maps to REAL_VECTOR on deploy — so what remains is the comparison, which is the thing you cannot get from either product's documentation alone.lalitmohan, published 2025-04-09
Using HANA Cloud’s "VECTOR_EMBEDDING" Function in CAPUsing HANA Cloud’s "VECTOR_EMBEDDING" Function in CAPEmbeddings generated inside the database rather than fetched from AI Core or an external model — a Q4 2024 HANA Cloud function, used from CAP. The shift it describes is where the embedding step lives, which changes what has to be deployed and what has to be called.published 2025-03-02
Audit loggingSAP only
How to enable SAP Audit Log Viewer service to collect all Audit logs from BTP Services - Part 1How to enable SAP Audit Log Viewer service to collect all Audit logs from BTP Services - Part 1Walks through subscribing to the SAP Audit Log service's viewer app from the SAP BTP cockpit and creating a RoleCollection from the auditlog-management and auditlog-viewer role templates, assigned to a user or by a rule on the IDP's SAML assertion, to read audit logging events in a subaccount. The post's own update notes that a BTP release from 19 February 2026 removed the need for that role-assignment step. It also lists which Cloud Foundry services write audit log events, pointing to each service's own auditing page rather than detailing them here.Yogananda, published 2025-03-07
How to implement SAP BTP Audit log service in a CAP ApplicationHow to implement SAP BTP Audit log service in a CAP ApplicationThe setup half: binding the BTP Audit Log service to a CAP application and getting the annotated path working, which is the step before anything custom becomes a question.KrishnaSharma7, published 2025-01-01
How to implement SAP BTP Audit log service in a CAP Application
@cap-js/audit-logging has been through 2 major lines since this was published: 0.9 (2025-06), 1 (2025-07). Affects A recipe.
Implementing Custom Audit Logging in SAP CAP ApplicationsImplementing Custom Audit Logging in SAP CAP ApplicationsWhere the annotations stop. CAP logs personal-data operations automatically once a model is annotated; this is about the events that are not that — an unauthorised access attempt, a business action somebody wants a trail for — and what writing those yourself involves.gopalanand, published 2025-10-09
Integrating SAP Cloud Identity Services (Identity Authentication - IAS) with SAP Audit Log ViewerIntegrating SAP Cloud Identity Services (Identity Authentication - IAS) with SAP Audit Log ViewerWalks through wiring an Identity Authentication tenant of Cloud Identity Services into the SAP Audit Log service on SAP BTP, Cloud Foundry: from the tenant's Monitoring & Reporting tile, adding the target BTP subaccount's tenant ID and subdomain ties the two together, and after a 15-20 minute wait the resulting Audit Log Viewer link surfaces logs of personal-data changes and of successful and failed authentications. Logs are then filtered by date and keyword, each entry carrying its event category, event and object type, timestamp, and the user who performed the action.Yogananda, published 2025-03-23
AuthenticationSAP only
Building Custom Authentication in SAP CAPBuilding Custom Authentication in SAP CAPpublished 2025-10-25
Building Custom Authentication in SAP CAP
cds 9, maintenance until 2027-06. Affects A recipe.
Connect to Public Cloud API in Node.js via Authorisation CodeConnect to Public Cloud API in Node.js via Authorisation CodeThe authorisation code flow rather than client credentials, which is the harder half: a service key, an XSUAA instance bound to the CAP app, and a destination, with the author saying plainly that this was challenging and they hope it saves somebody the same time.Egan, published 2025-07-22
How to Access SAP Cloud Logging Service Dashboards Using IAS SAML AuthenticationHow to Access SAP Cloud Logging Service Dashboards Using IAS SAML AuthenticationWalks through wiring SAML 2.0 single sign-on between SAP Cloud Identity Services (IAS) and SAP Cloud Logging so its OpenSearch dashboards accept IAS logins instead of a service key: creating the SAML application in IAS, editing the instance's saml parameters (admin_group, idp.metadata_url, idp.entity_id, sp.entity_id), setting the matching entity ID and endpoints on the IAS side, and mapping an IAS group to the all_access role through a groups attribute. It also shows how to read a 403 on the dashboard as SAML login succeeding while the group-to-role mapping is still missing.Umezuki, published 2025-12-30
Integrating SAP Cloud Identity Services (Identity Authentication - IAS) with SAP Audit Log ViewerIntegrating SAP Cloud Identity Services (Identity Authentication - IAS) with SAP Audit Log ViewerWalks through wiring an Identity Authentication tenant of Cloud Identity Services into the SAP Audit Log service on SAP BTP, Cloud Foundry: from the tenant's Monitoring & Reporting tile, adding the target BTP subaccount's tenant ID and subdomain ties the two together, and after a 15-20 minute wait the resulting Audit Log Viewer link surfaces logs of personal-data changes and of successful and failed authentications. Logs are then filtered by date and keyword, each entry carrying its event category, event and object type, timestamp, and the user who performed the action.Yogananda, published 2025-03-23
Joule Studioがリリースされたので早速CAPアプリを自然言語で操作するカスタムスキルを構築してみたJoule Studioがリリースされたので早速CAPアプリを自然言語で操作するカスタムスキルを構築してみたA walkthrough of building a custom Joule Studio skill on a CAP bookshop app: cds add sample and cds add mta scaffold the project and its deployment descriptor, cds compile srv/ --to xsuaa generates the role template behind the @requires: 'admin' check on AdminService from the SAP Authorization and Trust Management service (XSUAA), and mbt build packages the app for deployment to the SAP BTP, Cloud Foundry Runtime. The skill reaches the deployed OData API through the SAP Destination service, configured with the OAuth2 Client Credentials grant using the client ID, secret and token endpoint from the app's XSUAA service key, so Joule answers a natural-language question about a book by its ID.takayuki_tanaka, published 2025-07-30
SAP Build Process Automation – Use Principal Propagation in Actions sample: CAP Node.js ServiceSAP Build Process Automation – Use Principal Propagation in Actions sample: CAP Node.js ServiceThe follow-up that carries the identity through. It takes the CAP service from the Actions tutorial and puts the calling user's identity behind it — an XSUAA instance, a trust configuration, an OAuthSAMLBearerAssertion destination, and the service changed to use that instance — so a step runs on behalf of a person rather than as the process.TJe, published 2023-06-22
SAP Build Process Automation – Use Principal Propagation in Actions sample: CAP Node.js Service
Workflow integration has changed twice since this was published, most recently in @cap-js/n8n 0.0.1, 2026-08-27. Affects A recipe.
SAP CAP JWT Token Flow in codeSAP CAP JWT Token Flow in codeOne question, answered precisely: at what point does the JWT exist and how does it end up on req.headers.authorization in a CAP handler. XSUAA issues it and the approuter carries it, and the post follows it through both.sandeepmalhotra, published 2023-04-03
SAP CAP JWT Token Flow in code
Authentication changed in CAP Java 3.0.1, 2024-07-26. Affects Runnable code.
Securing CAP Applications with SAP Cloud Identity Services and AMSSecuring CAP Applications with SAP Cloud Identity Services and AMSIdentity Authentication and AMS together as the current answer for a CAP application — authentication, single sign-on and the identity lifecycle on one side, policies on the other.gopalanand, published 2025-12-04
XSUAA Based Authentication - Using Managed ApprouterXSUAA Based Authentication - Using Managed ApprouterOne half of a pair published the same day, both starting from capire's list of authentication kinds and then going end to end on XSUAA. This is the managed approuter route, where the platform runs the router and the application supplies configuration rather than a module.rahul_rajagopal, published 2023-09-25
XSUAA Based Authentication - Using Managed Approuter
Authorization has changed twice since this was published, most recently in CAP Java 3.7.1, 2025-01-30. Affects A recipe.
AuthorizationSAP only
[Part - 1] Enrich CAP based Services with Behaviors using Annotations[Part - 1] Enrich CAP based Services with Behaviors using AnnotationsWalks through CDS annotations that add behaviour beyond CRUD: @readonly and @insertonly take away write, update or delete on an entity or element, each shown with the OData metadata it generates. @mandatory, @assert.unique, @assert.integrity, @assert.format and @assert.range then enforce input checks that @sap/cds runs on write, with the SQL or HANA constraint @assert.unique compiles to and the error code each rejection returns. It names @restrict and @requires but defers them, calling authorization too large a topic for this post.published 2023-01-28
Joule Studioがリリースされたので早速CAPアプリを自然言語で操作するカスタムスキルを構築してみたJoule Studioがリリースされたので早速CAPアプリを自然言語で操作するカスタムスキルを構築してみたA walkthrough of building a custom Joule Studio skill on a CAP bookshop app: cds add sample and cds add mta scaffold the project and its deployment descriptor, cds compile srv/ --to xsuaa generates the role template behind the @requires: 'admin' check on AdminService from the SAP Authorization and Trust Management service (XSUAA), and mbt build packages the app for deployment to the SAP BTP, Cloud Foundry Runtime. The skill reaches the deployed OData API through the SAP Destination service, configured with the OAuth2 Client Credentials grant using the client ID, secret and token endpoint from the app's XSUAA service key, so Joule answers a natural-language question about a book by its ID.takayuki_tanaka, published 2025-07-30
Securing CAP Applications with SAP Cloud Identity Services and AMSSecuring CAP Applications with SAP Cloud Identity Services and AMSIdentity Authentication and AMS together as the current answer for a CAP application — authentication, single sign-on and the identity lifecycle on one side, policies on the other.gopalanand, published 2025-12-04
Securing SAP CAP Applications: XSUAA, Roles, and Authorization Best PracticesSecuring SAP CAP Applications: XSUAA, Roles, and Authorization Best PracticesWalks through securing a CAP service end to end: declaring scopes and role templates in xs-security.json for the SAP Authorization and Trust Management service (XSUAA), restricting CDS service definitions with @restrict per role, and dropping into handler code where a rule needs custom logic, with a @sap/cds Node.js example that tests roles through req.user.is and a Java one that tests scopes through hasScope. It closes in the BTP cockpit, where a role collection is assigned to users so that their JWT carries the scopes those checks read.Soumya-Pirlamarla, published 2025-07-14
XSUAA Based Authentication - Using Managed ApprouterXSUAA Based Authentication - Using Managed ApprouterOne half of a pair published the same day, both starting from capire's list of authentication kinds and then going end to end on XSUAA. This is the managed approuter route, where the platform runs the router and the application supplies configuration rather than a module.rahul_rajagopal, published 2023-09-25
XSUAA Based Authentication - Using Managed Approuter
Authorization has changed twice since this was published, most recently in CAP Java 3.7.1, 2025-01-30. Affects A recipe.
Change trackingSAP only
BTP CAP : Custom plugin to separate generic change log capture logicBTP CAP : Custom plugin to separate generic change log capture logicWalks through building a custom [CAP](ecosystem:cap) plugin that centralises change-log capture: on cds.once('served') it collects entities annotated @audit, then hooks srv.before('UPDATE') to read the existing record, diff it field by field against the incoming payload, and record old/new values with the user and timestamp. It also documents a cds build failure packaging the plugin's own directory into gen/srv for MTA deployment, fixed by adding it as a copyfiles build-parameter step in mta.yaml.sreehari_vpillai, published 2023-05-10
Open Sourcing CAP – how to learn more or get involvedOpen Sourcing CAP – how to learn more or get involvedA roundup of CAP's open-sourcing, begun at TechEd the year before, pointing to a webinar recording, a podcast episode and reCAP 2023 talks for background. Among the components it names are a feature toggle library giving Node.js CAP apps live-updatable toggles backed by Redis, a new pluggable database layer with SQLite and PostgreSQL implementations plus a generic SQL layer, and a change tracking component that builds a change history for data from CDS models.Fempel, published 2023-10-02
Data privacyUnmapped
#SAPCAP: Win Customer Trust using Data Privacy and Protection Services on BTP - Part 1#SAPCAP: Win Customer Trust using Data Privacy and Protection Services on BTP - Part 1First of a three-part series on designing a CAP application on BTP that uses the platform's data privacy services, and this part is the vocabulary before any of it: personal data, the rights a data subject has under GDPR, and the data controller and processor distinction, worked through an order-confirmation SMS example. It names four BTP services: SAP Personal Data Manager, SAP Data Retention Manager, SAP Data Privacy Integration and SAP Audit Log service. Only the first is described, as a service running in the Cloud Foundry environment that finds data subjects across one or more applications and services, makes requests on an individual's behalf about their personal information and forwards them for handling, and notifies individuals which of their personal information is being used or sends them a copy of their record by email; the CAP-side annotations and PDM's own application features follow in Part 2 and Part 3.Ajit_K_Panda, published 2023-03-18
#SAPCAP: Win Customer Trust using Data Privacy and Protection Services on BTP - Part 2#SAPCAP: Win Customer Trust using Data Privacy and Protection Services on BTP - Part 2Walks through wiring a CAP service to SAP's Personal Data Manager (PDM) on BTP: entity, key and field-level @PersonalData annotations that mark data subjects and personal fields, the @PersonalData.IsPotentiallyPersonal / IsPotentiallySensitive distinction that drives audit logging, and the @Communication.Contact annotation PDM needs to search for a data subject. Covers the xsuaa trust arrangement and service binding that let the standalone PDM application call back into the CAP service to read and manage that data. Second of a three-part series; the annotation model it demonstrates is CAP's own mechanism for data privacy compliance, exercised against a sample 'Game Shop' application.Ajit_K_Panda, published 2023-03-18
#SAPCAP: Win Customer Trust using Data Privacy and Protection Services on BTP - Part 3#SAPCAP: Win Customer Trust using Data Privacy and Protection Services on BTP - Part 3Third of a three-part series, this covers the UI side of SAP's Personal Data Manager (PDM) once it is subscribed and wired to a CAP application: a Customer Service Representative searches for a data subject, views the personal data the application's annotations expose, and requests correction, deletion or export on their behalf, while an Operators Clerk processes those requests through to completion. PDM stores none of the personal data itself, only the requests and access logs, which an administrator downloads through the separate Data Transport app. It builds on the annotation model the first two parts introduce, so what it demonstrates is PDM's own delivered UI rather than anything a CAP application must build itself.Ajit_K_Panda, published 2023-03-18
Input validationSAP only
[Part - 1] Enrich CAP based Services with Behaviors using Annotations[Part - 1] Enrich CAP based Services with Behaviors using AnnotationsWalks through CDS annotations that add behaviour beyond CRUD: @readonly and @insertonly take away write, update or delete on an entity or element, each shown with the OData metadata it generates. @mandatory, @assert.unique, @assert.integrity, @assert.format and @assert.range then enforce input checks that @sap/cds runs on write, with the SQL or HANA constraint @assert.unique compiles to and the error code each rejection returns. It names @restrict and @requires but defers them, calling authorization too large a topic for this post.published 2023-01-28
#CAP-TechBytes Input Validation#CAP-TechBytes Input ValidationThe annotations one at a time — @mandatory, @assert.unique, @assert.range including the enum form, @assert.format — each with what it produces. Ends on error handling, which is the part that decides whether any of it is usable from a UI.Thajunniza, published 2023-07-07
Rate limitingUnmapped
Edge Integration Cell : Design, deploy and manage APIsEdge Integration Cell : Design, deploy and manage APIsWalks through creating an API artifact in API Management on the customer-managed Edge Integration Cell runtime, including the option to generate the artifact by importing an OpenAPI specification rather than from a URL or by hand. It then attaches an Authentication policy and a Quota step capped at four calls per minute, deploys, and shows both the resulting 401 and the quota-breach error in the Monitor logs. The author frames it as the first of a series on Edge Integration Cell's policies.published 2023-11-15
ConfigurationSAP only
Tips for running CAP nodejs in SAP BTPTips for running CAP nodejs in SAP BTPDeliberately not a summary of capire: the author says up front that nothing here repeats the documented best practices, and the subject is configuration for running cloud-natively rather than correctly. Examples target Cloud Foundry, with the claim that they hold for Kyma too.published 2023-06-21
Tips for running CAP nodejs in SAP BTP
Deployment changed in @sap/cds-dk 8.9.0, 2025-03-31. Affects Runnable code.